The error codes are somewhat cryptic, but with the assistance of a BE RF Technical Services Engineer, we can assist you in finding the root cause. The codes are:

Admx.x - Loads, Synchronizes and set priorities for the various executables.
Troubleshooting - This alarm normally comes up with another alarm. Look for another alarm and address it.

logx.x - Logging package.
Troubleshooting - Clean edge connectors on installed cards, reseat, and reload software. If problem persist, unit needs to be returned to BE for repair.

cmtx.x - Configuration management (Settings, configurations, etc.).
Troubleshooting - Clean edge connectors on installed cards, reseat, and reload software. If problem persist, unit needs to be returned to BE for repair.

ppsx.x - pulse per second driver.
Troubleshooting - Clean edge connectors on installed cards, reseat, and reload software. If problem persist, unit needs to be returned to BE for repair.

eeix.x - Exgine interface.
Troubleshooting - Reload software and or replace audio board and reload software

l1ctx.x - Layer 1 Control.
Troubleshooting - Clean edge connectors on installed cards, reseat, and reload software. If problem persist, unit needs to be returned to BE for repair.

l2smxtx.x - Layer 2 (data mux).
Troubleshooting - Clean edge connectors on installed cards, reseat, and reload software. If problem persist, unit needs to be returned to BE for repair.

l4mpatx.x - Layer 4 ( HDC encoding).
Troubleshooting - Reload software and or replace motherboard and reload software.

l5mpatx.x - Audio processing & audio card drivers.
Troubleshooting - Intermittent audio board causing software to crash. Reload software and or replace audio board and reload software.

suitx.x - Station user interface.
Troubleshooting - Replace SIC card and reload software.

tsmx.x - Time space module (i.e. GPS).
Troubleshooting - Light Red, cable not hooked up or bad on back of unit. (GPS data in - GPS data out). Light Green, GPS not locked

lmtx.x - Layer Manager.
Troubleshooting - Clean edge connectors on installed cards, reseat, and reload software. If problem persist, unit needs to be returned to BE for repair.

guitx.x - GUI.
Troubleshooting - Reload software.

sistx.x - SIS.
Troubleshooting - Clean edge connectors on installed cards, reseat, and reload software. If problem persist, unit needs to be returned to BE for repair.

eltx.x - Exciter Link.
Troubleshooting - Clean edge connectors on installed cards, reseat, and reload software. If problem persist, unit needs to be returned to BE for repair.

eltmgx.x - Exciter Link manager.
Troubleshooting - Clean edge connectors on installed cards, reseat, and reload software. If problem persist, unit needs to be returned to BE for repair.

verx.x - Version control.
Troubleshooting - Clean edge connectors on installed cards, reseat, and reload software. If problem persist, unit needs to be returned to BE for repair.

bwamtx.x - Bandwidth manager for dynamic configuration changes.
Troubleshooting - Clean edge connectors on installed cards, reseat, and reload software. If problem persist, unit needs to be returned to BE for repair.

hdptx.x - HDP.
Troubleshooting - Clean edge connectors on installed cards, reseat, and reload software. If problem persist, unit needs to be returned to BE for repair.

cmdx.x - Communications Services.
Troubleshooting - Clean edge connectors on installed cards, reseat, and reload software. If problem persist, unit needs to be returned to BE for repair.