ITMEX2GAPFILLER-MIB DEFINITIONS ::= BEGIN IMPORTS it FROM IT-MIB MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, Integer32, IpAddress FROM SNMPv2-SMI MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP, AGENT-CAPABILITIES FROM SNMPv2-CONF DateAndTime, DisplayString FROM SNMPv2-TC; itmex2gapfiller MODULE-IDENTITY LAST-UPDATED "201910110940Z" ORGANIZATION " ITELCO BROADCAST S.r.l., Italy " CONTACT-INFO "Contact: Web: https://www.itelco.tv Address: Via dell'innovazione 4, 05018 Orvieto (TR), Italy Telephone: +39 0763 960300" DESCRIPTION "This is the MIB file of ITMEX2GAPFILLER modulator. Copyright (c) 2018 Itelco s.r.l.(. All rights reserved. Reproduction of this document is authorized on the condition that the foregoing copyright notice is included." REVISION "201910110940Z" DESCRIPTION "SWITELCOGAPFILLER_P3_1_02_358 build 1615722157" ::= { it 40 } itmex2gapfillerSystem OBJECT IDENTIFIER ::= { itmex2gapfiller 1 } itmex2gapfillerMode OBJECT IDENTIFIER ::= { itmex2gapfiller 2 } itmex2gapfillerInput OBJECT IDENTIFIER ::= { itmex2gapfiller 3 } itmex2gapfillerOutput OBJECT IDENTIFIER ::= { itmex2gapfiller 4 } itmex2gapfillerGps OBJECT IDENTIFIER ::= { itmex2gapfiller 7 } itmex2gapfillerChannelFilters OBJECT IDENTIFIER ::= { itmex2gapfiller 8 } itmex2gapfillerMonitor OBJECT IDENTIFIER ::= { itmex2gapfiller 12 } itmex2gapfillerTest OBJECT IDENTIFIER ::= { itmex2gapfiller 13 } itmex2gapfillerAlarm OBJECT IDENTIFIER ::= { itmex2gapfiller 14 } itmex2gapfillerPreset OBJECT IDENTIFIER ::= { itmex2gapfiller 15 } itmex2gapfillerEventlog OBJECT IDENTIFIER ::= { itmex2gapfiller 16 } itmex2gapfillerComms OBJECT IDENTIFIER ::= { itmex2gapfiller 17 } itmex2gapfillerPrecorrect OBJECT IDENTIFIER ::= { itmex2gapfiller 25 } itmex2gapfillerReception OBJECT IDENTIFIER ::= { itmex2gapfiller 26 } itmex2gapfillerBackplane OBJECT IDENTIFIER ::= { itmex2gapfiller 27 } itmex2gapfillerNotifs OBJECT IDENTIFIER ::= { itmex2gapfiller 64 } itmex2gapfillerConformance OBJECT IDENTIFIER ::= { itmex2gapfiller 100 } itmex2gapfillerCompliances OBJECT IDENTIFIER ::= { itmex2gapfillerConformance 1 } -- -- -- itmex2gapfiller System sub-tree -- itmex2gapfillerSystemInstrumentFW1Rev OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The instrument FW1 revision" ::= { itmex2gapfillerSystem 7 } itmex2gapfillerSystemInstrumentFW1RevBL OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The instrument FW1 BL revision" ::= { itmex2gapfillerSystem 8 } itmex2gapfillerSystemInstrumentFW2Rev OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The instrument FW2 revision" ::= { itmex2gapfillerSystem 9 } itmex2gapfillerSystemInstrumentFW2RevBL OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The instrument FW2 BL revision" ::= { itmex2gapfillerSystem 10 } itmex2gapfillerSystemInstrumentFW3Rev OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The instrument FW3 revision" ::= { itmex2gapfillerSystem 11 } itmex2gapfillerSystemInstrumentFW4Rev OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The instrument FW4 revision" ::= { itmex2gapfillerSystem 12 } itmex2gapfillerSystemInstrumentPCBRev OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The instrument PCB revision" ::= { itmex2gapfillerSystem 13 } itmex2gapfillerSystemInstrumentCalibrationRev OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The instrument Calibration revision" ::= { itmex2gapfillerSystem 14 } itmex2gapfillerSystemInstrumentCalibrationDate OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The instrument Calibration date" ::= { itmex2gapfillerSystem 15 } itmex2gapfillerSystemReboot OBJECT-TYPE SYNTAX INTEGER { keeprunning(0), sameimage(1), otherimage(2), image0(3), image1(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "Force a reboot of the device on the designated image now." ::= { itmex2gapfillerSystem 16 } itmex2gapfillerSystemRebootDefaultConfig OBJECT-TYPE SYNTAX INTEGER { keeprunning(0), reboot(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Restore all parameters to factory default and reboot the device on the same image." ::= { itmex2gapfillerSystem 19 } itmex2gapfillerSystemDateTime OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The current date/time in local timezone of the device. Format is YYYY MM DD HH MM SS." ::= { itmex2gapfillerSystem 22 } itmex2gapfillerSystemImage0Version OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The image 0 version string." ::= { itmex2gapfillerSystem 24 } itmex2gapfillerSystemImage0InstalledDate OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "The date and time image 0 was installed." ::= { itmex2gapfillerSystem 25 } itmex2gapfillerSystemImage1version OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The image 1 version string." ::= { itmex2gapfillerSystem 26 } itmex2gapfillerSystemImage1InstalledDate OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "The date and time image 0 was installed." ::= { itmex2gapfillerSystem 27 } itmex2gapfillerSystemServiceLED OBJECT-TYPE SYNTAX INTEGER { off(0), on(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Control the Service LED on frontpanel." ::= { itmex2gapfillerSystem 28 } itmex2gapfillerSystemLanguage OBJECT-TYPE SYNTAX INTEGER { c(0), da-dk(1), ru-ru(2), es-es(3), pt-br(4), it-it(5), de-de(6), fr-fr(7) } MAX-ACCESS read-write STATUS current DESCRIPTION "Controls which language is used on web and facia. Change requires reboot." ::= { itmex2gapfillerSystem 33 } itmex2gapfillerSystemType OBJECT-TYPE SYNTAX INTEGER { modulator(0), repeater(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "The system type to start in on next reboot." ::= { itmex2gapfillerSystem 30 } itmex2gapfillerSystemModulationStandard OBJECT-TYPE SYNTAX INTEGER { dvbt(0), dvbt2(1), atsc(2), isdbt(3), iboc(4), dab(5), atsc30(6), atv(7), gapfiller(8), radio(9) } MAX-ACCESS read-write STATUS current DESCRIPTION "The Modulation Standard to start in on next reboot." ::= { itmex2gapfillerSystem 32 } itmex2gapfillerSystemCurrentImage OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The flash Image the device is currently booted from." ::= { itmex2gapfillerSystem 23 } itmex2gapfillerSystemInstrumentKU OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The instrument serial number." ::= { itmex2gapfillerSystem 1 } itmex2gapfillerSystemInstrumentType OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The product type designation." ::= { itmex2gapfillerSystem 2 } itmex2gapfillerSystemInstrumentOptions OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The options installed on this instrument." ::= { itmex2gapfillerSystem 6 } itmex2gapfillerSystemDateTimeSync OBJECT-TYPE SYNTAX INTEGER { manual(0), auto(1), gps(2), ntp(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "The method used to synchronize system RTC. Mode auto means use gps if available else ntp else manual." ::= { itmex2gapfillerSystem 20 } itmex2gapfillerSystemDateTimeSyncActual OBJECT-TYPE SYNTAX INTEGER { manual(0), auto(1), gps(2), ntp(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The actual method used to synchronize system RTC." ::= { itmex2gapfillerSystem 31 } itmex2gapfillerSystemTimezone OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The Time Zone used for displaying Data and Time." ::= { itmex2gapfillerSystem 21 } itmex2gapfillerSystemInstrumentSWRev OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The instrument Software Revision currently running." ::= { itmex2gapfillerSystem 3 } itmex2gapfillerSystemInstrumentBootLoaderRev OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The instrument Bootloader Software Revision." ::= { itmex2gapfillerSystem 4 } itmex2gapfillerSystemInstrumentKernelRev OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The instrument O/S Kernel Version." ::= { itmex2gapfillerSystem 5 } itmex2gapfillerSystemOperationOnTime OBJECT-TYPE SYNTAX Integer32 UNITS "1 secs" MAX-ACCESS read-only STATUS current DESCRIPTION "Number of seconds this unit has been turned on since production." ::= { itmex2gapfillerSystem 34 } itmex2gapfillerSystemOperationOnAirTime OBJECT-TYPE SYNTAX Integer32 UNITS "1 secs" MAX-ACCESS read-only STATUS current DESCRIPTION "Number of seconds this unit has been unmuted since production." ::= { itmex2gapfillerSystem 35 } itmex2gapfillerSystemOperationNumberOfBoots OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of times this unit has been booted since last factory default restore." ::= { itmex2gapfillerSystem 36 } itmex2gapfillerSystemBackplaneid OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "ID of the backplane the device is plugged into" ::= { itmex2gapfillerSystem 40 } itmex2gapfillerSystemBackplaneIdRaw OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Raw ID of the backplane the device is plugged into" ::= { itmex2gapfillerSystem 41 } itmex2gapfillerSystemBackplaneIdPcb OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "PCB version of the backplane the device is plugged into" ::= { itmex2gapfillerSystem 42 } itmex2gapfillerSystemBackplaneIdCableOptions OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Cable options of the backplane the device is plugged into" ::= { itmex2gapfillerSystem 43 } itmex2gapfillerSystemBackplaneIdMAnuf OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Manufacture ID of the backplane the device is plugged into" ::= { itmex2gapfillerSystem 44 } itmex2gapfillerSystemBackplaneCalibrationDate OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Calibration date of the backplane the device is plugged into" ::= { itmex2gapfillerSystem 45 } itmex2gapfillerSystemBackplaneCalibrationSw OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Calibration SW version of the backplane the device is plugged into" ::= { itmex2gapfillerSystem 46 } itmex2gapfillerSystemBackplaneIdPartlist OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Partlist version of the backplane the device is plugged into" ::= { itmex2gapfillerSystem 47 } -- Scheduled Action table -- itmex2gapfillerSystemScheduledActionTable OBJECT-TYPE SYNTAX SEQUENCE OF Itmex2gapfillerSystemScheduledActionEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains the scheduled actions" ::= { itmex2gapfillerSystem 50 } itmex2gapfillerSystemScheduledActionEntry OBJECT-TYPE SYNTAX Itmex2gapfillerSystemScheduledActionEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry for the scheduled action" INDEX { itmex2gapfillerSystemScheduledActionID } ::= { itmex2gapfillerSystemScheduledActionTable 1 } Itmex2gapfillerSystemScheduledActionEntry ::= SEQUENCE { itmex2gapfillerSystemScheduledActionID Integer32, itmex2gapfillerSystemScheduledActionRecurrence INTEGER, itmex2gapfillerSystemScheduledActionHour Integer32, itmex2gapfillerSystemScheduledActionMinute Integer32, itmex2gapfillerSystemScheduledActionWeekday INTEGER, itmex2gapfillerSystemScheduledActionMonthDay Integer32, itmex2gapfillerSystemScheduledActionDate DisplayString, itmex2gapfillerSystemScheduledActionRandomDelay Integer32, itmex2gapfillerSystemScheduledActionAction INTEGER, itmex2gapfillerSystemScheduledActionRepeaterMode INTEGER, itmex2gapfillerSystemScheduledActionPresetNo INTEGER, itmex2gapfillerSystemScheduledActionRebootImage INTEGER, itmex2gapfillerSystemScheduledActionRebootSystemType INTEGER, itmex2gapfillerSystemScheduledActionMute INTEGER, itmex2gapfillerSystemScheduledActionSWUpgradeProtocol INTEGER, itmex2gapfillerSystemScheduledActionSWUpgradeUsername DisplayString, itmex2gapfillerSystemScheduledActionSWUpgradePassword DisplayString, itmex2gapfillerSystemScheduledActionSWUpgradeImageServer DisplayString, itmex2gapfillerSystemScheduledActionSWUpgradeImagePath DisplayString } itmex2gapfillerSystemScheduledActionID OBJECT-TYPE SYNTAX Integer32 ( 1 .. 10 ) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Unique ID for this scheduled action entry" ::= { itmex2gapfillerSystemScheduledActionEntry 1 } itmex2gapfillerSystemScheduledActionRecurrence OBJECT-TYPE SYNTAX INTEGER { never(0), immediate(1), once(2), hourly(3), daily(4), weekly(5), monthly(6) } MAX-ACCESS read-write STATUS current DESCRIPTION "The interval at which this scheduled action entry will be executed" ::= { itmex2gapfillerSystemScheduledActionEntry 2 } itmex2gapfillerSystemScheduledActionHour OBJECT-TYPE SYNTAX Integer32 ( 0 .. 23 ) MAX-ACCESS read-write STATUS current DESCRIPTION "The recurrence hour used when itmex2gapfillerSystemScheduledActionRecurrence is once, hourly, dayly, weekly and monthly." ::= { itmex2gapfillerSystemScheduledActionEntry 3 } itmex2gapfillerSystemScheduledActionMinute OBJECT-TYPE SYNTAX Integer32 ( 0 .. 59 ) MAX-ACCESS read-write STATUS current DESCRIPTION "The recurrence minute used when itmex2gapfillerSystemScheduledActionRecurrence is once, hourly, dayly, weekly and monthly." ::= { itmex2gapfillerSystemScheduledActionEntry 4 } itmex2gapfillerSystemScheduledActionWeekday OBJECT-TYPE SYNTAX INTEGER { monday(0), tuesday(1), wednesday(2), thursday(3), friday(4), saturday(5), sunday(6) } MAX-ACCESS read-write STATUS current DESCRIPTION "The recurrence weekday used when itmex2gapfillerSystemScheduledActionRecurrence is weekly." ::= { itmex2gapfillerSystemScheduledActionEntry 5 } itmex2gapfillerSystemScheduledActionMonthDay OBJECT-TYPE SYNTAX Integer32 ( 1 .. 31 ) MAX-ACCESS read-write STATUS current DESCRIPTION "The recurrence day of the monthe used when itmex2gapfillerSystemScheduledActionRecurrence is monthly." ::= { itmex2gapfillerSystemScheduledActionEntry 6 } itmex2gapfillerSystemScheduledActionDate OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The recurrence date used when itmex2gapfillerSystemScheduledActionRecurrence is once. The format is dd/mm/yyyy." ::= { itmex2gapfillerSystemScheduledActionEntry 7 } itmex2gapfillerSystemScheduledActionRandomDelay OBJECT-TYPE SYNTAX Integer32 ( 0 .. 600 ) UNITS "secs" MAX-ACCESS read-write STATUS current DESCRIPTION "An extra random delay added before the action for this entry is executed. A setting of x means that a random delay between 0 and x seconds are added." ::= { itmex2gapfillerSystemScheduledActionEntry 8 } itmex2gapfillerSystemScheduledActionAction OBJECT-TYPE SYNTAX INTEGER { none(0), repeatermode(1), preset(2), swupgrade(3), reboot(4), mute(5) } MAX-ACCESS read-write STATUS current DESCRIPTION "The action for this entry is executed" ::= { itmex2gapfillerSystemScheduledActionEntry 9 } itmex2gapfillerSystemScheduledActionRepeaterMode OBJECT-TYPE SYNTAX INTEGER { auto(0), digital-iso-repeater(1), digital-transposer(2), analog-iso-repeater(3), analog-transposer(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "The new repeater mode to change to when itmex2gapfillerSystemScheduledActionAction of type repeatermode is executed" ::= { itmex2gapfillerSystemScheduledActionEntry 10 } itmex2gapfillerSystemScheduledActionPresetNo OBJECT-TYPE SYNTAX INTEGER { auto(0), digital-iso-repeater(1), digital-transposer(2), analog-iso-repeater(3), analog-transposer(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "The preset to load when itmex2gapfillerSystemScheduledActionAction of type preset is executed" ::= { itmex2gapfillerSystemScheduledActionEntry 11 } itmex2gapfillerSystemScheduledActionRebootImage OBJECT-TYPE SYNTAX INTEGER { sameimage(0), otherimage(1), image0(2), image1(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "The image to reboot to when itmex2gapfillerSystemScheduledActionAction of type reboot is executed" ::= { itmex2gapfillerSystemScheduledActionEntry 12 } itmex2gapfillerSystemScheduledActionRebootSystemType OBJECT-TYPE SYNTAX INTEGER { modulator(0), repeater(1), same(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The system type to reboot to when itmex2gapfillerSystemScheduledActionAction of type reboot is executed" ::= { itmex2gapfillerSystemScheduledActionEntry 13 } itmex2gapfillerSystemScheduledActionMute OBJECT-TYPE SYNTAX INTEGER { off(0), on(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "The mute mode to change into when itmex2gapfillerSystemScheduledActionAction of type mute is executed" ::= { itmex2gapfillerSystemScheduledActionEntry 14 } itmex2gapfillerSystemScheduledActionSWUpgradeProtocol OBJECT-TYPE SYNTAX INTEGER { http(0), ftp(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "The protocol to use into when itmex2gapfillerSystemScheduledActionAction of type swupgrade(3) is executed" ::= { itmex2gapfillerSystemScheduledActionEntry 15 } itmex2gapfillerSystemScheduledActionSWUpgradeUsername OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The username to use into when itmex2gapfillerSystemScheduledActionAction of type swupgrade(3) is executed" ::= { itmex2gapfillerSystemScheduledActionEntry 16 } itmex2gapfillerSystemScheduledActionSWUpgradePassword OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The password to use into when itmex2gapfillerSystemScheduledActionAction of type swupgrade(3) is executed" ::= { itmex2gapfillerSystemScheduledActionEntry 17 } itmex2gapfillerSystemScheduledActionSWUpgradeImageServer OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The server name to use into when itmex2gapfillerSystemScheduledActionAction of type swupgrade(3) is executed" ::= { itmex2gapfillerSystemScheduledActionEntry 18 } itmex2gapfillerSystemScheduledActionSWUpgradeImagePath OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The image path name to use into when itmex2gapfillerSystemScheduledActionAction of type swupgrade(3) is executed" ::= { itmex2gapfillerSystemScheduledActionEntry 19 } -- -- itmex2gapfiller Mode sub-tree -- itmex2gapfillerReceptionRepeaterMode OBJECT-TYPE SYNTAX INTEGER { transposer(0), gapfiller(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Controls the repeater mode Gapfiller enables the echo cancellation algorithm, remember to connect cable to EC Sense connector If Set to gapfiller input frequency and frequency offset will be copied to output rf frequency and frequency offset" ::= { itmex2gapfillerReception 3 } itmex2gapfillerReceptionEcSenseLevel OBJECT-TYPE SYNTAX Integer32 UNITS "0.1 dBm" MAX-ACCESS read-only STATUS current DESCRIPTION "The current EC Sense level on the tuner." ::= { itmex2gapfillerReception 222 } itmex2gapfillerReceptionEcLoopGain OBJECT-TYPE SYNTAX Integer32 UNITS "0.1 dBm" MAX-ACCESS read-only STATUS current DESCRIPTION "The current EC Loopgain. When in transposer mode the value is always zero." ::= { itmex2gapfillerReception 223 } itmex2gapfillerReceptionEcSuppression OBJECT-TYPE SYNTAX Integer32 UNITS "0.1 dBm" MAX-ACCESS read-only STATUS current DESCRIPTION "The current EC Suppression. When in transposer mode the value is always zero." ::= { itmex2gapfillerReception 224 } itmex2gapfillerReceptionEcLGlimit OBJECT-TYPE SYNTAX Integer32 ( -200 .. 200 ) UNITS "0.1 dBm" MAX-ACCESS read-write STATUS current DESCRIPTION "Maximum userdefined limit of EC Loopgain" ::= { itmex2gapfillerReception 225 } itmex2gapfillerReceptionEcSenseSelect OBJECT-TYPE SYNTAX INTEGER { after(0), before(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "0: No filter transfer function is present in the EC sense feedback. 1: A pseudo analog output channel filter is inserted in the EC sense path (to compensate for taking the ec sense before the channel filter) When set, a pseudo output channel filter is inserted in the EC path. Use when e.c. sense is taken before the output filter." ::= { itmex2gapfillerReception 226 } itmex2gapfillerReceptionEcholist0Time OBJECT-TYPE SYNTAX Integer32 UNITS "0.1 dBm" MAX-ACCESS read-only STATUS current DESCRIPTION "The current echo list time element. When in transposer mode the value is always zero." ::= { itmex2gapfillerReception 230 } itmex2gapfillerReceptionEcholist1Time OBJECT-TYPE SYNTAX Integer32 UNITS "0.1 dBm" MAX-ACCESS read-only STATUS current DESCRIPTION "The current echo list time element. When in transposer mode the value is always zero." ::= { itmex2gapfillerReception 460 } itmex2gapfillerReceptionEcholist2Time OBJECT-TYPE SYNTAX Integer32 UNITS "0.1 dBm" MAX-ACCESS read-only STATUS current DESCRIPTION "The current echo list time element. When in transposer mode the value is always zero." ::= { itmex2gapfillerReception 690 } itmex2gapfillerReceptionEcholist3Time OBJECT-TYPE SYNTAX Integer32 UNITS "0.1 dBm" MAX-ACCESS read-only STATUS current DESCRIPTION "The current echo list time element. When in transposer mode the value is always zero." ::= { itmex2gapfillerReception 920 } itmex2gapfillerReceptionEcholist4Time OBJECT-TYPE SYNTAX Integer32 UNITS "0.1 dBm" MAX-ACCESS read-only STATUS current DESCRIPTION "The current echo list time element. When in transposer mode the value is always zero." ::= { itmex2gapfillerReception 1150 } itmex2gapfillerReceptionEcholist5Time OBJECT-TYPE SYNTAX Integer32 UNITS "0.1 dBm" MAX-ACCESS read-only STATUS current DESCRIPTION "The current echo list time element. When in transposer mode the value is always zero." ::= { itmex2gapfillerReception 1380 } itmex2gapfillerReceptionEcholist6Time OBJECT-TYPE SYNTAX Integer32 UNITS "0.1 dBm" MAX-ACCESS read-only STATUS current DESCRIPTION "The current echo list time element. When in transposer mode the value is always zero." ::= { itmex2gapfillerReception 1610 } itmex2gapfillerReceptionEcholist7Time OBJECT-TYPE SYNTAX Integer32 UNITS "0.1 dBm" MAX-ACCESS read-only STATUS current DESCRIPTION "The current echo list time element. When in transposer mode the value is always zero." ::= { itmex2gapfillerReception 1840 } itmex2gapfillerReceptionEcholist8Time OBJECT-TYPE SYNTAX Integer32 UNITS "0.1 dBm" MAX-ACCESS read-only STATUS current DESCRIPTION "The current echo list time element. When in transposer mode the value is always zero." ::= { itmex2gapfillerReception 2070 } itmex2gapfillerReceptionEcholist9Time OBJECT-TYPE SYNTAX Integer32 UNITS "0.1 dBm" MAX-ACCESS read-only STATUS current DESCRIPTION "The current echo list time element. When in transposer mode the value is always zero." ::= { itmex2gapfillerReception 2300 } itmex2gapfillerReceptionEcholist0Suppression OBJECT-TYPE SYNTAX Integer32 UNITS "0.1 dBm" MAX-ACCESS read-only STATUS current DESCRIPTION "The current echo list suppression element. When in transposer mode the value is always zero." ::= { itmex2gapfillerReception 231 } itmex2gapfillerReceptionEcholist1Suppression OBJECT-TYPE SYNTAX Integer32 UNITS "0.1 dBm" MAX-ACCESS read-only STATUS current DESCRIPTION "The current echo list suppression element. When in transposer mode the value is always zero." ::= { itmex2gapfillerReception 461 } itmex2gapfillerReceptionEcholist2Suppression OBJECT-TYPE SYNTAX Integer32 UNITS "0.1 dBm" MAX-ACCESS read-only STATUS current DESCRIPTION "The current echo list suppression element. When in transposer mode the value is always zero." ::= { itmex2gapfillerReception 691 } itmex2gapfillerReceptionEcholist3Suppression OBJECT-TYPE SYNTAX Integer32 UNITS "0.1 dBm" MAX-ACCESS read-only STATUS current DESCRIPTION "The current echo list suppression element. When in transposer mode the value is always zero." ::= { itmex2gapfillerReception 921 } itmex2gapfillerReceptionEcholist4Suppression OBJECT-TYPE SYNTAX Integer32 UNITS "0.1 dBm" MAX-ACCESS read-only STATUS current DESCRIPTION "The current echo list suppression element. When in transposer mode the value is always zero." ::= { itmex2gapfillerReception 1151 } itmex2gapfillerReceptionEcholist5Suppression OBJECT-TYPE SYNTAX Integer32 UNITS "0.1 dBm" MAX-ACCESS read-only STATUS current DESCRIPTION "The current echo list suppression element. When in transposer mode the value is always zero." ::= { itmex2gapfillerReception 1381 } itmex2gapfillerReceptionEcholist6Suppression OBJECT-TYPE SYNTAX Integer32 UNITS "0.1 dBm" MAX-ACCESS read-only STATUS current DESCRIPTION "The current echo list suppression element. When in transposer mode the value is always zero." ::= { itmex2gapfillerReception 1611 } itmex2gapfillerReceptionEcholist7Suppression OBJECT-TYPE SYNTAX Integer32 UNITS "0.1 dBm" MAX-ACCESS read-only STATUS current DESCRIPTION "The current echo list suppression element. When in transposer mode the value is always zero." ::= { itmex2gapfillerReception 1841 } itmex2gapfillerReceptionEcholist8Suppression OBJECT-TYPE SYNTAX Integer32 UNITS "0.1 dBm" MAX-ACCESS read-only STATUS current DESCRIPTION "The current echo list suppression element. When in transposer mode the value is always zero." ::= { itmex2gapfillerReception 2071 } itmex2gapfillerReceptionEcholist9Suppression OBJECT-TYPE SYNTAX Integer32 UNITS "0.1 dBm" MAX-ACCESS read-only STATUS current DESCRIPTION "The current echo list suppression element. When in transposer mode the value is always zero." ::= { itmex2gapfillerReception 2301 } itmex2gapfillerReceptionGainControl OBJECT-TYPE SYNTAX INTEGER { auto(0), freeze(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Controls the gain function mode. Allways 'AUTO' after boot" ::= { itmex2gapfillerReception 9 } itmex2gapfillerReceptionAGCMode OBJECT-TYPE SYNTAX INTEGER { slow(0), fast(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Controls the AGC function mode." ::= { itmex2gapfillerReception 30 } itmex2gapfillerReceptionBandwidth OBJECT-TYPE SYNTAX INTEGER { r5(0), r6(1), r7(2), r8(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Controls reception bandwidth" ::= { itmex2gapfillerReception 23 } itmex2gapfillerReceptionRFFrequency OBJECT-TYPE SYNTAX Integer32 ( 30000000 .. 860000000 ) UNITS "1 hz" MAX-ACCESS read-write STATUS current DESCRIPTION "Defines the reception frequency for the tuner." ::= { itmex2gapfillerReception 1 } itmex2gapfillerReceptionRFFrequencyOffset OBJECT-TYPE SYNTAX Integer32 ( -500000 .. 500000 ) UNITS "1 hz" MAX-ACCESS read-write STATUS current DESCRIPTION "Defines the offset to be added to the reception frequency for the tuner." ::= { itmex2gapfillerReception 2 } itmex2gapfillerReceptionRFPolarity OBJECT-TYPE SYNTAX INTEGER { norm(0), inv(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Controls RF reception Polarity" ::= { itmex2gapfillerReception 24 } itmex2gapfillerReceptionRFSquelchEnable OBJECT-TYPE SYNTAX INTEGER { off(0), on(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Controls the squelch function." ::= { itmex2gapfillerReception 6 } itmex2gapfillerReceptionRFSquelchThreshold OBJECT-TYPE SYNTAX Integer32 ( -800 .. -70 ) UNITS "0.1 dBm" MAX-ACCESS read-write STATUS current DESCRIPTION "Defines the Squelch function threshold." ::= { itmex2gapfillerReception 7 } itmex2gapfillerReceptionRFSquelchHysteresis OBJECT-TYPE SYNTAX Integer32 ( 10 .. 500 ) UNITS "0.01 dB" MAX-ACCESS read-write STATUS current DESCRIPTION "Defines the Squelch function Hysteresis." ::= { itmex2gapfillerReception 8 } itmex2gapfillerReceptionRFTrackingFilterEnable OBJECT-TYPE SYNTAX INTEGER { off(0), on(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Controls the Reception RF Tracking Filter." ::= { itmex2gapfillerReception 35 } itmex2gapfillerReceptionRFInputLevel OBJECT-TYPE SYNTAX Integer32 UNITS "0.1 dBm" MAX-ACCESS read-only STATUS current DESCRIPTION "The current RF input level on the tuner." ::= { itmex2gapfillerReception 21 } itmex2gapfillerReceptionRFInputLevelThreshold OBJECT-TYPE SYNTAX Integer32 ( -8000 .. -700 ) UNITS "0.01 dBm" MAX-ACCESS read-write STATUS current DESCRIPTION "Defines the Input level threshold." ::= { itmex2gapfillerReception 26 } itmex2gapfillerReceptionRFInputLevelHysteresis OBJECT-TYPE SYNTAX Integer32 ( 10 .. 500 ) UNITS "0.01 dB" MAX-ACCESS read-write STATUS current DESCRIPTION "Defines the Input Level Hysteresis." ::= { itmex2gapfillerReception 25 } itmex2gapfillerReceptionTunerHWVersion OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The tuner HW version." ::= { itmex2gapfillerReception 40 } itmex2gapfillerReceptionTunerHWType OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The tuner HW type." ::= { itmex2gapfillerReception 41 } itmex2gapfillerReceptionTunerHWID OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The tuner HW ID." ::= { itmex2gapfillerReception 42 } itmex2gapfillerReceptionTunerHWSerialNumber OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The tuner HW Serial Number." ::= { itmex2gapfillerReception 43 } itmex2gapfillerReceptionTunerHWCalibrationDate OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The tuner HW Calibration Date." ::= { itmex2gapfillerReception 44 } itmex2gapfillerReceptionTunerHWCalibrationDataVersion OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The tuner HW Calibration Data Version." ::= { itmex2gapfillerReception 45 } itmex2gapfillerReceptionTunerHWCalibrationSWVersion OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The tuner HW Calibration SW Version." ::= { itmex2gapfillerReception 46 } itmex2gapfillerReceptionTunerSWVersion OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The tuner SW version." ::= { itmex2gapfillerReception 47 } -- -- itmex2gapfiller Input sub-tree -- itmex2gapfillerInputRefOcxoDevType OBJECT-TYPE SYNTAX INTEGER { tcxo-int(0), ocxo-pt3710-10(1), ocxo-pt3710-20(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Type of TCXO/OCXO" ::= { itmex2gapfillerInput 90 } itmex2gapfillerInputRefOcxoCalDate OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Calibration Date" ::= { itmex2gapfillerInput 91 } itmex2gapfillerInputRefOcxoCalVer OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Calibration SW Version" ::= { itmex2gapfillerInput 92 } itmex2gapfillerInputRefDirection OBJECT-TYPE SYNTAX INTEGER { input(0), output(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "monitors the Reference signal direction. state: - inputOutput[inputOutput_INPUT] - inputOutput[inputOutput_OUTPUT]" ::= { itmex2gapfillerInput 1 } itmex2gapfillerInputRefSource OBJECT-TYPE SYNTAX INTEGER { auto(0), ext(1), int(2), gps(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Defines the input reference synchronisation source. If the value AUTO is chosen, the source is chosen automatically between available sources. The order of choice is GPS->EXT10MHz->INT. If the value EXT is chosen, the external clock is chosen as source If the value INT is chosen, the internal clock is chosen as source. If the value GPS is chosen, the GNSS 1PPS clock is chosen as source." ::= { itmex2gapfillerInput 2 } itmex2gapfillerInputRefStatus OBJECT-TYPE SYNTAX INTEGER { external(0), external-10mhz(1), external-1pps(2), internal(3), gnss(4), asi1(5), asi2(6), ndel(7) } MAX-ACCESS read-only STATUS current DESCRIPTION "returns the current input reference synchronisation source." ::= { itmex2gapfillerInput 11 } itmex2gapfillerInputRef10MhzImpedance OBJECT-TYPE SYNTAX INTEGER { o-50(0), himp(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Defines the external 10 MHz input reference synchronisation source impedance. The value is either 50O or high impedance." ::= { itmex2gapfillerInput 3 } itmex2gapfillerInputRef10MhzHoldoverDelay OBJECT-TYPE SYNTAX Integer32 ( 0 .. 172800 ) MAX-ACCESS read-write STATUS current DESCRIPTION "Defines the external 10 MHz input reference synchronisation source impedance. The value is either 50O or high impedance." ::= { itmex2gapfillerInput 7 } itmex2gapfillerInputRef10MhzHoldoverForever OBJECT-TYPE SYNTAX INTEGER { no(0), yes(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "The holdover delay for input reference source 10MHz failure is forever" ::= { itmex2gapfillerInput 8 } itmex2gapfillerInputRef1PPSImpedance OBJECT-TYPE SYNTAX INTEGER { o-50(0), himp(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Defines the external 1 PPS input reference synchronisation source impedance. The value is either 50ohm or high impedance." ::= { itmex2gapfillerInput 4 } itmex2gapfillerInputRef1PPSHoldoverDelay OBJECT-TYPE SYNTAX Integer32 ( 0 .. 172800 ) MAX-ACCESS read-write STATUS current DESCRIPTION "Defines the external 1 PPS input reference synchronisation source impedance. The value is either 50ohm or high impedance." ::= { itmex2gapfillerInput 9 } itmex2gapfillerInputRef1PPSHoldoverForever OBJECT-TYPE SYNTAX INTEGER { no(0), yes(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "The holdover delay for input reference source 1 pps failure is forever" ::= { itmex2gapfillerInput 10 } itmex2gapfillerInputRef1PPSTrigSlope OBJECT-TYPE SYNTAX INTEGER { rising(0), falling(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Defines the trigger edge of the external 1PPS input reference clock. The value is either RISING or FALLING." ::= { itmex2gapfillerInput 5 } itmex2gapfillerInputRef1PPSTrigLevel OBJECT-TYPE SYNTAX Integer32 ( 10 .. 16 ) UNITS "0.1 v" MAX-ACCESS read-write STATUS current DESCRIPTION "Defines the trigger level of the external 1PPS input reference clock" ::= { itmex2gapfillerInput 6 } itmex2gapfillerInputASIAutoRoutingDelayHp2Lp OBJECT-TYPE SYNTAX Integer32 ( 0 .. 300 ) UNITS "1 secs" MAX-ACCESS read-write STATUS current DESCRIPTION "The delay before performing the actual substitution where TS-Primary -> TS-LP and TS-Secondary -> TS-HP" ::= { itmex2gapfillerInput 15 } itmex2gapfillerInputASIAutoRoutingDelayLp2Hp OBJECT-TYPE SYNTAX Integer32 ( 0 .. 300 ) UNITS "1 secs" MAX-ACCESS read-write STATUS current DESCRIPTION "The delay before performing the actual substitution where TS-Primary -> TS-HP and TS-Secondary -> TS-LP" ::= { itmex2gapfillerInput 16 } itmex2gapfillerInputASITSPrimarySource OBJECT-TYPE SYNTAX INTEGER { asi-in-1(0), asi-in-2(1), satRecv(6) } MAX-ACCESS read-write STATUS current DESCRIPTION "The TS-Primary input source connector selected" ::= { itmex2gapfillerInput 12 } itmex2gapfillerInputASITSSecondarySource OBJECT-TYPE SYNTAX INTEGER { asi-in-1(0), asi-in-2(1), satRecv(6) } MAX-ACCESS read-write STATUS current DESCRIPTION "The TS-Secondary input source connector selected" ::= { itmex2gapfillerInput 13 } itmex2gapfillerInputASIAutoRoutingPolicy OBJECT-TYPE SYNTAX INTEGER { only-use-primary(0), only-use-secondary(1), use-primary-if-available(2), use-any-available(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "The policy to use for TS auto routing" ::= { itmex2gapfillerInput 14 } itmex2gapfillerInputTSPrimaryStatus OBJECT-TYPE SYNTAX INTEGER { available(0), unavailable(1), nosync(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The current state for TS-Primary. Unavailable means violation of alarms." ::= { itmex2gapfillerInput 36 } itmex2gapfillerInputTSSecondaryStatus OBJECT-TYPE SYNTAX INTEGER { available(0), unavailable(1), nosync(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The current state for TS-Secondary. Unavailable means violation of alarms." ::= { itmex2gapfillerInput 37 } itmex2gapfillerInputTSHp OBJECT-TYPE SYNTAX INTEGER { asi-in-1(0), asi-in-2(1), satRecv(6) } MAX-ACCESS read-only STATUS current DESCRIPTION "The input source currently On Air. (TS-HP)" ::= { itmex2gapfillerInput 38 } itmex2gapfillerInputTSLp OBJECT-TYPE SYNTAX INTEGER { asi-in-1(0), asi-in-2(1), satRecv(6) } MAX-ACCESS read-only STATUS current DESCRIPTION "The input source currently used as backup. (TS-LP)" ::= { itmex2gapfillerInput 39 } itmex2gapfillerInputEffectiveAutoroutingPolicy OBJECT-TYPE SYNTAX INTEGER { only-primary(0), only-secondary(1), prefer-primary(2), any-available(3), seamless(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "Reflects the effective Autorouting Policy" ::= { itmex2gapfillerInput 40 } itmex2gapfillerInputTSHpBitrate OBJECT-TYPE SYNTAX Integer32 UNITS "Kb/s" MAX-ACCESS read-only STATUS current DESCRIPTION "Current bitrate for On Air TS. (TS-HP)" ::= { itmex2gapfillerInput 41 } itmex2gapfillerInputTSLpBitrate OBJECT-TYPE SYNTAX Integer32 UNITS "Kb/s" MAX-ACCESS read-only STATUS current DESCRIPTION "Current bitrate for Backup TS. (TS-LP)" ::= { itmex2gapfillerInput 47 } -- -- itmex2gapfiller Output sub-tree -- itmex2gapfillerOutputBandwidth OBJECT-TYPE SYNTAX Integer32 ( 60 .. 80 ) UNITS "0.1 MHz" MAX-ACCESS read-write STATUS current DESCRIPTION "Output Bandwidth" ::= { itmex2gapfillerOutput 4 } itmex2gapfillerOutputChannel OBJECT-TYPE SYNTAX Integer32 ( 21 .. 69 ) MAX-ACCESS read-write STATUS current DESCRIPTION "Channel settings" ::= { itmex2gapfillerOutput 5 } itmex2gapfillerOutputSynchronized OBJECT-TYPE SYNTAX INTEGER { not-synchronized(0), synchronized(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "The values of itmex2gapfillerOutputRfFrequency, itmex2gapfillerOutputBandwidth and itmex2gapfillerOutputChannel are synchronized aaccording to freq = (bw * channel) + 306000000." ::= { itmex2gapfillerOutput 6 } itmex2gapfillerOutputPowerLevel OBJECT-TYPE SYNTAX Integer32 ( 280 .. 490 ) UNITS "0.1 dBm" MAX-ACCESS read-write STATUS current DESCRIPTION "The desired output power level." ::= { itmex2gapfillerOutput 9 } itmex2gapfillerOutputMode OBJECT-TYPE SYNTAX INTEGER { normal(0), standby(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Control RF output mode" ::= { itmex2gapfillerOutput 1 } itmex2gapfillerOutputEffectiveLevel OBJECT-TYPE SYNTAX Integer32 UNITS "0.01 dBm" MAX-ACCESS read-only STATUS current DESCRIPTION "Effective RF Output Level" ::= { itmex2gapfillerOutput 17 } itmex2gapfillerOutputActualLevel OBJECT-TYPE SYNTAX Integer32 UNITS "0.01 dBm" MAX-ACCESS read-only STATUS current DESCRIPTION "Actual RF Output Level" ::= { itmex2gapfillerOutput 18 } itmex2gapfillerOutputPolarity OBJECT-TYPE SYNTAX INTEGER { norm(0), inv(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Control output polarity" ::= { itmex2gapfillerOutput 8 } itmex2gapfillerOutputRfFrequency OBJECT-TYPE SYNTAX Integer32 ( 30000000 .. 860000000 ) UNITS "1 Hz" MAX-ACCESS read-write STATUS current DESCRIPTION "Output RF frequency" ::= { itmex2gapfillerOutput 2 } itmex2gapfillerOutputRfFrequencyOffset OBJECT-TYPE SYNTAX Integer32 ( -8388608 .. 8388607 ) UNITS "1 Hz" MAX-ACCESS read-write STATUS current DESCRIPTION "Output RF frequency offset" ::= { itmex2gapfillerOutput 10 } itmex2gapfillerOutputRfLevel OBJECT-TYPE SYNTAX Integer32 ( -1000 .. 1000 ) UNITS "0.01 dBm" MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the output level in 0.01dB steps, 0dB is +6dBm on IF, 0dBm on RF" ::= { itmex2gapfillerOutput 3 } itmex2gapfillerOutputRfCableMode OBJECT-TYPE SYNTAX INTEGER { none(0), const(1), auto(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Control whether Cable Level loss compensation should be enabled" ::= { itmex2gapfillerOutput 50 } itmex2gapfillerOutputRfCableConstantLevelOffset OBJECT-TYPE SYNTAX Integer32 ( -10000 .. 10000 ) UNITS "0.001 dBm" MAX-ACCESS read-write STATUS current DESCRIPTION "Constant level offset to add to RF Output level. Only used if mode is Constant." ::= { itmex2gapfillerOutput 51 } itmex2gapfillerOutputRfCableFrequencyLevelOffset0 OBJECT-TYPE SYNTAX Integer32 ( -10000 .. 10000 ) UNITS "0.001 dBm" MAX-ACCESS read-write STATUS current DESCRIPTION "Frequency depedent level offset to add to RF Output level. Only used if mode is Automatic." ::= { itmex2gapfillerOutput 52 } itmex2gapfillerOutputRfCableFrequencyLevelOffset1 OBJECT-TYPE SYNTAX Integer32 ( -10000 .. 10000 ) UNITS "0.001 dBm" MAX-ACCESS read-write STATUS current DESCRIPTION "Frequency depedent level offset to add to RF Output level. Only used if mode is Automatic." ::= { itmex2gapfillerOutput 53 } itmex2gapfillerOutputRfCableFrequencyLevelOffset2 OBJECT-TYPE SYNTAX Integer32 ( -10000 .. 10000 ) UNITS "0.001 dBm" MAX-ACCESS read-write STATUS current DESCRIPTION "Frequency depedent level offset to add to RF Output level. Only used if mode is Automatic." ::= { itmex2gapfillerOutput 54 } itmex2gapfillerOutputRfCableFrequencyLevelOffset3 OBJECT-TYPE SYNTAX Integer32 ( -10000 .. 10000 ) UNITS "0.001 dBm" MAX-ACCESS read-write STATUS current DESCRIPTION "Frequency depedent level offset to add to RF Output level. Only used if mode is Automatic." ::= { itmex2gapfillerOutput 55 } itmex2gapfillerOutputRfCableFrequencyLevelOffset4 OBJECT-TYPE SYNTAX Integer32 ( -10000 .. 10000 ) UNITS "0.001 dBm" MAX-ACCESS read-write STATUS current DESCRIPTION "Frequency depedent level offset to add to RF Output level. Only used if mode is Automatic." ::= { itmex2gapfillerOutput 56 } itmex2gapfillerOutputRfCableFrequencyLevelOffset5 OBJECT-TYPE SYNTAX Integer32 ( -10000 .. 10000 ) UNITS "0.001 dBm" MAX-ACCESS read-write STATUS current DESCRIPTION "Frequency depedent level offset to add to RF Output level. Only used if mode is Automatic." ::= { itmex2gapfillerOutput 57 } itmex2gapfillerOutputRfDetectedActualLevel OBJECT-TYPE SYNTAX Integer32 UNITS "0.01 dBm" MAX-ACCESS read-only STATUS current DESCRIPTION "Detected Output Level for RF" ::= { itmex2gapfillerOutput 19 } itmex2gapfillerOutputRfDetectedLowerLevelLimit OBJECT-TYPE SYNTAX Integer32 ( 2 .. 50 ) UNITS "0.1 dB" MAX-ACCESS read-write STATUS current DESCRIPTION "Limit to how much lower the detected RF output level can be than the configured level." ::= { itmex2gapfillerOutput 20 } itmex2gapfillerOutputRfDetectedLowerLevelcontrol OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Controls whether the lower limit for RF output level is enforced." ::= { itmex2gapfillerOutput 21 } itmex2gapfillerOutputRfDetectedHigherLevelLimit OBJECT-TYPE SYNTAX Integer32 ( 2 .. 50 ) UNITS "0.1 dB" MAX-ACCESS read-write STATUS current DESCRIPTION "Limit to how much higher the detected RF output level can be than the configured level." ::= { itmex2gapfillerOutput 22 } itmex2gapfillerOutputRfDetectedHigherLevelcontrol OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Controls whether the higher limit for RF output level is enforced." ::= { itmex2gapfillerOutput 23 } itmex2gapfillerOutputRfAlcControl OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Controls whether the ALC system is enabled or disabled." ::= { itmex2gapfillerOutput 30 } itmex2gapfillerOutputRfAlcSense OBJECT-TYPE SYNTAX INTEGER { rfsense1(0), rfsense2(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Controls which sense port is used by the ALC system if the ALC is enabled." ::= { itmex2gapfillerOutput 31 } itmex2gapfillerOutputRfAlcSetpointPort1 OBJECT-TYPE SYNTAX Integer32 ( -11000 .. 11000 ) UNITS "0.01 dB" MAX-ACCESS read-write STATUS current DESCRIPTION "ALC setpoint for RF Sense Port 1" ::= { itmex2gapfillerOutput 32 } itmex2gapfillerOutputRfAlcSetpointPort2 OBJECT-TYPE SYNTAX Integer32 ( -11000 .. 11000 ) UNITS "0.01 dB" MAX-ACCESS read-write STATUS current DESCRIPTION "ALC setpoint for RF Sense Port 2" ::= { itmex2gapfillerOutput 33 } itmex2gapfillerOutputRfAlcMarkSetpoint1 OBJECT-TYPE SYNTAX INTEGER { noop(0), activate(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Mark the current RF output level as setpoint for RF Sense Port1." ::= { itmex2gapfillerOutput 36 } itmex2gapfillerOutputRfAlcMarkSetpoint2 OBJECT-TYPE SYNTAX INTEGER { noop(0), activate(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Mark the current RF output level as setpoint for RF Sense Port2." ::= { itmex2gapfillerOutput 37 } itmex2gapfillerOutputRfAlcStatus OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "Status for whether the ALC system is enabled or disabled." ::= { itmex2gapfillerOutput 34 } itmex2gapfillerOutputRfAlcStatusInformation OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Information on the state of the ALC system." ::= { itmex2gapfillerOutput 35 } itmex2gapfillerOutputMute OBJECT-TYPE SYNTAX INTEGER { off(0), on(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Control Output Rf Mute User request. Output mute. When set the mute reason UserRequest is ORed into the mute reason set. When read it is the logical OR of all mute reasons" ::= { itmex2gapfillerOutput 7 } itmex2gapfillerOutputMuteReason OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Mute reason." ::= { itmex2gapfillerOutput 58 } itmex2gapfillerOutputHpaStatus1Text OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Information on the text field." ::= { itmex2gapfillerOutput 1000 } itmex2gapfillerOutputHpaStatus2Text OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Information on the text field." ::= { itmex2gapfillerOutput 1002 } itmex2gapfillerOutputHpaStatus3Text OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Information on the text field." ::= { itmex2gapfillerOutput 1004 } itmex2gapfillerOutputHpaStatus4Text OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Information on the text field." ::= { itmex2gapfillerOutput 1006 } itmex2gapfillerOutputHpaStatus5Text OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Information on the text field." ::= { itmex2gapfillerOutput 1008 } itmex2gapfillerOutputHpaStatus6Text OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Information on the text field." ::= { itmex2gapfillerOutput 1010 } itmex2gapfillerOutputHpaStatus7Text OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Information on the text field." ::= { itmex2gapfillerOutput 1012 } itmex2gapfillerOutputHpaStatus8Text OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Information on the text field." ::= { itmex2gapfillerOutput 1014 } itmex2gapfillerOutputHpaStatus9Text OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Information on the text field." ::= { itmex2gapfillerOutput 1016 } itmex2gapfillerOutputHpaStatus10Text OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Information on the text field." ::= { itmex2gapfillerOutput 1018 } itmex2gapfillerOutputHpaStatus11Text OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Information on the text field." ::= { itmex2gapfillerOutput 1020 } itmex2gapfillerOutputHpaStatus12Text OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Information on the text field." ::= { itmex2gapfillerOutput 1022 } itmex2gapfillerOutputHpaStatus1Param OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Information on the param field." ::= { itmex2gapfillerOutput 1001 } itmex2gapfillerOutputHpaStatus2Param OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Information on the param field." ::= { itmex2gapfillerOutput 1003 } itmex2gapfillerOutputHpaStatus3Param OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Information on the param field." ::= { itmex2gapfillerOutput 1005 } itmex2gapfillerOutputHpaStatus4Param OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Information on the param field." ::= { itmex2gapfillerOutput 1007 } itmex2gapfillerOutputHpaStatus5Param OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Information on the param field." ::= { itmex2gapfillerOutput 1009 } itmex2gapfillerOutputHpaStatus6Param OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Information on the param field." ::= { itmex2gapfillerOutput 1011 } itmex2gapfillerOutputHpaStatus7Param OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Information on the param field." ::= { itmex2gapfillerOutput 1013 } itmex2gapfillerOutputHpaStatus8Param OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Information on the param field." ::= { itmex2gapfillerOutput 1015 } itmex2gapfillerOutputHpaStatus9Param OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Information on the param field." ::= { itmex2gapfillerOutput 1017 } itmex2gapfillerOutputHpaStatus10Param OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Information on the param field." ::= { itmex2gapfillerOutput 1019 } itmex2gapfillerOutputHpaStatus11Param OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Information on the param field." ::= { itmex2gapfillerOutput 1021 } itmex2gapfillerOutputHpaStatus12Param OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Information on the param field." ::= { itmex2gapfillerOutput 1023 } itmex2gapfillerOutputHpaAlarm1Text OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Information on the text field." ::= { itmex2gapfillerOutput 1030 } itmex2gapfillerOutputHpaAlarm2Text OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Information on the text field." ::= { itmex2gapfillerOutput 1032 } itmex2gapfillerOutputHpaAlarm3Text OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Information on the text field." ::= { itmex2gapfillerOutput 1034 } itmex2gapfillerOutputHpaAlarm4Text OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Information on the text field." ::= { itmex2gapfillerOutput 1036 } itmex2gapfillerOutputHpaAlarm5Text OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Information on the text field." ::= { itmex2gapfillerOutput 1038 } itmex2gapfillerOutputHpaAlarm6Text OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Information on the text field." ::= { itmex2gapfillerOutput 1040 } itmex2gapfillerOutputHpaAlarm7Text OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Information on the text field." ::= { itmex2gapfillerOutput 1042 } itmex2gapfillerOutputHpaAlarm8Text OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Information on the text field." ::= { itmex2gapfillerOutput 1044 } itmex2gapfillerOutputHpaAlarm9Text OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Information on the text field." ::= { itmex2gapfillerOutput 1046 } itmex2gapfillerOutputHpaAlarm10Text OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Information on the text field." ::= { itmex2gapfillerOutput 1048 } itmex2gapfillerOutputHpaAlarm11Text OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Information on the text field." ::= { itmex2gapfillerOutput 1050 } itmex2gapfillerOutputHpaAlarm12Text OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Information on the text field." ::= { itmex2gapfillerOutput 1052 } itmex2gapfillerOutputHpaAlarm1Status OBJECT-TYPE SYNTAX INTEGER { ok(0), alarm(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "HPA Alarm Status OK-0 ALARM-1" ::= { itmex2gapfillerOutput 1031 } itmex2gapfillerOutputHpaAlarm2Status OBJECT-TYPE SYNTAX INTEGER { ok(0), alarm(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "HPA Alarm Status OK-0 ALARM-1" ::= { itmex2gapfillerOutput 1033 } itmex2gapfillerOutputHpaAlarm3Status OBJECT-TYPE SYNTAX INTEGER { ok(0), alarm(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "HPA Alarm Status OK-0 ALARM-1" ::= { itmex2gapfillerOutput 1035 } itmex2gapfillerOutputHpaAlarm4Status OBJECT-TYPE SYNTAX INTEGER { ok(0), alarm(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "HPA Alarm Status OK-0 ALARM-1" ::= { itmex2gapfillerOutput 1037 } itmex2gapfillerOutputHpaAlarm5Status OBJECT-TYPE SYNTAX INTEGER { ok(0), alarm(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "HPA Alarm Status OK-0 ALARM-1" ::= { itmex2gapfillerOutput 1039 } itmex2gapfillerOutputHpaAlarm6Status OBJECT-TYPE SYNTAX INTEGER { ok(0), alarm(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "HPA Alarm Status OK-0 ALARM-1" ::= { itmex2gapfillerOutput 1041 } itmex2gapfillerOutputHpaAlarm7Status OBJECT-TYPE SYNTAX INTEGER { ok(0), alarm(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "HPA Alarm Status OK-0 ALARM-1" ::= { itmex2gapfillerOutput 1043 } itmex2gapfillerOutputHpaAlarm8Status OBJECT-TYPE SYNTAX INTEGER { ok(0), alarm(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "HPA Alarm Status OK-0 ALARM-1" ::= { itmex2gapfillerOutput 1045 } itmex2gapfillerOutputHpaAlarm9Status OBJECT-TYPE SYNTAX INTEGER { ok(0), alarm(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "HPA Alarm Status OK-0 ALARM-1" ::= { itmex2gapfillerOutput 1047 } itmex2gapfillerOutputHpaAlarm10Status OBJECT-TYPE SYNTAX INTEGER { ok(0), alarm(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "HPA Alarm Status OK-0 ALARM-1" ::= { itmex2gapfillerOutput 1049 } itmex2gapfillerOutputHpaAlarm11Status OBJECT-TYPE SYNTAX INTEGER { ok(0), alarm(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "HPA Alarm Status OK-0 ALARM-1" ::= { itmex2gapfillerOutput 1051 } itmex2gapfillerOutputHpaAlarm12Status OBJECT-TYPE SYNTAX INTEGER { ok(0), alarm(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "HPA Alarm Status OK-0 ALARM-1" ::= { itmex2gapfillerOutput 1053 } itmex2gapfillerOutputHpaPowerForward OBJECT-TYPE SYNTAX Integer32 UNITS "1 Watt" MAX-ACCESS read-only STATUS current DESCRIPTION "HPA forward power." ::= { itmex2gapfillerOutput 1100 } itmex2gapfillerOutputHpaPowerReflected OBJECT-TYPE SYNTAX Integer32 UNITS "1 Watt" MAX-ACCESS read-only STATUS current DESCRIPTION "HPA reflected power" ::= { itmex2gapfillerOutput 1101 } itmex2gapfillerOutputHpaPowerHeatsinkTemp OBJECT-TYPE SYNTAX Integer32 UNITS "1 C" MAX-ACCESS read-only STATUS current DESCRIPTION "HPA heat sink temperatur in celcius" ::= { itmex2gapfillerOutput 1102 } -- -- itmex2gapfiller GPS sub-tree -- itmex2gapfillerGpsInUse OBJECT-TYPE SYNTAX INTEGER { no(0), yes(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "Defines wheter to use gps. Depends on Options in effect" ::= { itmex2gapfillerGps 20 } itmex2gapfillerGpsMaintenance OBJECT-TYPE SYNTAX INTEGER { no(0), yes(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "GNSS in maintenance mode. i.e. upgrade firmware. !!!DO NOT POWER OFF, when in this mode you may brick the GNSS module!!!" ::= { itmex2gapfillerGps 100 } itmex2gapfillerGpsBias OBJECT-TYPE SYNTAX INTEGER { off(0), on(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Defines the bias to be either on or off for the GPS antenna DC supply (5V or 3V DC). An active GPS antenna requires a power supply i.e. requires this parameter to set to ON." ::= { itmex2gapfillerGps 4 } itmex2gapfillerGpsbiasVoltage OBJECT-TYPE SYNTAX INTEGER { gpsant-5v(0), gpsant-33v(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Defines the gps antenna bias voltage. An active GPS antenna requires a power supply of either 3V or 5V." ::= { itmex2gapfillerGps 15 } itmex2gapfillerGpsCableDelay OBJECT-TYPE SYNTAX Integer32 ( -3000 .. 3000 ) UNITS "0.1 ns" MAX-ACCESS read-write STATUS current DESCRIPTION "Defines the antenna cable compensation delay. If the GPS antenna is situated far away from the receiver itself the signal will be delayed and must be compensated." ::= { itmex2gapfillerGps 12 } itmex2gapfillerGpsHoldoverForever OBJECT-TYPE SYNTAX INTEGER { no(0), yes(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Defines whether the GPS system is allowed to operate infinitely (YES) following loss of GPS locking using the internal GPS chip oscillator or not (NO).In case NO is chosen the GPS holdover time applies." ::= { itmex2gapfillerGps 11 } itmex2gapfillerGpsHoldoverTime OBJECT-TYPE SYNTAX Integer32 ( 0 .. 172800 ) MAX-ACCESS read-write STATUS current DESCRIPTION "Defines the GPS holdover time. This value is ignored if the holdover forever (see below) is set to YES If the GPS locking is lost the system is allowed to continue operating for holdover time seconds using the internal GPS chip oscillator. If - when the holdover time interval expires - the GPS locking it still lost, the GPS operation will be maintained using external timing if present. If external timing is not present the GPS operation will be maintained using the internal motherboard oscillator." ::= { itmex2gapfillerGps 10 } itmex2gapfillerGpsSatelliteSystemGPS OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Controls whether GPS satellites are used to obtain position and timing information." ::= { itmex2gapfillerGps 16 } itmex2gapfillerGpsSatelliteSystemGLONASS OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Controls whether GLONASS satellites are used to obtain position and timing information." ::= { itmex2gapfillerGps 17 } itmex2gapfillerGpsSatelliteSystemGALILEO OBJECT-TYPE SYNTAX INTEGER { disable(0) } MAX-ACCESS read-write STATUS current DESCRIPTION "Controls whether GALILEO satellites are used to obtain position and timing information." ::= { itmex2gapfillerGps 18 } itmex2gapfillerGpsSatelliteSystemCOMPASS OBJECT-TYPE SYNTAX INTEGER { disable(0) } MAX-ACCESS read-write STATUS current DESCRIPTION "Controls whether COMPASS satellites are used to obtain position and timing information." ::= { itmex2gapfillerGps 19 } itmex2gapfillerGpsVersion OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Returns the GPS chip firmware version as a string." ::= { itmex2gapfillerGps 9 } itmex2gapfillerGps1PPSStatus OBJECT-TYPE SYNTAX INTEGER { locked(0), unlocked(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "Returns the current locking state of the GPS system. The value LOCKED indicates that the GPS system is locked to a sufficient number of satellites to perform well. UNLOCKED indicates that it is not. For the GPS system to perform well at least 4 satellites must be visible with a proper signal to noise ratio." ::= { itmex2gapfillerGps 1 } itmex2gapfillerGpsTime OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Returns - as a string - the current date and time derived from the received GPS signal(s). The string format is DD/MM/YYYY HH:MM:SS according to the following: - DD in [1..31] means the day, - MM in [1..12] means the month, - YYYY in [0 .. 9999] means the year, - HH in [0 .. 23] means the hour, - MM in [0 .. 59] means the minute, and - SS in [0 .. 59] means the second. Time is in UTC time zone (i.e. GMT) which in turn means that daylight saving time does not apply." ::= { itmex2gapfillerGps 21 } itmex2gapfillerGpsState OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Returns a string describing the GPS state. For informational purposes." ::= { itmex2gapfillerGps 13 } itmex2gapfillerGpsVisibleSatellitesSnr OBJECT-TYPE SYNTAX Integer32 UNITS "0.1 dBHz" MAX-ACCESS read-only STATUS current DESCRIPTION "Returns the average signal to noise ratio of all visible satellites via the built-in GPS receiver" ::= { itmex2gapfillerGps 14 } itmex2gapfillerGpsTrackedSatellitesSnr OBJECT-TYPE SYNTAX Integer32 UNITS "0.1 dBHz" MAX-ACCESS read-only STATUS current DESCRIPTION "Returns the average signal to noise ratio of all tracked satellites via the built-in GPS receiver" ::= { itmex2gapfillerGps 22 } itmex2gapfillerGpsVisibleSatellites OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Returns the number of currently visible satellites via the built-in GPS receiver. A satellite is visible if at all detectable by the GPS system i.e. regardless of signal to noise ratio. Note that the upper value N can change with the launch of new satellites. For some time, however, the GPS system has had a total of 24 satellites." ::= { itmex2gapfillerGps 2 } itmex2gapfillerGpsTrackedSatellites OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Returns the number of currently tracked satellites via the GPS receiver." ::= { itmex2gapfillerGps 3 } itmex2gapfillerGpsLongtitude OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Returns - as a string - the current longtitude derived from the received GPS signal(s). The string format is DDD MM SS C. according to the following: - DD denotes degrees in the intervals [0 .. 180]. MM and SS denote minutes/seconds in the interval [0 .. 59]. C denotes E, W (East, West)." ::= { itmex2gapfillerGps 6 } itmex2gapfillerGpsLatitude OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Returns - as a string - the current latitude derived from the received GPS signal(s). The string format is DD MM SS C. according to the following: - DD denotes degrees in the intervals [0 .. 90]. MM and SS denote minutes/seconds in the interval [0 .. 59]. C denotes N, S (North, South)." ::= { itmex2gapfillerGps 7 } itmex2gapfillerGpsAltitude OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Returns - as a string - the current altitude derived from the received GPS signal(s). The string format is HHHH.c;. according to the following: HHHH.c denotes the altitude in metres with one digit after the comma. The altitude can be negative." ::= { itmex2gapfillerGps 8 } -- -- itmex2gapfiller ChannelFilters sub-tree -- itmex2gapfillerChannelFiltersSelect OBJECT-TYPE SYNTAX INTEGER { filter1(0), filter2(1), filter3(2), filter4(3), custom(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "Controls the current channel filter to use on incoming RF signal." ::= { itmex2gapfillerChannelFilters 1 } -- -- itmex2gapfiller Monitor sub-tree -- -- -- itmex2gapfiller Test sub-tree -- itmex2gapfillerTestEnable OBJECT-TYPE SYNTAX INTEGER { off(0), scar(1), sweep2(2), prbs-on(3), prbs-auto(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "controls the test signal generation. This cannot be used when network mode is SFN. Only a subset is available in repeater mode. test signal output state: - testSignalsArray[testSignals_OFF] Normal operation. No test signal. - testSignalsArray[testSignals_SCAR] A single carrier output is provided. - testSignalsArray[testSignals_SWEEP2] A test signal with full spectrum bandwidth and a 3dB peak to average power ratio. (OFDM PPR-3). - testSignalsArray[testSignals_PRBSON] Forced transmission of stuffing data only (null packets) irrespective of the status of the MPEG-2 transport stream input. - testSignalsArray[testSignals_PRBSAUTO] Automatic transmission of spectrum based on stuffing data when no MPEG-2 TS input is available." ::= { itmex2gapfillerTest 1 } itmex2gapfillerTestEnableReconnect OBJECT-TYPE SYNTAX INTEGER { off(0), on(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Controls whether the test signal shall reconnect after reset. This value is saved in non-volatile memory and thus survives a reboot. - onOffArray[TEXT_INDEX_OFF] The selected test signal will be set to OFF after reset. - onOffArray[TEXT_INDEX_ON] The selected test signal will be output after reset." ::= { itmex2gapfillerTest 2 } itmex2gapfillerTestscarrierFrequencyOffset OBJECT-TYPE SYNTAX Integer32 ( -4000000 .. 4000000 ) UNITS "1 Hz" MAX-ACCESS read-write STATUS current DESCRIPTION "Control frequency offset of the single carrier test signal." ::= { itmex2gapfillerTest 4 } -- -- itmex2gapfiller Alarm sub-tree -- -- Group Alarm table -- itmex2gapfillerGroupAlarmTable OBJECT-TYPE SYNTAX SEQUENCE OF Itmex2gapfillerGroupAlarmEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains the group alarms" ::= { itmex2gapfillerAlarm 1 } itmex2gapfillerGroupAlarmEntry OBJECT-TYPE SYNTAX Itmex2gapfillerGroupAlarmEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry for the alarms" INDEX { itmex2gapfillerGroupAlarmID } ::= { itmex2gapfillerGroupAlarmTable 1 } Itmex2gapfillerGroupAlarmEntry ::= SEQUENCE { itmex2gapfillerGroupAlarmID Integer32, itmex2gapfillerGroupAlarmDescription DisplayString, itmex2gapfillerGroupAlarmState INTEGER, itmex2gapfillerGroupAlarmActionEventlog INTEGER, itmex2gapfillerGroupAlarmActionRelay1 INTEGER, itmex2gapfillerGroupAlarmActionRelay2 INTEGER, itmex2gapfillerGroupAlarmActionTrap INTEGER, itmex2gapfillerGroupAlarmActionEmail INTEGER, itmex2gapfillerGroupAlarmActionAlarmLED INTEGER, itmex2gapfillerGroupAlarmActionForceMode INTEGER } itmex2gapfillerGroupAlarmID OBJECT-TYPE SYNTAX Integer32 ( 0 .. 255 ) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Unique ID for this alarm" ::= { itmex2gapfillerGroupAlarmEntry 1 } itmex2gapfillerGroupAlarmDescription OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Description for this alarm" ::= { itmex2gapfillerGroupAlarmEntry 2 } itmex2gapfillerGroupAlarmState OBJECT-TYPE SYNTAX INTEGER { off(0), activated(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "Current GroupAlarm state condition" ::= { itmex2gapfillerGroupAlarmEntry 3 } itmex2gapfillerGroupAlarmActionEventlog OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Will the current alarm generate an event in the eventlog" ::= { itmex2gapfillerGroupAlarmEntry 4 } itmex2gapfillerGroupAlarmActionRelay1 OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Will the current alarm activate relay1" ::= { itmex2gapfillerGroupAlarmEntry 5 } itmex2gapfillerGroupAlarmActionRelay2 OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Will the current alarm activate relay2" ::= { itmex2gapfillerGroupAlarmEntry 6 } itmex2gapfillerGroupAlarmActionTrap OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Will the current alarm generate a trap" ::= { itmex2gapfillerGroupAlarmEntry 7 } itmex2gapfillerGroupAlarmActionEmail OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Will the current alarm generate an email" ::= { itmex2gapfillerGroupAlarmEntry 8 } itmex2gapfillerGroupAlarmActionAlarmLED OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Will the current alarm turn Alarm LED on frontpanel on" ::= { itmex2gapfillerGroupAlarmEntry 9 } itmex2gapfillerGroupAlarmActionForceMode OBJECT-TYPE SYNTAX INTEGER { none(0), mute(1), reboot(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Will the current alarm mute output" ::= { itmex2gapfillerGroupAlarmEntry 10 } -- Primary Alarm table -- itmex2gapfillerPrimaryAlarmTable OBJECT-TYPE SYNTAX SEQUENCE OF Itmex2gapfillerPrimaryAlarmEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains the Primary alarms" ::= { itmex2gapfillerAlarm 5 } itmex2gapfillerPrimaryAlarmEntry OBJECT-TYPE SYNTAX Itmex2gapfillerPrimaryAlarmEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry for the alarms" INDEX { itmex2gapfillerPrimaryAlarmID } ::= { itmex2gapfillerPrimaryAlarmTable 1 } Itmex2gapfillerPrimaryAlarmEntry ::= SEQUENCE { itmex2gapfillerPrimaryAlarmID Integer32, itmex2gapfillerPrimaryAlarmDescription DisplayString, itmex2gapfillerPrimaryAlarmState INTEGER, itmex2gapfillerPrimaryAlarmActionEventlog INTEGER, itmex2gapfillerPrimaryAlarmActionRelay1 INTEGER, itmex2gapfillerPrimaryAlarmActionRelay2 INTEGER, itmex2gapfillerPrimaryAlarmActionTrap INTEGER, itmex2gapfillerPrimaryAlarmActionEmail INTEGER, itmex2gapfillerPrimaryAlarmActionAlarmLED INTEGER, itmex2gapfillerPrimaryAlarmActionForceMode INTEGER } itmex2gapfillerPrimaryAlarmID OBJECT-TYPE SYNTAX Integer32 ( 0 .. 255 ) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Unique ID for this alarm" ::= { itmex2gapfillerPrimaryAlarmEntry 1 } itmex2gapfillerPrimaryAlarmDescription OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Description for this alarm" ::= { itmex2gapfillerPrimaryAlarmEntry 2 } itmex2gapfillerPrimaryAlarmState OBJECT-TYPE SYNTAX INTEGER { off(0), activated(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "Current PrimaryAlarm state condition" ::= { itmex2gapfillerPrimaryAlarmEntry 3 } itmex2gapfillerPrimaryAlarmActionEventlog OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Will the current alarm generate an event in the eventlog" ::= { itmex2gapfillerPrimaryAlarmEntry 4 } itmex2gapfillerPrimaryAlarmActionRelay1 OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Will the current alarm activate relay1" ::= { itmex2gapfillerPrimaryAlarmEntry 5 } itmex2gapfillerPrimaryAlarmActionRelay2 OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Will the current alarm activate relay2" ::= { itmex2gapfillerPrimaryAlarmEntry 6 } itmex2gapfillerPrimaryAlarmActionTrap OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Will the current alarm generate a trap" ::= { itmex2gapfillerPrimaryAlarmEntry 7 } itmex2gapfillerPrimaryAlarmActionEmail OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Will the current alarm generate an email" ::= { itmex2gapfillerPrimaryAlarmEntry 8 } itmex2gapfillerPrimaryAlarmActionAlarmLED OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Will the current alarm turn Alarm LED on frontpanel on" ::= { itmex2gapfillerPrimaryAlarmEntry 9 } itmex2gapfillerPrimaryAlarmActionForceMode OBJECT-TYPE SYNTAX INTEGER { none(0), mute(1), reboot(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Will the current alarm mute output" ::= { itmex2gapfillerPrimaryAlarmEntry 10 } -- Secondary Alarm table -- itmex2gapfillerSecondaryAlarmTable OBJECT-TYPE SYNTAX SEQUENCE OF Itmex2gapfillerSecondaryAlarmEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains the Input Signal alarms" ::= { itmex2gapfillerAlarm 6 } itmex2gapfillerSecondaryAlarmEntry OBJECT-TYPE SYNTAX Itmex2gapfillerSecondaryAlarmEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry for the alarms" INDEX { itmex2gapfillerSecondaryAlarmID } ::= { itmex2gapfillerSecondaryAlarmTable 1 } Itmex2gapfillerSecondaryAlarmEntry ::= SEQUENCE { itmex2gapfillerSecondaryAlarmID Integer32, itmex2gapfillerSecondaryAlarmDescription DisplayString, itmex2gapfillerSecondaryAlarmState INTEGER, itmex2gapfillerSecondaryAlarmActionEventlog INTEGER, itmex2gapfillerSecondaryAlarmActionRelay1 INTEGER, itmex2gapfillerSecondaryAlarmActionRelay2 INTEGER, itmex2gapfillerSecondaryAlarmActionTrap INTEGER, itmex2gapfillerSecondaryAlarmActionEmail INTEGER, itmex2gapfillerSecondaryAlarmActionAlarmLED INTEGER, itmex2gapfillerSecondaryAlarmActionForceMode INTEGER } itmex2gapfillerSecondaryAlarmID OBJECT-TYPE SYNTAX Integer32 ( 0 .. 255 ) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Unique ID for this alarm" ::= { itmex2gapfillerSecondaryAlarmEntry 1 } itmex2gapfillerSecondaryAlarmDescription OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Description for this alarm" ::= { itmex2gapfillerSecondaryAlarmEntry 2 } itmex2gapfillerSecondaryAlarmState OBJECT-TYPE SYNTAX INTEGER { off(0), activated(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "Current SecondaryAlarm state condition" ::= { itmex2gapfillerSecondaryAlarmEntry 3 } itmex2gapfillerSecondaryAlarmActionEventlog OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Will the current alarm generate an event in the eventlog" ::= { itmex2gapfillerSecondaryAlarmEntry 4 } itmex2gapfillerSecondaryAlarmActionRelay1 OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Will the current alarm activate relay1" ::= { itmex2gapfillerSecondaryAlarmEntry 5 } itmex2gapfillerSecondaryAlarmActionRelay2 OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Will the current alarm activate relay2" ::= { itmex2gapfillerSecondaryAlarmEntry 6 } itmex2gapfillerSecondaryAlarmActionTrap OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Will the current alarm generate a trap" ::= { itmex2gapfillerSecondaryAlarmEntry 7 } itmex2gapfillerSecondaryAlarmActionEmail OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Will the current alarm generate an email" ::= { itmex2gapfillerSecondaryAlarmEntry 8 } itmex2gapfillerSecondaryAlarmActionAlarmLED OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Will the current alarm turn Alarm LED on frontpanel on" ::= { itmex2gapfillerSecondaryAlarmEntry 9 } itmex2gapfillerSecondaryAlarmActionForceMode OBJECT-TYPE SYNTAX INTEGER { none(0), mute(1), reboot(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Will the current alarm mute output" ::= { itmex2gapfillerSecondaryAlarmEntry 10 } -- SFN Alarm table -- itmex2gapfillerSFNAlarmTable OBJECT-TYPE SYNTAX SEQUENCE OF Itmex2gapfillerSFNAlarmEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains the SFN alarms" ::= { itmex2gapfillerAlarm 7 } itmex2gapfillerSFNAlarmEntry OBJECT-TYPE SYNTAX Itmex2gapfillerSFNAlarmEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry for the alarms" INDEX { itmex2gapfillerSFNAlarmID } ::= { itmex2gapfillerSFNAlarmTable 1 } Itmex2gapfillerSFNAlarmEntry ::= SEQUENCE { itmex2gapfillerSFNAlarmID Integer32, itmex2gapfillerSFNAlarmDescription DisplayString, itmex2gapfillerSFNAlarmState INTEGER, itmex2gapfillerSFNAlarmActionEventlog INTEGER, itmex2gapfillerSFNAlarmActionRelay1 INTEGER, itmex2gapfillerSFNAlarmActionRelay2 INTEGER, itmex2gapfillerSFNAlarmActionTrap INTEGER, itmex2gapfillerSFNAlarmActionEmail INTEGER, itmex2gapfillerSFNAlarmActionAlarmLED INTEGER, itmex2gapfillerSFNAlarmActionForceMode INTEGER } itmex2gapfillerSFNAlarmID OBJECT-TYPE SYNTAX Integer32 ( 0 .. 255 ) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Unique ID for this alarm" ::= { itmex2gapfillerSFNAlarmEntry 1 } itmex2gapfillerSFNAlarmDescription OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Description for this alarm" ::= { itmex2gapfillerSFNAlarmEntry 2 } itmex2gapfillerSFNAlarmState OBJECT-TYPE SYNTAX INTEGER { off(0), activated(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "Current SFNAlarm state condition" ::= { itmex2gapfillerSFNAlarmEntry 3 } itmex2gapfillerSFNAlarmActionEventlog OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Will the current alarm generate an event in the eventlog" ::= { itmex2gapfillerSFNAlarmEntry 4 } itmex2gapfillerSFNAlarmActionRelay1 OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Will the current alarm activate relay1" ::= { itmex2gapfillerSFNAlarmEntry 5 } itmex2gapfillerSFNAlarmActionRelay2 OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Will the current alarm activate relay2" ::= { itmex2gapfillerSFNAlarmEntry 6 } itmex2gapfillerSFNAlarmActionTrap OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Will the current alarm generate a trap" ::= { itmex2gapfillerSFNAlarmEntry 7 } itmex2gapfillerSFNAlarmActionEmail OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Will the current alarm generate an email" ::= { itmex2gapfillerSFNAlarmEntry 8 } itmex2gapfillerSFNAlarmActionAlarmLED OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Will the current alarm turn Alarm LED on frontpanel on" ::= { itmex2gapfillerSFNAlarmEntry 9 } itmex2gapfillerSFNAlarmActionForceMode OBJECT-TYPE SYNTAX INTEGER { none(0), mute(1), reboot(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Will the current alarm mute output" ::= { itmex2gapfillerSFNAlarmEntry 10 } -- Reference Alarm table -- itmex2gapfillerReferenceAlarmTable OBJECT-TYPE SYNTAX SEQUENCE OF Itmex2gapfillerReferenceAlarmEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains the Reference alarms" ::= { itmex2gapfillerAlarm 8 } itmex2gapfillerReferenceAlarmEntry OBJECT-TYPE SYNTAX Itmex2gapfillerReferenceAlarmEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry for the alarms" INDEX { itmex2gapfillerReferenceAlarmID } ::= { itmex2gapfillerReferenceAlarmTable 1 } Itmex2gapfillerReferenceAlarmEntry ::= SEQUENCE { itmex2gapfillerReferenceAlarmID Integer32, itmex2gapfillerReferenceAlarmDescription DisplayString, itmex2gapfillerReferenceAlarmState INTEGER, itmex2gapfillerReferenceAlarmActionEventlog INTEGER, itmex2gapfillerReferenceAlarmActionRelay1 INTEGER, itmex2gapfillerReferenceAlarmActionRelay2 INTEGER, itmex2gapfillerReferenceAlarmActionTrap INTEGER, itmex2gapfillerReferenceAlarmActionEmail INTEGER, itmex2gapfillerReferenceAlarmActionAlarmLED INTEGER, itmex2gapfillerReferenceAlarmActionForceMode INTEGER } itmex2gapfillerReferenceAlarmID OBJECT-TYPE SYNTAX Integer32 ( 0 .. 255 ) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Unique ID for this alarm" ::= { itmex2gapfillerReferenceAlarmEntry 1 } itmex2gapfillerReferenceAlarmDescription OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Description for this alarm" ::= { itmex2gapfillerReferenceAlarmEntry 2 } itmex2gapfillerReferenceAlarmState OBJECT-TYPE SYNTAX INTEGER { off(0), activated(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "Current ReferenceAlarm state condition" ::= { itmex2gapfillerReferenceAlarmEntry 3 } itmex2gapfillerReferenceAlarmActionEventlog OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Will the current alarm generate an event in the eventlog" ::= { itmex2gapfillerReferenceAlarmEntry 4 } itmex2gapfillerReferenceAlarmActionRelay1 OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Will the current alarm activate relay1" ::= { itmex2gapfillerReferenceAlarmEntry 5 } itmex2gapfillerReferenceAlarmActionRelay2 OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Will the current alarm activate relay2" ::= { itmex2gapfillerReferenceAlarmEntry 6 } itmex2gapfillerReferenceAlarmActionTrap OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Will the current alarm generate a trap" ::= { itmex2gapfillerReferenceAlarmEntry 7 } itmex2gapfillerReferenceAlarmActionEmail OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Will the current alarm generate an email" ::= { itmex2gapfillerReferenceAlarmEntry 8 } itmex2gapfillerReferenceAlarmActionAlarmLED OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Will the current alarm turn Alarm LED on frontpanel on" ::= { itmex2gapfillerReferenceAlarmEntry 9 } itmex2gapfillerReferenceAlarmActionForceMode OBJECT-TYPE SYNTAX INTEGER { none(0), mute(1), reboot(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Will the current alarm mute output" ::= { itmex2gapfillerReferenceAlarmEntry 10 } -- RF Alarm table -- itmex2gapfillerRFAlarmTable OBJECT-TYPE SYNTAX SEQUENCE OF Itmex2gapfillerRFAlarmEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains the RF alarms" ::= { itmex2gapfillerAlarm 9 } itmex2gapfillerRFAlarmEntry OBJECT-TYPE SYNTAX Itmex2gapfillerRFAlarmEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry for the alarms" INDEX { itmex2gapfillerRFAlarmID } ::= { itmex2gapfillerRFAlarmTable 1 } Itmex2gapfillerRFAlarmEntry ::= SEQUENCE { itmex2gapfillerRFAlarmID Integer32, itmex2gapfillerRFAlarmDescription DisplayString, itmex2gapfillerRFAlarmState INTEGER, itmex2gapfillerRFAlarmActionEventlog INTEGER, itmex2gapfillerRFAlarmActionRelay1 INTEGER, itmex2gapfillerRFAlarmActionRelay2 INTEGER, itmex2gapfillerRFAlarmActionTrap INTEGER, itmex2gapfillerRFAlarmActionEmail INTEGER, itmex2gapfillerRFAlarmActionAlarmLED INTEGER, itmex2gapfillerRFAlarmActionForceMode INTEGER } itmex2gapfillerRFAlarmID OBJECT-TYPE SYNTAX Integer32 ( 0 .. 255 ) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Unique ID for this alarm" ::= { itmex2gapfillerRFAlarmEntry 1 } itmex2gapfillerRFAlarmDescription OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Description for this alarm" ::= { itmex2gapfillerRFAlarmEntry 2 } itmex2gapfillerRFAlarmState OBJECT-TYPE SYNTAX INTEGER { off(0), activated(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "Current RFAlarm state condition" ::= { itmex2gapfillerRFAlarmEntry 3 } itmex2gapfillerRFAlarmActionEventlog OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Will the current alarm generate an event in the eventlog" ::= { itmex2gapfillerRFAlarmEntry 4 } itmex2gapfillerRFAlarmActionRelay1 OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Will the current alarm activate relay1" ::= { itmex2gapfillerRFAlarmEntry 5 } itmex2gapfillerRFAlarmActionRelay2 OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Will the current alarm activate relay2" ::= { itmex2gapfillerRFAlarmEntry 6 } itmex2gapfillerRFAlarmActionTrap OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Will the current alarm generate a trap" ::= { itmex2gapfillerRFAlarmEntry 7 } itmex2gapfillerRFAlarmActionEmail OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Will the current alarm generate an email" ::= { itmex2gapfillerRFAlarmEntry 8 } itmex2gapfillerRFAlarmActionAlarmLED OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Will the current alarm turn Alarm LED on frontpanel on" ::= { itmex2gapfillerRFAlarmEntry 9 } itmex2gapfillerRFAlarmActionForceMode OBJECT-TYPE SYNTAX INTEGER { none(0), mute(1), reboot(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Will the current alarm mute output" ::= { itmex2gapfillerRFAlarmEntry 10 } -- GPS Alarm table -- itmex2gapfillerGPSAlarmTable OBJECT-TYPE SYNTAX SEQUENCE OF Itmex2gapfillerGPSAlarmEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains the GPS alarms" ::= { itmex2gapfillerAlarm 10 } itmex2gapfillerGPSAlarmEntry OBJECT-TYPE SYNTAX Itmex2gapfillerGPSAlarmEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry for the alarms" INDEX { itmex2gapfillerGPSAlarmID } ::= { itmex2gapfillerGPSAlarmTable 1 } Itmex2gapfillerGPSAlarmEntry ::= SEQUENCE { itmex2gapfillerGPSAlarmID Integer32, itmex2gapfillerGPSAlarmDescription DisplayString, itmex2gapfillerGPSAlarmState INTEGER, itmex2gapfillerGPSAlarmActionEventlog INTEGER, itmex2gapfillerGPSAlarmActionRelay1 INTEGER, itmex2gapfillerGPSAlarmActionRelay2 INTEGER, itmex2gapfillerGPSAlarmActionTrap INTEGER, itmex2gapfillerGPSAlarmActionEmail INTEGER, itmex2gapfillerGPSAlarmActionAlarmLED INTEGER, itmex2gapfillerGPSAlarmActionForceMode INTEGER } itmex2gapfillerGPSAlarmID OBJECT-TYPE SYNTAX Integer32 ( 0 .. 255 ) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Unique ID for this alarm" ::= { itmex2gapfillerGPSAlarmEntry 1 } itmex2gapfillerGPSAlarmDescription OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Description for this alarm" ::= { itmex2gapfillerGPSAlarmEntry 2 } itmex2gapfillerGPSAlarmState OBJECT-TYPE SYNTAX INTEGER { off(0), activated(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "Current GPSAlarm state condition" ::= { itmex2gapfillerGPSAlarmEntry 3 } itmex2gapfillerGPSAlarmActionEventlog OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Will the current alarm generate an event in the eventlog" ::= { itmex2gapfillerGPSAlarmEntry 4 } itmex2gapfillerGPSAlarmActionRelay1 OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Will the current alarm activate relay1" ::= { itmex2gapfillerGPSAlarmEntry 5 } itmex2gapfillerGPSAlarmActionRelay2 OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Will the current alarm activate relay2" ::= { itmex2gapfillerGPSAlarmEntry 6 } itmex2gapfillerGPSAlarmActionTrap OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Will the current alarm generate a trap" ::= { itmex2gapfillerGPSAlarmEntry 7 } itmex2gapfillerGPSAlarmActionEmail OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Will the current alarm generate an email" ::= { itmex2gapfillerGPSAlarmEntry 8 } itmex2gapfillerGPSAlarmActionAlarmLED OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Will the current alarm turn Alarm LED on frontpanel on" ::= { itmex2gapfillerGPSAlarmEntry 9 } itmex2gapfillerGPSAlarmActionForceMode OBJECT-TYPE SYNTAX INTEGER { none(0), mute(1), reboot(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Will the current alarm mute output" ::= { itmex2gapfillerGPSAlarmEntry 10 } -- External Alarm table -- itmex2gapfillerExternalAlarmTable OBJECT-TYPE SYNTAX SEQUENCE OF Itmex2gapfillerExternalAlarmEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains the External alarms" ::= { itmex2gapfillerAlarm 13 } itmex2gapfillerExternalAlarmEntry OBJECT-TYPE SYNTAX Itmex2gapfillerExternalAlarmEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry for the alarms" INDEX { itmex2gapfillerExternalAlarmID } ::= { itmex2gapfillerExternalAlarmTable 1 } Itmex2gapfillerExternalAlarmEntry ::= SEQUENCE { itmex2gapfillerExternalAlarmID Integer32, itmex2gapfillerExternalAlarmDescription DisplayString, itmex2gapfillerExternalAlarmState INTEGER, itmex2gapfillerExternalAlarmActionEventlog INTEGER, itmex2gapfillerExternalAlarmActionRelay1 INTEGER, itmex2gapfillerExternalAlarmActionRelay2 INTEGER, itmex2gapfillerExternalAlarmActionTrap INTEGER, itmex2gapfillerExternalAlarmActionEmail INTEGER, itmex2gapfillerExternalAlarmActionAlarmLED INTEGER, itmex2gapfillerExternalAlarmActionForceMode INTEGER } itmex2gapfillerExternalAlarmID OBJECT-TYPE SYNTAX Integer32 ( 0 .. 255 ) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Unique ID for this alarm" ::= { itmex2gapfillerExternalAlarmEntry 1 } itmex2gapfillerExternalAlarmDescription OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Description for this alarm" ::= { itmex2gapfillerExternalAlarmEntry 2 } itmex2gapfillerExternalAlarmState OBJECT-TYPE SYNTAX INTEGER { off(0), activated(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "Current ExternalAlarm state condition" ::= { itmex2gapfillerExternalAlarmEntry 3 } itmex2gapfillerExternalAlarmActionEventlog OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Will the current alarm generate an event in the eventlog" ::= { itmex2gapfillerExternalAlarmEntry 4 } itmex2gapfillerExternalAlarmActionRelay1 OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Will the current alarm activate relay1" ::= { itmex2gapfillerExternalAlarmEntry 5 } itmex2gapfillerExternalAlarmActionRelay2 OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Will the current alarm activate relay2" ::= { itmex2gapfillerExternalAlarmEntry 6 } itmex2gapfillerExternalAlarmActionTrap OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Will the current alarm generate a trap" ::= { itmex2gapfillerExternalAlarmEntry 7 } itmex2gapfillerExternalAlarmActionEmail OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Will the current alarm generate an email" ::= { itmex2gapfillerExternalAlarmEntry 8 } itmex2gapfillerExternalAlarmActionAlarmLED OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Will the current alarm turn Alarm LED on frontpanel on" ::= { itmex2gapfillerExternalAlarmEntry 9 } itmex2gapfillerExternalAlarmActionForceMode OBJECT-TYPE SYNTAX INTEGER { none(0), mute(1), reboot(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Will the current alarm mute output" ::= { itmex2gapfillerExternalAlarmEntry 10 } -- HW Monitor Alarm table -- itmex2gapfillerHWMonitorAlarmTable OBJECT-TYPE SYNTAX SEQUENCE OF Itmex2gapfillerHWMonitorAlarmEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains the HW Monitor alarms" ::= { itmex2gapfillerAlarm 14 } itmex2gapfillerHWMonitorAlarmEntry OBJECT-TYPE SYNTAX Itmex2gapfillerHWMonitorAlarmEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry for the alarms" INDEX { itmex2gapfillerHWMonitorAlarmID } ::= { itmex2gapfillerHWMonitorAlarmTable 1 } Itmex2gapfillerHWMonitorAlarmEntry ::= SEQUENCE { itmex2gapfillerHWMonitorAlarmID Integer32, itmex2gapfillerHWMonitorAlarmDescription DisplayString, itmex2gapfillerHWMonitorAlarmState INTEGER, itmex2gapfillerHWMonitorAlarmActionEventlog INTEGER, itmex2gapfillerHWMonitorAlarmActionRelay1 INTEGER, itmex2gapfillerHWMonitorAlarmActionRelay2 INTEGER, itmex2gapfillerHWMonitorAlarmActionTrap INTEGER, itmex2gapfillerHWMonitorAlarmActionEmail INTEGER, itmex2gapfillerHWMonitorAlarmActionAlarmLED INTEGER, itmex2gapfillerHWMonitorAlarmActionForceMode INTEGER } itmex2gapfillerHWMonitorAlarmID OBJECT-TYPE SYNTAX Integer32 ( 0 .. 255 ) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Unique ID for this alarm" ::= { itmex2gapfillerHWMonitorAlarmEntry 1 } itmex2gapfillerHWMonitorAlarmDescription OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Description for this alarm" ::= { itmex2gapfillerHWMonitorAlarmEntry 2 } itmex2gapfillerHWMonitorAlarmState OBJECT-TYPE SYNTAX INTEGER { off(0), activated(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "Current HWMonitorAlarm state condition" ::= { itmex2gapfillerHWMonitorAlarmEntry 3 } itmex2gapfillerHWMonitorAlarmActionEventlog OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Will the current alarm generate an event in the eventlog" ::= { itmex2gapfillerHWMonitorAlarmEntry 4 } itmex2gapfillerHWMonitorAlarmActionRelay1 OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Will the current alarm activate relay1" ::= { itmex2gapfillerHWMonitorAlarmEntry 5 } itmex2gapfillerHWMonitorAlarmActionRelay2 OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Will the current alarm activate relay2" ::= { itmex2gapfillerHWMonitorAlarmEntry 6 } itmex2gapfillerHWMonitorAlarmActionTrap OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Will the current alarm generate a trap" ::= { itmex2gapfillerHWMonitorAlarmEntry 7 } itmex2gapfillerHWMonitorAlarmActionEmail OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Will the current alarm generate an email" ::= { itmex2gapfillerHWMonitorAlarmEntry 8 } itmex2gapfillerHWMonitorAlarmActionAlarmLED OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Will the current alarm turn Alarm LED on frontpanel on" ::= { itmex2gapfillerHWMonitorAlarmEntry 9 } itmex2gapfillerHWMonitorAlarmActionForceMode OBJECT-TYPE SYNTAX INTEGER { none(0), mute(1), reboot(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Will the current alarm mute output" ::= { itmex2gapfillerHWMonitorAlarmEntry 10 } -- Communications Alarm table -- itmex2gapfillerCommsAlarmTable OBJECT-TYPE SYNTAX SEQUENCE OF Itmex2gapfillerCommsAlarmEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains the Communication alarms" ::= { itmex2gapfillerAlarm 15 } itmex2gapfillerCommsAlarmEntry OBJECT-TYPE SYNTAX Itmex2gapfillerCommsAlarmEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry for the alarms" INDEX { itmex2gapfillerCommsAlarmID } ::= { itmex2gapfillerCommsAlarmTable 1 } Itmex2gapfillerCommsAlarmEntry ::= SEQUENCE { itmex2gapfillerCommsAlarmID Integer32, itmex2gapfillerCommsAlarmDescription DisplayString, itmex2gapfillerCommsAlarmState INTEGER, itmex2gapfillerCommsAlarmActionEventlog INTEGER, itmex2gapfillerCommsAlarmActionRelay1 INTEGER, itmex2gapfillerCommsAlarmActionRelay2 INTEGER, itmex2gapfillerCommsAlarmActionTrap INTEGER, itmex2gapfillerCommsAlarmActionEmail INTEGER, itmex2gapfillerCommsAlarmActionAlarmLED INTEGER, itmex2gapfillerCommsAlarmActionForceMode INTEGER } itmex2gapfillerCommsAlarmID OBJECT-TYPE SYNTAX Integer32 ( 0 .. 255 ) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Unique ID for this alarm" ::= { itmex2gapfillerCommsAlarmEntry 1 } itmex2gapfillerCommsAlarmDescription OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Description for this alarm" ::= { itmex2gapfillerCommsAlarmEntry 2 } itmex2gapfillerCommsAlarmState OBJECT-TYPE SYNTAX INTEGER { off(0), activated(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "Current CommsAlarm state condition" ::= { itmex2gapfillerCommsAlarmEntry 3 } itmex2gapfillerCommsAlarmActionEventlog OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Will the current alarm generate an event in the eventlog" ::= { itmex2gapfillerCommsAlarmEntry 4 } itmex2gapfillerCommsAlarmActionRelay1 OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Will the current alarm activate relay1" ::= { itmex2gapfillerCommsAlarmEntry 5 } itmex2gapfillerCommsAlarmActionRelay2 OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Will the current alarm activate relay2" ::= { itmex2gapfillerCommsAlarmEntry 6 } itmex2gapfillerCommsAlarmActionTrap OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Will the current alarm generate a trap" ::= { itmex2gapfillerCommsAlarmEntry 7 } itmex2gapfillerCommsAlarmActionEmail OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Will the current alarm generate an email" ::= { itmex2gapfillerCommsAlarmEntry 8 } itmex2gapfillerCommsAlarmActionAlarmLED OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Will the current alarm turn Alarm LED on frontpanel on" ::= { itmex2gapfillerCommsAlarmEntry 9 } itmex2gapfillerCommsAlarmActionForceMode OBJECT-TYPE SYNTAX INTEGER { none(0), mute(1), reboot(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Will the current alarm mute output" ::= { itmex2gapfillerCommsAlarmEntry 10 } -- Internal Alarm table -- itmex2gapfillerInternalAlarmTable OBJECT-TYPE SYNTAX SEQUENCE OF Itmex2gapfillerInternalAlarmEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains the Internal alarms" ::= { itmex2gapfillerAlarm 18 } itmex2gapfillerInternalAlarmEntry OBJECT-TYPE SYNTAX Itmex2gapfillerInternalAlarmEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry for the alarms" INDEX { itmex2gapfillerInternalAlarmID } ::= { itmex2gapfillerInternalAlarmTable 1 } Itmex2gapfillerInternalAlarmEntry ::= SEQUENCE { itmex2gapfillerInternalAlarmID Integer32, itmex2gapfillerInternalAlarmDescription DisplayString, itmex2gapfillerInternalAlarmState INTEGER, itmex2gapfillerInternalAlarmActionEventlog INTEGER, itmex2gapfillerInternalAlarmActionRelay1 INTEGER, itmex2gapfillerInternalAlarmActionRelay2 INTEGER, itmex2gapfillerInternalAlarmActionTrap INTEGER, itmex2gapfillerInternalAlarmActionEmail INTEGER, itmex2gapfillerInternalAlarmActionAlarmLED INTEGER, itmex2gapfillerInternalAlarmActionForceMode INTEGER } itmex2gapfillerInternalAlarmID OBJECT-TYPE SYNTAX Integer32 ( 0 .. 255 ) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Unique ID for this alarm" ::= { itmex2gapfillerInternalAlarmEntry 1 } itmex2gapfillerInternalAlarmDescription OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Description for this alarm" ::= { itmex2gapfillerInternalAlarmEntry 2 } itmex2gapfillerInternalAlarmState OBJECT-TYPE SYNTAX INTEGER { off(0), activated(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "Current InternalAlarm state condition" ::= { itmex2gapfillerInternalAlarmEntry 3 } itmex2gapfillerInternalAlarmActionEventlog OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Will the current alarm generate an event in the eventlog" ::= { itmex2gapfillerInternalAlarmEntry 4 } itmex2gapfillerInternalAlarmActionRelay1 OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Will the current alarm activate relay1" ::= { itmex2gapfillerInternalAlarmEntry 5 } itmex2gapfillerInternalAlarmActionRelay2 OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Will the current alarm activate relay2" ::= { itmex2gapfillerInternalAlarmEntry 6 } itmex2gapfillerInternalAlarmActionTrap OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Will the current alarm generate a trap" ::= { itmex2gapfillerInternalAlarmEntry 7 } itmex2gapfillerInternalAlarmActionEmail OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Will the current alarm generate an email" ::= { itmex2gapfillerInternalAlarmEntry 8 } itmex2gapfillerInternalAlarmActionAlarmLED OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Will the current alarm turn Alarm LED on frontpanel on" ::= { itmex2gapfillerInternalAlarmEntry 9 } itmex2gapfillerInternalAlarmActionForceMode OBJECT-TYPE SYNTAX INTEGER { none(0), mute(1), reboot(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Will the current alarm mute output" ::= { itmex2gapfillerInternalAlarmEntry 10 } -- DVB-T2 Mode-A Alarm table -- -- -- itmex2gapfiller Preset sub-tree -- itmex2gapfillerPresetTable OBJECT-TYPE SYNTAX SEQUENCE OF Itmex2gapfillerPresetEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains the presets" ::= { itmex2gapfillerPreset 1 } itmex2gapfillerPresetEntry OBJECT-TYPE SYNTAX Itmex2gapfillerPresetEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry for the presets" INDEX { itmex2gapfillerPresetNo } ::= { itmex2gapfillerPresetTable 1 } Itmex2gapfillerPresetEntry ::= SEQUENCE { itmex2gapfillerPresetNo Integer32, itmex2gapfillerPresetName DisplayString } itmex2gapfillerPresetNo OBJECT-TYPE SYNTAX Integer32 ( 1 .. 10 ) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Unique number for this preset" ::= { itmex2gapfillerPresetEntry 1 } itmex2gapfillerPresetName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Name for this preset" ::= { itmex2gapfillerPresetEntry 2 } itmex2gapfillerPresetRecall OBJECT-TYPE SYNTAX Integer32 ( 0 .. 10 ) MAX-ACCESS read-write STATUS current DESCRIPTION "Install this preset into current running parameter set. Value will always read as 0 and setting it to 0 has no effect." ::= { itmex2gapfillerPreset 2 } itmex2gapfillerPresetStore OBJECT-TYPE SYNTAX Integer32 ( 0 .. 8 ) MAX-ACCESS read-write STATUS current DESCRIPTION "Store the currently running parameter set into this preset Value will always read as 0 and setting it to 0 has no effect." ::= { itmex2gapfillerPreset 3 } itmex2gapfillerPresetLastRecalled OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Description of the last recalled preset." ::= { itmex2gapfillerPreset 4 } -- -- itmex2gapfiller Eventlog sub-tree -- itmex2gapfillerEventlogTable OBJECT-TYPE SYNTAX SEQUENCE OF Itmex2gapfillerEventlogEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains the group alarms" ::= { itmex2gapfillerEventlog 1 } itmex2gapfillerEventlogEntry OBJECT-TYPE SYNTAX Itmex2gapfillerEventlogEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry for the alarms" INDEX { itmex2gapfillerEventlogNo } ::= { itmex2gapfillerEventlogTable 1 } Itmex2gapfillerEventlogEntry ::= SEQUENCE { itmex2gapfillerEventlogNo Integer32, itmex2gapfillerEventlogID Integer32, itmex2gapfillerEventlogTimestamp DateAndTime, itmex2gapfillerEventlogText DisplayString } itmex2gapfillerEventlogNo OBJECT-TYPE SYNTAX Integer32 ( 1 .. 2047 ) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Unique number for this event" ::= { itmex2gapfillerEventlogEntry 1 } itmex2gapfillerEventlogID OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Unique ID for this type of event" ::= { itmex2gapfillerEventlogEntry 2 } itmex2gapfillerEventlogTimestamp OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Timestamp for this event" ::= { itmex2gapfillerEventlogEntry 3 } itmex2gapfillerEventlogText OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Text for this event" ::= { itmex2gapfillerEventlogEntry 4 } itmex2gapfillerEventlogClear OBJECT-TYPE SYNTAX INTEGER { noop(0), clear(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Clear the entire eventlog by setting the value to 1." ::= { itmex2gapfillerEventlog 2 } itmex2gapfillerEventlogEnable OBJECT-TYPE SYNTAX INTEGER { off(0), on(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable eventlog by setting the value to 1." ::= { itmex2gapfillerEventlog 3 } itmex2gapfillerEventlogMode OBJECT-TYPE SYNTAX INTEGER { fifo(0), full(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Set eventlog mode to FIFO for keeping the newest entries. Set eventlog mode to FULL for keeping the oldest entries." ::= { itmex2gapfillerEventlog 4 } -- -- itmex2gapfiller Comms sub-tree -- itmex2gapfillerCommsAlarmEmailReceiver OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The email address of the receipiant of alarm emails." ::= { itmex2gapfillerComms 34 } itmex2gapfillerCommsNetworkWarnings OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Warnings about the network configuration." ::= { itmex2gapfillerComms 888 } itmex2gapfillerCommsSeparatedSwitchPorts OBJECT-TYPE SYNTAX INTEGER { off(0), on(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Will the ports on the switch in the backplane forward LAN traffic to each other or will they be separated and only forward traffic to/from the modulator/repeater." ::= { itmex2gapfillerComms 98 } itmex2gapfillerCommsBroadcastStormProtection OBJECT-TYPE SYNTAX INTEGER { off(0), on(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/Disable broadcast (and multicast) storm Protection. This will limit the network ingress rate on physical Ethernet port 0 and 1 to roughly 100mbit/s." ::= { itmex2gapfillerComms 94 } itmex2gapfillerCommsLocalPhysicalInterface OBJECT-TYPE SYNTAX INTEGER { eth0(0), eth1(1), eth2(2), eth3(3), eth4(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "The Physical Ethernet Interface of this (virtual) interface." ::= { itmex2gapfillerComms 80 } itmex2gapfillerCommsLocalDhcpMode OBJECT-TYPE SYNTAX INTEGER { off(0), client(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/Disable DHCP client on this interface." ::= { itmex2gapfillerComms 3 } itmex2gapfillerCommsLocalStaticIpAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The static IP address for this interface. Will be used if DHCP is disabled or unavailable." ::= { itmex2gapfillerComms 1 } itmex2gapfillerCommsLocalStaticNetmask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The static IP netmask for this interface. Will be used if DHCP is disabled or unavailable." ::= { itmex2gapfillerComms 2 } itmex2gapfillerCommsLocalIpMulticastAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The IP Multicast address for this interface." ::= { itmex2gapfillerComms 100 } itmex2gapfillerCommsLocalIpMulticastSourceFilterMode OBJECT-TYPE SYNTAX INTEGER { sfinclude(0), sfexclude(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies whether the Multicast Source Filter IP Address list is: SFINCLUDE: ONLY receive multicast frames from the source addresses in the list. SFEXCLUDE: Receive all multicast frames EXCEPT from the source addresses in the list." ::= { itmex2gapfillerComms 190 } itmex2gapfillerCommsLocalIpMulticastSourceFilterAddress1 OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The IP Multicast Source Filter address no 1 for this interface." ::= { itmex2gapfillerComms 200 } itmex2gapfillerCommsLocalIpMulticastSourceFilterAddress2 OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The IP Multicast Source Filter address no 2 for this interface." ::= { itmex2gapfillerComms 201 } itmex2gapfillerCommsLocalIpMulticastSourceFilterAddress3 OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The IP Multicast Source Filter address no 3 for this interface." ::= { itmex2gapfillerComms 202 } itmex2gapfillerCommsLocalIpMulticastSourceFilterAddress4 OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The IP Multicast Source Filter address no 4 for this interface." ::= { itmex2gapfillerComms 203 } itmex2gapfillerCommsLocalIpMulticastSourceFilterAddress5 OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The IP Multicast Source Filter address no 5 for this interface." ::= { itmex2gapfillerComms 204 } itmex2gapfillerCommsLocalIpMulticastSourceFilterAddress6 OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The IP Multicast Source Filter address no 6 for this interface." ::= { itmex2gapfillerComms 205 } itmex2gapfillerCommsLocalVlanEnable OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/Disable VLAN on this interface." ::= { itmex2gapfillerComms 101 } itmex2gapfillerCommsLocalVlanId OBJECT-TYPE SYNTAX Integer32 ( 1 .. 4095 ) MAX-ACCESS read-write STATUS current DESCRIPTION "VLAN ID to use on this interface, if VLAN is enabled. Please note that VLAN ID 4001 and 4002 are used for internal switching and thus cannot be used on any interface." ::= { itmex2gapfillerComms 102 } itmex2gapfillerCommsLocalServiceSNMP OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/Disable SNMP service on this interface." ::= { itmex2gapfillerComms 103 } itmex2gapfillerCommsLocalServiceSCPI OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/Disable SCPI service on this interface." ::= { itmex2gapfillerComms 104 } itmex2gapfillerCommsLocalServiceTSoIP OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/Disable TSoIP service on this interface." ::= { itmex2gapfillerComms 105 } itmex2gapfillerCommsLocalServiceRIP OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/Disable RIP service on this interface." ::= { itmex2gapfillerComms 106 } itmex2gapfillerCommsLocalCurrentIpAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The current IP address for this interface." ::= { itmex2gapfillerComms 4 } itmex2gapfillerCommsLocalCurrentNetmask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The current IP netmask for this interface." ::= { itmex2gapfillerComms 5 } itmex2gapfillerCommsRemoteEnable OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/Disable this interface." ::= { itmex2gapfillerComms 117 } itmex2gapfillerCommsRemotePhysicalInterface OBJECT-TYPE SYNTAX INTEGER { eth0(0), eth1(1), eth2(2), eth3(3), eth4(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "The Physical Ethernet Interface of this (virtual) interface." ::= { itmex2gapfillerComms 81 } itmex2gapfillerCommsRemoteDhcpMode OBJECT-TYPE SYNTAX INTEGER { off(0), client(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/Disable DHCP client on this interface." ::= { itmex2gapfillerComms 73 } itmex2gapfillerCommsRemoteStaticIpAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The static IP address for this interface. Will be used if DHCP is disabled or unavailable." ::= { itmex2gapfillerComms 7 } itmex2gapfillerCommsRemoteStaticNetmask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The static IP netmask for this interface. Will be used if DHCP is disabled or unavailable." ::= { itmex2gapfillerComms 8 } itmex2gapfillerCommsRemoteIpMulticastAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The IP Multicast address for this interface." ::= { itmex2gapfillerComms 110 } itmex2gapfillerCommsRemoteIpMulticastSourceFilterMode OBJECT-TYPE SYNTAX INTEGER { sfinclude(0), sfexclude(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies whether the Multicast Source Filter IP Address list is: SFINCLUDE: ONLY receive multicast frames from the source addresses in the list. SFEXCLUDE: Receive all multicast frames EXCEPT from the source addresses in the list." ::= { itmex2gapfillerComms 191 } itmex2gapfillerCommsRemoteIpMulticastSourceFilterAddress1 OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The IP Multicast Source Filter address no 1 for this interface." ::= { itmex2gapfillerComms 220 } itmex2gapfillerCommsRemoteIpMulticastSourceFilterAddress2 OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The IP Multicast Source Filter address no 2 for this interface." ::= { itmex2gapfillerComms 221 } itmex2gapfillerCommsRemoteIpMulticastSourceFilterAddress3 OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The IP Multicast Source Filter address no 3 for this interface." ::= { itmex2gapfillerComms 222 } itmex2gapfillerCommsRemoteIpMulticastSourceFilterAddress4 OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The IP Multicast Source Filter address no 4 for this interface." ::= { itmex2gapfillerComms 223 } itmex2gapfillerCommsRemoteIpMulticastSourceFilterAddress5 OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The IP Multicast Source Filter address no 5 for this interface." ::= { itmex2gapfillerComms 224 } itmex2gapfillerCommsRemoteIpMulticastSourceFilterAddress6 OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The IP Multicast Source Filter address no 6 for this interface." ::= { itmex2gapfillerComms 225 } itmex2gapfillerCommsRemoteVlanEnable OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/Disable VLAN on this interface." ::= { itmex2gapfillerComms 111 } itmex2gapfillerCommsRemoteVlanId OBJECT-TYPE SYNTAX Integer32 ( 1 .. 4095 ) MAX-ACCESS read-write STATUS current DESCRIPTION "VLAN ID to use on this interface, if VLAN is enabled. Please note that VLAN ID 4001 and 4002 are used for internal switching and thus cannot be used on any interface." ::= { itmex2gapfillerComms 112 } itmex2gapfillerCommsRemoteServiceSNMP OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/Disable SNMP service on this interface." ::= { itmex2gapfillerComms 113 } itmex2gapfillerCommsRemoteServiceSCPI OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/Disable SCPI service on this interface." ::= { itmex2gapfillerComms 114 } itmex2gapfillerCommsRemoteServiceTSoIP OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/Disable TSoIP service on this interface." ::= { itmex2gapfillerComms 115 } itmex2gapfillerCommsRemoteServiceWeb OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/Disable WEB (http) service on this interface." ::= { itmex2gapfillerComms 116 } itmex2gapfillerCommsRemoteServiceRIP OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/Disable RIP service on this interface." ::= { itmex2gapfillerComms 118 } itmex2gapfillerCommsRemoteCurrentIpAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The current IP address for this interface." ::= { itmex2gapfillerComms 10 } itmex2gapfillerCommsRemoteCurrentNetmask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The current IP netmask for this interface." ::= { itmex2gapfillerComms 11 } itmex2gapfillerCommsGbeAdminEnable OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/Disable this interface." ::= { itmex2gapfillerComms 127 } itmex2gapfillerCommsGbeAdminPhysicalInterface OBJECT-TYPE SYNTAX INTEGER { eth0(0), eth1(1), eth2(2), eth3(3), eth4(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "The Physical Ethernet Interface of this (virtual) interface." ::= { itmex2gapfillerComms 82 } itmex2gapfillerCommsGbeAdminDhcpMode OBJECT-TYPE SYNTAX INTEGER { off(0), client(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/Disable DHCP client on this interface." ::= { itmex2gapfillerComms 74 } itmex2gapfillerCommsGbeAdminStaticIpAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The static IP address for this interface. Will be used if DHCP is disabled or unavailable." ::= { itmex2gapfillerComms 13 } itmex2gapfillerCommsGbeAdminStaticNetmask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The static IP netmask for this interface. Will be used if DHCP is disabled or unavailable." ::= { itmex2gapfillerComms 14 } itmex2gapfillerCommsGbeAdminIpMulticastAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The IP Multicast address for this interface." ::= { itmex2gapfillerComms 120 } itmex2gapfillerCommsGbeAdminIpMulticastSourceFilterMode OBJECT-TYPE SYNTAX INTEGER { sfinclude(0), sfexclude(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies whether the Multicast Source Filter IP Address list is: SFINCLUDE: ONLY receive multicast frames from the source addresses in the list. SFEXCLUDE: Receive all multicast frames EXCEPT from the source addresses in the list." ::= { itmex2gapfillerComms 192 } itmex2gapfillerCommsGbeAdminIpMulticastSourceFilterAddress1 OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The IP Multicast Source Filter address no 1 for this interface." ::= { itmex2gapfillerComms 230 } itmex2gapfillerCommsGbeAdminIpMulticastSourceFilterAddress2 OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The IP Multicast Source Filter address no 2 for this interface." ::= { itmex2gapfillerComms 231 } itmex2gapfillerCommsGbeAdminIpMulticastSourceFilterAddress3 OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The IP Multicast Source Filter address no 3 for this interface." ::= { itmex2gapfillerComms 232 } itmex2gapfillerCommsGbeAdminIpMulticastSourceFilterAddress4 OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The IP Multicast Source Filter address no 4 for this interface." ::= { itmex2gapfillerComms 233 } itmex2gapfillerCommsGbeAdminIpMulticastSourceFilterAddress5 OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The IP Multicast Source Filter address no 5 for this interface." ::= { itmex2gapfillerComms 234 } itmex2gapfillerCommsGbeAdminIpMulticastSourceFilterAddress6 OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The IP Multicast Source Filter address no 6 for this interface." ::= { itmex2gapfillerComms 235 } itmex2gapfillerCommsGbeAdminVlanEnable OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/Disable VLAN on this interface." ::= { itmex2gapfillerComms 121 } itmex2gapfillerCommsGbeAdminVlanId OBJECT-TYPE SYNTAX Integer32 ( 1 .. 4095 ) MAX-ACCESS read-write STATUS current DESCRIPTION "VLAN ID to use on this interface, if VLAN is enabled. Please note that VLAN ID 4001 and 4002 are used for internal switching and thus cannot be used on any interface." ::= { itmex2gapfillerComms 122 } itmex2gapfillerCommsGbeAdminServiceSNMP OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/Disable SNMP service on this interface." ::= { itmex2gapfillerComms 123 } itmex2gapfillerCommsGbeAdminServiceSCPI OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/Disable SCPI service on this interface." ::= { itmex2gapfillerComms 124 } itmex2gapfillerCommsGbeAdminServiceTSoIP OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/Disable TSoIP service on this interface." ::= { itmex2gapfillerComms 125 } itmex2gapfillerCommsGbeAdminServiceWeb OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/Disable Web (http) service on this interface." ::= { itmex2gapfillerComms 126 } itmex2gapfillerCommsGbeAdminServiceRIP OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/Disable RIP service on this interface." ::= { itmex2gapfillerComms 128 } itmex2gapfillerCommsGbeAdminCurrentIpAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The current IP address for this interface." ::= { itmex2gapfillerComms 16 } itmex2gapfillerCommsGbeAdminCurrentNetmask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The current IP netmask for this interface." ::= { itmex2gapfillerComms 17 } itmex2gapfillerCommsBackupEnable OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/Disable this interface." ::= { itmex2gapfillerComms 150 } itmex2gapfillerCommsBackupPhysicalInterface OBJECT-TYPE SYNTAX INTEGER { eth0(0), eth1(1), eth2(2), eth3(3), eth4(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "The Physical Ethernet Interface of this (virtual) interface." ::= { itmex2gapfillerComms 151 } itmex2gapfillerCommsBackupDhcpMode OBJECT-TYPE SYNTAX INTEGER { off(0), client(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/Disable DHCP client on this interface." ::= { itmex2gapfillerComms 75 } itmex2gapfillerCommsBackupStaticIpAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The static IP address for this interface. Will be used if DHCP is disabled or unavailable." ::= { itmex2gapfillerComms 152 } itmex2gapfillerCommsBackupStaticNetmask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The static IP netmask for this interface. Will be used if DHCP is disabled or unavailable." ::= { itmex2gapfillerComms 153 } itmex2gapfillerCommsBackupIpMulticastAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The IP Multicast address for this interface." ::= { itmex2gapfillerComms 154 } itmex2gapfillerCommsBackupIpMulticastSourceFilterMode OBJECT-TYPE SYNTAX INTEGER { sfinclude(0), sfexclude(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies whether the Multicast Source Filter IP Address list is: SFINCLUDE: ONLY receive multicast frames from the source addresses in the list. SFEXCLUDE: Receive all multicast frames EXCEPT from the source addresses in the list." ::= { itmex2gapfillerComms 193 } itmex2gapfillerCommsBackupIpMulticastSourceFilterAddress1 OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The IP Multicast Source Filter address no 1 for this interface." ::= { itmex2gapfillerComms 170 } itmex2gapfillerCommsBackupIpMulticastSourceFilterAddress2 OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The IP Multicast Source Filter address no 2 for this interface." ::= { itmex2gapfillerComms 171 } itmex2gapfillerCommsBackupIpMulticastSourceFilterAddress3 OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The IP Multicast Source Filter address no 3 for this interface." ::= { itmex2gapfillerComms 172 } itmex2gapfillerCommsBackupIpMulticastSourceFilterAddress4 OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The IP Multicast Source Filter address no 4 for this interface." ::= { itmex2gapfillerComms 173 } itmex2gapfillerCommsBackupIpMulticastSourceFilterAddress5 OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The IP Multicast Source Filter address no 5 for this interface." ::= { itmex2gapfillerComms 174 } itmex2gapfillerCommsBackupIpMulticastSourceFilterAddress6 OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The IP Multicast Source Filter address no 6 for this interface." ::= { itmex2gapfillerComms 175 } itmex2gapfillerCommsBackupVlanEnable OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/Disable VLAN on this interface." ::= { itmex2gapfillerComms 155 } itmex2gapfillerCommsBackupVlanId OBJECT-TYPE SYNTAX Integer32 ( 1 .. 4095 ) MAX-ACCESS read-write STATUS current DESCRIPTION "VLAN ID to use on this interface, if VLAN is enabled. Please note that VLAN ID 4001 and 4002 are used for internal switching and thus cannot be used on any interface." ::= { itmex2gapfillerComms 156 } itmex2gapfillerCommsBackupServiceSNMP OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/Disable SNMP service on this interface." ::= { itmex2gapfillerComms 157 } itmex2gapfillerCommsBackupServiceSCPI OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/Disable SCPI service on this interface." ::= { itmex2gapfillerComms 158 } itmex2gapfillerCommsBackupServiceTSoIP OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/Disable TSoIP service on this interface." ::= { itmex2gapfillerComms 159 } itmex2gapfillerCommsBackupServiceWeb OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/Disable Web (http) service on this interface." ::= { itmex2gapfillerComms 160 } itmex2gapfillerCommsBackupServiceRIP OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/Disable RIP service on this interface." ::= { itmex2gapfillerComms 161 } itmex2gapfillerCommsBackupCurrentIpAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The current IP address for this interface." ::= { itmex2gapfillerComms 162 } itmex2gapfillerCommsBackupCurrentNetmask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The current IP netmask for this interface." ::= { itmex2gapfillerComms 163 } itmex2gapfillerCommsPortEnable OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/Disable this interface." ::= { itmex2gapfillerComms 2500 } itmex2gapfillerCommsPortPhysicalInterface OBJECT-TYPE SYNTAX INTEGER { eth0(0), eth1(1), eth2(2), eth3(3), eth4(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "The Physical Ethernet Interface of this (virtual) interface." ::= { itmex2gapfillerComms 2151 } itmex2gapfillerCommsPortDhcpMode OBJECT-TYPE SYNTAX INTEGER { off(0), client(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/Disable DHCP client on this interface." ::= { itmex2gapfillerComms 2075 } itmex2gapfillerCommsPortStaticIpAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The static IP address for this interface. Will be used if DHCP is disabled or unavailable." ::= { itmex2gapfillerComms 2152 } itmex2gapfillerCommsPortStaticNetmask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The static IP netmask for this interface. Will be used if DHCP is disabled or unavailable." ::= { itmex2gapfillerComms 2153 } itmex2gapfillerCommsPortIpMulticastAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The IP Multicast address for this interface." ::= { itmex2gapfillerComms 2154 } itmex2gapfillerCommsPortIpMulticastSourceFilterMode OBJECT-TYPE SYNTAX INTEGER { sfinclude(0), sfexclude(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies whether the Multicast Source Filter IP Address list is: SFINCLUDE: ONLY receive multicast frames from the source addresses in the list. SFEXCLUDE: Receive all multicast frames EXCEPT from the source addresses in the list." ::= { itmex2gapfillerComms 2193 } itmex2gapfillerCommsPortIpMulticastSourceFilterAddress1 OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The IP Multicast Source Filter address no 1 for this interface." ::= { itmex2gapfillerComms 2170 } itmex2gapfillerCommsPortIpMulticastSourceFilterAddress2 OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The IP Multicast Source Filter address no 2 for this interface." ::= { itmex2gapfillerComms 2171 } itmex2gapfillerCommsPortIpMulticastSourceFilterAddress3 OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The IP Multicast Source Filter address no 3 for this interface." ::= { itmex2gapfillerComms 2172 } itmex2gapfillerCommsPortIpMulticastSourceFilterAddress4 OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The IP Multicast Source Filter address no 4 for this interface." ::= { itmex2gapfillerComms 2173 } itmex2gapfillerCommsPortIpMulticastSourceFilterAddress5 OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The IP Multicast Source Filter address no 5 for this interface." ::= { itmex2gapfillerComms 2174 } itmex2gapfillerCommsPortIpMulticastSourceFilterAddress6 OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The IP Multicast Source Filter address no 6 for this interface." ::= { itmex2gapfillerComms 2175 } itmex2gapfillerCommsPortVlanEnable OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/Disable VLAN on this interface." ::= { itmex2gapfillerComms 2155 } itmex2gapfillerCommsPortVlanId OBJECT-TYPE SYNTAX Integer32 ( 1 .. 4095 ) MAX-ACCESS read-write STATUS current DESCRIPTION "VLAN ID to use on this interface, if VLAN is enabled. Please note that VLAN ID 4001 and 4002 are used for internal switching and thus cannot be used on any interface." ::= { itmex2gapfillerComms 2156 } itmex2gapfillerCommsPortServiceSNMP OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/Disable SNMP service on this interface." ::= { itmex2gapfillerComms 2157 } itmex2gapfillerCommsPortServiceSCPI OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/Disable SCPI service on this interface." ::= { itmex2gapfillerComms 2158 } itmex2gapfillerCommsPortServiceTSoIP OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/Disable TSoIP service on this interface." ::= { itmex2gapfillerComms 2159 } itmex2gapfillerCommsPortServiceWeb OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/Disable Web (http) service on this interface." ::= { itmex2gapfillerComms 2160 } itmex2gapfillerCommsPortServiceRIP OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/Disable RIP service on this interface." ::= { itmex2gapfillerComms 2161 } itmex2gapfillerCommsPortCurrentIpAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The current IP address for this interface." ::= { itmex2gapfillerComms 2162 } itmex2gapfillerCommsPortCurrentNetmask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The current IP netmask for this interface." ::= { itmex2gapfillerComms 2163 } itmex2gapfillerCommsSNMPServicePort OBJECT-TYPE SYNTAX Integer32 ( 1 .. 65535 ) MAX-ACCESS read-write STATUS current DESCRIPTION "The UDP port number used for SNMP Service." ::= { itmex2gapfillerComms 55 } itmex2gapfillerCommsSNMPReadOnlyCommunity OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The Read-only community string used to access the SNMP Service." ::= { itmex2gapfillerComms 56 } itmex2gapfillerCommsSNMPReadWriteCommunity OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The Read-Write community string used to access the SNMP Service." ::= { itmex2gapfillerComms 57 } itmex2gapfillerCommsSNMPTrapCommunity OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The Trap community string used when sending SNMP Traps." ::= { itmex2gapfillerComms 58 } itmex2gapfillerCommsSNMPTrapDestination OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The destination IP address for the SNMP traps." ::= { itmex2gapfillerComms 59 } itmex2gapfillerCommsSNMPTrapDestination2 OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The destination 2 IP address for the SNMP traps." ::= { itmex2gapfillerComms 419 } itmex2gapfillerCommsSNMPTrapDestination3 OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The destination 3 IP address for the SNMP traps." ::= { itmex2gapfillerComms 779 } itmex2gapfillerCommsSNMPTrapDestination4 OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The destination 4 IP address for the SNMP traps." ::= { itmex2gapfillerComms 1139 } itmex2gapfillerCommsSNMPTrapDestination5 OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The destination 5 IP address for the SNMP traps." ::= { itmex2gapfillerComms 1499 } itmex2gapfillerCommsSNMPTrapDestinationPort OBJECT-TYPE SYNTAX Integer32 ( 1 .. 65535 ) MAX-ACCESS read-write STATUS current DESCRIPTION "The UDP port number used for Trap destination ." ::= { itmex2gapfillerComms 60 } itmex2gapfillerCommsSNMPTrapDestinationPort2 OBJECT-TYPE SYNTAX Integer32 ( 1 .. 65535 ) MAX-ACCESS read-write STATUS current DESCRIPTION "The UDP port number used for Trap destination 2." ::= { itmex2gapfillerComms 420 } itmex2gapfillerCommsSNMPTrapDestinationPort3 OBJECT-TYPE SYNTAX Integer32 ( 1 .. 65535 ) MAX-ACCESS read-write STATUS current DESCRIPTION "The UDP port number used for Trap destination 3." ::= { itmex2gapfillerComms 780 } itmex2gapfillerCommsSNMPTrapDestinationPort4 OBJECT-TYPE SYNTAX Integer32 ( 1 .. 65535 ) MAX-ACCESS read-write STATUS current DESCRIPTION "The UDP port number used for Trap destination 4." ::= { itmex2gapfillerComms 1140 } itmex2gapfillerCommsSNMPTrapDestinationPort5 OBJECT-TYPE SYNTAX Integer32 ( 1 .. 65535 ) MAX-ACCESS read-write STATUS current DESCRIPTION "The UDP port number used for Trap destination 5." ::= { itmex2gapfillerComms 1500 } itmex2gapfillerCommsStaticGateway OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The static IP address for the default router (gateway). Will be used unless DHCP is enabled and the DHCP server is configured to include a default router address." ::= { itmex2gapfillerComms 29 } itmex2gapfillerCommsCurrentGateway OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The Current IP address for the default router (gateway)." ::= { itmex2gapfillerComms 30 } itmex2gapfillerCommsStaticHostname OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The static hostname for the device. Will be used if DHCP is disabled or unavailable." ::= { itmex2gapfillerComms 27 } itmex2gapfillerCommsCurrentHostname OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The static hostname for the device. Will be used if DHCP is disabled or unavailable." ::= { itmex2gapfillerComms 28 } itmex2gapfillerCommsStaticDNSDomain OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The static DNS domain name for the device. Will be used if DHCP is disabled or unavailable." ::= { itmex2gapfillerComms 25 } itmex2gapfillerCommsCurrentDNSDomain OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The current DNS domain name for the device." ::= { itmex2gapfillerComms 26 } itmex2gapfillerCommsStaticDNS1ServerAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The IP address of DNS server 1." ::= { itmex2gapfillerComms 19 } itmex2gapfillerCommsStaticDNS2ServerAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The IP address of DNS server 2." ::= { itmex2gapfillerComms 21 } itmex2gapfillerCommsStaticDNS3ServerAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The IP address of DNS server 3." ::= { itmex2gapfillerComms 23 } itmex2gapfillerCommsCurrentDNS1ServerAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The Current IP address of DNS server 1." ::= { itmex2gapfillerComms 20 } itmex2gapfillerCommsCurrentDNS2ServerAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The Current IP address of DNS server 2." ::= { itmex2gapfillerComms 22 } itmex2gapfillerCommsCurrentDNS3ServerAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The Current IP address of DNS server 3." ::= { itmex2gapfillerComms 24 } itmex2gapfillerCommsStaticNtpServerAddress OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The DNS name or IP address of NTP server 1." ::= { itmex2gapfillerComms 31 } itmex2gapfillerCommsStaticNtp2ServerAddress OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The DNS name or IP address of NTP server 2." ::= { itmex2gapfillerComms 3102 } itmex2gapfillerCommsStaticNtp3ServerAddress OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The DNS name or IP address of NTP server 3." ::= { itmex2gapfillerComms 3104 } itmex2gapfillerCommsCurrentNtpServerAddress OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The Current IP address of NTP server 1." ::= { itmex2gapfillerComms 32 } itmex2gapfillerCommsCurrentNtp2ServerAddress OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The Current IP address of NTP server 2." ::= { itmex2gapfillerComms 3202 } itmex2gapfillerCommsCurrentNtp3ServerAddress OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The Current IP address of NTP server 3." ::= { itmex2gapfillerComms 3204 } itmex2gapfillerCommsEmailServerAddress OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The IP address of the Email (SMTP) server." ::= { itmex2gapfillerComms 33 } itmex2gapfillerCommsSecureWebPort OBJECT-TYPE SYNTAX Integer32 ( 1 .. 65535 ) MAX-ACCESS read-write STATUS current DESCRIPTION "The TCP port number used for Web Service in HTTPS." ::= { itmex2gapfillerComms 9940 } itmex2gapfillerCommsWebProto OBJECT-TYPE SYNTAX INTEGER { both(0), https(1), http(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Protocol for web access." ::= { itmex2gapfillerComms 9941 } itmex2gapfillerCommsWebServicePort OBJECT-TYPE SYNTAX Integer32 ( 1 .. 65535 ) MAX-ACCESS read-write STATUS current DESCRIPTION "The TCP port number used for Web Service." ::= { itmex2gapfillerComms 35 } itmex2gapfillerCommsSCPIServicePort OBJECT-TYPE SYNTAX Integer32 ( 1 .. 65535 ) MAX-ACCESS read-write STATUS current DESCRIPTION "The TCP port number used for SCPI Service." ::= { itmex2gapfillerComms 36 } itmex2gapfillerCommsSCPIServerBaudrate OBJECT-TYPE SYNTAX INTEGER { r2400(0), r4800(1), r9600(2), r19200(3), r38400(4), r57600(5), r115200(6) } MAX-ACCESS read-write STATUS current DESCRIPTION "The Baudrate used for SCPI Service on serial port." ::= { itmex2gapfillerComms 37 } itmex2gapfillerCommsSCPIUartInterface OBJECT-TYPE SYNTAX INTEGER { rs232(0), rs485(1), rs485hd(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The Interface used for SCPI Service on serial port." ::= { itmex2gapfillerComms 39 } itmex2gapfillerCommsRipPort OBJECT-TYPE SYNTAX Integer32 ( 1 .. 65535 ) MAX-ACCESS read-write STATUS current DESCRIPTION "The UDP port number used for RIP Service." ::= { itmex2gapfillerComms 38 } itmex2gapfillerCommsIGMPVersion OBJECT-TYPE SYNTAX INTEGER { auto(0), v1(1), v2(2), v3(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Select which IGMP Version to use." ::= { itmex2gapfillerComms 99 } itmex2gapfillerCommsIGMPQueryRobustnessCount OBJECT-TYPE SYNTAX Integer32 ( 2 .. 16 ) MAX-ACCESS read-write STATUS current DESCRIPTION "The Number of Query Replies sent. The higher a number, the more robust IGMP setup is. At the cost of traffic on the network. Note: Changing this parameter doesnt take effect on a network interface until it has (re-)enabled." ::= { itmex2gapfillerComms 97 } itmex2gapfillerCommsIGMPv3UnsolicitedReportInterval OBJECT-TYPE SYNTAX Integer32 ( 1 .. 60000 ) UNITS "1 ms" MAX-ACCESS read-write STATUS current DESCRIPTION "The time interval between unsolicited IGMPv3 reports being sent. See RFC3376. The number of such report being sent is controlled by the Query Robustness Count." ::= { itmex2gapfillerComms 96 } itmex2gapfillerCommsIGMPv2UnsolicitedReportInterval OBJECT-TYPE SYNTAX Integer32 ( 1 .. 60000 ) UNITS "1 ms" MAX-ACCESS read-write STATUS current DESCRIPTION "The time interval between unsolicited IGMPv2/v1 reports being sent. See RFC2236. The number of such report being sent is controlled by the Query Robustness Count." ::= { itmex2gapfillerComms 95 } itmex2gapfillerCommsAccessAllowed OBJECT-TYPE SYNTAX INTEGER { remote(0), local-disable-set(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Current access mode allowed: Remote: SNMP via Ethernet, Local: Frontpanel" ::= { itmex2gapfillerComms 48 } itmex2gapfillerCommsAccessAllowedTimeout OBJECT-TYPE SYNTAX Integer32 ( 1 .. 1440 ) UNITS "1 min" MAX-ACCESS read-write STATUS current DESCRIPTION "Timeout (in minutes) before local mode reverts to remote mode." ::= { itmex2gapfillerComms 49 } itmex2gapfillerCommsAccessAllowedTimeLeft OBJECT-TYPE SYNTAX Integer32 UNITS "1 secs" MAX-ACCESS read-only STATUS current DESCRIPTION "Current time left (in seconds) before local mode reverts to remote mode." ::= { itmex2gapfillerComms 50 } itmex2gapfillerCommsNtpStatusMessage OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The latest NTP Protocol status message." ::= { itmex2gapfillerComms 1000 } itmex2gapfillerCommsNtpStatusLeapsec OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The latest Leap-Second status message." ::= { itmex2gapfillerComms 1001 } itmex2gapfillerCommsNtpStatusSource OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The original clock source type as related by peer." ::= { itmex2gapfillerComms 1002 } itmex2gapfillerCommsNtpPeerRmsJitter OBJECT-TYPE SYNTAX Integer32 UNITS "0.001 ms" MAX-ACCESS read-only STATUS current DESCRIPTION "The RMS Jitter between the NTP server (peer) and this unit." ::= { itmex2gapfillerComms 1003 } itmex2gapfillerCommsNtpPeerClockOffset OBJECT-TYPE SYNTAX Integer32 UNITS "0.001 ms" MAX-ACCESS read-only STATUS current DESCRIPTION "The clock offset between the NTP server (peer) and this unit." ::= { itmex2gapfillerComms 1004 } itmex2gapfillerCommsNtpPeerRoundtripDelay OBJECT-TYPE SYNTAX Integer32 UNITS "0.001 ms" MAX-ACCESS read-only STATUS current DESCRIPTION "The Round-Trip delay between the NTP server (peer) and this unit." ::= { itmex2gapfillerComms 1005 } itmex2gapfillerCommsNtpPeerDispertion OBJECT-TYPE SYNTAX Integer32 UNITS "0.001 ms" MAX-ACCESS read-only STATUS current DESCRIPTION "The dispersion between the NTP server (peer) and this unit." ::= { itmex2gapfillerComms 1006 } itmex2gapfillerCommsNtpLoopRmsJitter OBJECT-TYPE SYNTAX Integer32 UNITS "0.001 ms" MAX-ACCESS read-only STATUS current DESCRIPTION "The RMS Jitter in the loop of this unit." ::= { itmex2gapfillerComms 1007 } itmex2gapfillerCommsNtpLoopClockOffset OBJECT-TYPE SYNTAX Integer32 UNITS "0.001 ms" MAX-ACCESS read-only STATUS current DESCRIPTION "The clock offset between the loop of this unit and the real time." ::= { itmex2gapfillerComms 1008 } itmex2gapfillerCommsNtpLoopRmsWander OBJECT-TYPE SYNTAX Integer32 UNITS "0.001 PPM" MAX-ACCESS read-only STATUS current DESCRIPTION "The RMS wander between loop of this unit and the real time." ::= { itmex2gapfillerComms 1009 } itmex2gapfillerCommsNtpLoopFreqOff OBJECT-TYPE SYNTAX Integer32 UNITS "0.001 PPM" MAX-ACCESS read-only STATUS current DESCRIPTION "The frequency offset between loop of this unit and the real time." ::= { itmex2gapfillerComms 1010 } itmex2gapfillerCommsAccessPasswordObserver OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The access password for Observer level access. Will always read as empty." ::= { itmex2gapfillerComms 51 } itmex2gapfillerCommsAccessPasswordOperator OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The access password for Operator level access. Will always read as empty." ::= { itmex2gapfillerComms 52 } itmex2gapfillerCommsAccessPasswordAdministrator OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The access password for Administrator level access. Will always read as empty." ::= { itmex2gapfillerComms 53 } itmex2gapfillerCommsStaticRouteTable OBJECT-TYPE SYNTAX SEQUENCE OF Itmex2gapfillerCommsStaticRouteEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains the static routing table entries" ::= { itmex2gapfillerComms 300 } itmex2gapfillerCommsStaticRouteEntry OBJECT-TYPE SYNTAX Itmex2gapfillerCommsStaticRouteEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry for the static network routing table" INDEX { itmex2gapfillerCommsStaticRouteNO } ::= { itmex2gapfillerCommsStaticRouteTable 1 } Itmex2gapfillerCommsStaticRouteEntry ::= SEQUENCE { itmex2gapfillerCommsStaticRouteNO Integer32, itmex2gapfillerCommsStaticRouteType INTEGER, itmex2gapfillerCommsStaticRoutePrefix IpAddress, itmex2gapfillerCommsStaticRoutePrefixSize Integer32, itmex2gapfillerCommsStaticRouteTarget IpAddress, itmex2gapfillerCommsStaticRoutePhysicalInterface INTEGER } itmex2gapfillerCommsStaticRouteNO OBJECT-TYPE SYNTAX Integer32 ( 1 .. 16 ) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Unique ID for this static route entry" ::= { itmex2gapfillerCommsStaticRouteEntry 1 } itmex2gapfillerCommsStaticRouteType OBJECT-TYPE SYNTAX INTEGER { unused(0), normal(1), physicalif(2), recursive(3), drop(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "Type of a Route table entry." ::= { itmex2gapfillerCommsStaticRouteEntry 2 } itmex2gapfillerCommsStaticRoutePrefix OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The IP address part of prefix for a route table entry. If the address is 0.0.0.0, the entry will not be used." ::= { itmex2gapfillerCommsStaticRouteEntry 3 } itmex2gapfillerCommsStaticRoutePrefixSize OBJECT-TYPE SYNTAX Integer32 ( 0 .. 32 ) MAX-ACCESS read-write STATUS current DESCRIPTION "The number of bits in the network part of the prefix for route table entry $. If the number is 0 (zero), the entry will not be used." ::= { itmex2gapfillerCommsStaticRouteEntry 4 } itmex2gapfillerCommsStaticRouteTarget OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The target IP address for a route table entry. Only used if itmex2gapfillerCommsStaticRouteType is normal(1) or recursive(3). If the target address is 0.0.0.0, the entry will not be used." ::= { itmex2gapfillerCommsStaticRouteEntry 5 } itmex2gapfillerCommsStaticRoutePhysicalInterface OBJECT-TYPE SYNTAX INTEGER { eth0(0), eth1(1), eth2(2), eth3(3), eth4(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "The Physical Ethernet Interface to use for a Route table entry. Only used when itmex2gapfillerCommsStaticRouteType is physicalif(2)." ::= { itmex2gapfillerCommsStaticRouteEntry 6 } -- -- itmex2gapfiller Precorrector sub-tree -- itmex2gapfillerPrecorrectVersionadaptive OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The Adaptive precorrector version." ::= { itmex2gapfillerPrecorrect 100 } itmex2gapfillerPrecorrectVersionoptipower OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The OptiPower version." ::= { itmex2gapfillerPrecorrect 101 } itmex2gapfillerPrecorrectHeadroom OBJECT-TYPE SYNTAX INTEGER { r12(0), r15(1), r18(2), r21(3), r24(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "selection of the wanted headroom" ::= { itmex2gapfillerPrecorrect 5 } itmex2gapfillerPrecorrectLinearAdaptive OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Linear precorrection curve active in the system" ::= { itmex2gapfillerPrecorrect 79 } itmex2gapfillerPrecorrectLinearMode OBJECT-TYPE SYNTAX INTEGER { monitoring(0), static(1), adaptive(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "selection of the operational mode for the linear precorrector
(note: legacy term used for backward compatibility. MONITORING Equal to the mode named BYPASS in the WEB GUI )" ::= { itmex2gapfillerPrecorrect 2 } itmex2gapfillerPrecorrectLinearSenseEnable OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "By using this, it is possible to control wether to use the linear Sense Input or not." ::= { itmex2gapfillerPrecorrect 46 } itmex2gapfillerPrecorrectLinearMonitorStatus OBJECT-TYPE SYNTAX INTEGER { not-running(0), monitoring(1), initialising(2), initialising-0(3), initialising-10(4), initialising-20(5), initialising-30(6), initialising-40(7), initialising-50(8), initialising-60(9), initialising-70(10), initialising-80(11), initialising-90(12), auto-applying(13), completed(14) } MAX-ACCESS read-only STATUS current DESCRIPTION "linear Precor state" ::= { itmex2gapfillerPrecorrect 24 } itmex2gapfillerPrecorrectLinearMonitorSenseLevel OBJECT-TYPE SYNTAX Integer32 UNITS "0.1 dBm" MAX-ACCESS read-only STATUS current DESCRIPTION "Level meassured at the linear sense input with offset defined by attenuation" ::= { itmex2gapfillerPrecorrect 22 } itmex2gapfillerPrecorrectLinearMonitorSenseValid OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Is linear sense input information valid" ::= { itmex2gapfillerPrecorrect 23 } itmex2gapfillerPrecorrectLinearMonitorSenseBadCount OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of bad/invalid sense counts, made by the linear adaptive precorrector." ::= { itmex2gapfillerPrecorrect 8 } itmex2gapfillerPrecorrectLinearMonitorAmplitudeRipple OBJECT-TYPE SYNTAX Integer32 UNITS "0.1 dB" MAX-ACCESS read-only STATUS current DESCRIPTION "Amplitude ripple" ::= { itmex2gapfillerPrecorrect 26 } itmex2gapfillerPrecorrectLinearMonitorAmplitudeRippleValid OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Is amplitude ripple information valid" ::= { itmex2gapfillerPrecorrect 30 } itmex2gapfillerPrecorrectLinearMonitorGroupDelay OBJECT-TYPE SYNTAX Integer32 UNITS "0.1 ns" MAX-ACCESS read-only STATUS current DESCRIPTION "Group delay" ::= { itmex2gapfillerPrecorrect 27 } itmex2gapfillerPrecorrectLinearMonitorGroupDelayValid OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Is group delay information valid" ::= { itmex2gapfillerPrecorrect 31 } itmex2gapfillerPrecorrectLinearMonitorDiscartedIterations OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of iterations discarded by the linear adaptive precorrector due to noisy signal samples." ::= { itmex2gapfillerPrecorrect 47 } itmex2gapfillerPrecorrectLinearMonitorIterations OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of iterations made by the linear adaptive precorrector." ::= { itmex2gapfillerPrecorrect 19 } itmex2gapfillerPrecorrectLinearAdapMode OBJECT-TYPE SYNTAX INTEGER { idle(0), autorun(1), runtotarget(2), continuous(3), single(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "selection of the operational mode for the linear adaptive precorrector
(note: legacy term used for backward compatibility. IDLE Equal to the mode named MONITORING in the WEB GUI )" ::= { itmex2gapfillerPrecorrect 1 } itmex2gapfillerPrecorrectLinearAdapAmplitudeRippleTargetLevel OBJECT-TYPE SYNTAX Integer32 ( 0 .. 10000 ) UNITS "0.1 dB" MAX-ACCESS read-write STATUS current DESCRIPTION "Define a adaptive target level for the amplitude ripple" ::= { itmex2gapfillerPrecorrect 42 } itmex2gapfillerPrecorrectLinearAdapAmplitudeRippleTargetHys OBJECT-TYPE SYNTAX Integer32 ( 0 .. 100000 ) UNITS "0.01 dB" MAX-ACCESS read-write STATUS current DESCRIPTION "Define a adaptive target level hysteresis for the amplitude ripple" ::= { itmex2gapfillerPrecorrect 14 } itmex2gapfillerPrecorrectLinearAdapAmplitudeRippleEnable OBJECT-TYPE SYNTAX INTEGER { off(0), on(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable amplitude ripple as a trigger for the AUTORUN and RUNTOTARGET modes" ::= { itmex2gapfillerPrecorrect 10 } itmex2gapfillerPrecorrectLinearAdapGroupDelayTargetLevel OBJECT-TYPE SYNTAX Integer32 ( 0 .. 10000 ) UNITS "0.1 ns" MAX-ACCESS read-write STATUS current DESCRIPTION "Define a adaptive target level for the group delay" ::= { itmex2gapfillerPrecorrect 43 } itmex2gapfillerPrecorrectLinearAdapGroupDelayTargetHys OBJECT-TYPE SYNTAX Integer32 ( 0 .. 100000 ) UNITS "0.01 ns" MAX-ACCESS read-write STATUS current DESCRIPTION "Define a adaptive target level hysteresis for the group delay" ::= { itmex2gapfillerPrecorrect 15 } itmex2gapfillerPrecorrectLinearAdapGroupDelayEnable OBJECT-TYPE SYNTAX INTEGER { off(0), on(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable group delay as a trigger for the AUTORUN and RUNTOTARGET modes" ::= { itmex2gapfillerPrecorrect 11 } itmex2gapfillerPrecorrectLinearAdapPresetNeutralload OBJECT-TYPE SYNTAX INTEGER { noop(0), activate(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Apply the Neutral spectrum curve" ::= { itmex2gapfillerPrecorrect 82 } itmex2gapfillerPrecorrectLinearAdapPresetFactoryrecall OBJECT-TYPE SYNTAX INTEGER { noop(0), activate(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Recall the stored Factory spectrum curve from memory" ::= { itmex2gapfillerPrecorrect 83 } itmex2gapfillerPrecorrectLinearAdapPresetFactorystore OBJECT-TYPE SYNTAX INTEGER { noop(0), activate(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Store current adptive precorrected spectrum as factory curve" ::= { itmex2gapfillerPrecorrect 84 } itmex2gapfillerPrecorrectLinearAdapPresetFactoryclear OBJECT-TYPE SYNTAX INTEGER { noop(0), activate(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Clear factory spectrum curve stored in memory to neutral curve" ::= { itmex2gapfillerPrecorrect 85 } itmex2gapfillerPrecorrectLinearAttenuation OBJECT-TYPE SYNTAX Integer32 ( -1000 .. 1000 ) UNITS "0.1 dB" MAX-ACCESS read-write STATUS current DESCRIPTION "Define a attenuation level for the sense input" ::= { itmex2gapfillerPrecorrect 78 } itmex2gapfillerPrecorrectNonlinAdap OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Non-Linear precorrection curve active in the system" ::= { itmex2gapfillerPrecorrect 80 } itmex2gapfillerPrecorrectNonlinMode OBJECT-TYPE SYNTAX INTEGER { monitoring(0), static(1), adaptive(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "selection of the operational mode for the non-linear precorrector
(note: legacy term used for backward compatibility. MONITORING Equal to the mode named BYPASS in the WEB GUI )" ::= { itmex2gapfillerPrecorrect 4 } itmex2gapfillerPrecorrectNonlinSenseEnable OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "By using this, it is possible to control wether to use the nonlinear Sense Input or not." ::= { itmex2gapfillerPrecorrect 48 } itmex2gapfillerPrecorrectNonlinMonitorStatus OBJECT-TYPE SYNTAX INTEGER { not-running(0), monitoring(1), initialising(2), initialising-0(3), initialising-10(4), initialising-20(5), initialising-30(6), initialising-40(7), initialising-50(8), initialising-60(9), initialising-70(10), initialising-80(11), initialising-90(12), auto-applying(13), completed(14) } MAX-ACCESS read-only STATUS current DESCRIPTION "Nonlinear Precor state" ::= { itmex2gapfillerPrecorrect 40 } itmex2gapfillerPrecorrectNonlinMonitorSenseLevel OBJECT-TYPE SYNTAX Integer32 UNITS "0.1 dBm" MAX-ACCESS read-only STATUS current DESCRIPTION "Level meassured at the Nonlinear sense input with offset defined by attenuation" ::= { itmex2gapfillerPrecorrect 38 } itmex2gapfillerPrecorrectNonlinMonitorSenseValid OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Is Nonlinear sense input information valid" ::= { itmex2gapfillerPrecorrect 39 } itmex2gapfillerPrecorrectNonlinMonitorSenseBadCount OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of bad/invalid sense counts, made by the nonlinear adaptive precorrector." ::= { itmex2gapfillerPrecorrect 9 } itmex2gapfillerPrecorrectNonlinMonitorLowerShoulderLevel OBJECT-TYPE SYNTAX Integer32 UNITS "0.1 dB" MAX-ACCESS read-only STATUS current DESCRIPTION "Lower shoulder level" ::= { itmex2gapfillerPrecorrect 28 } itmex2gapfillerPrecorrectNonlinMonitorLowerShoulderValid OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Is Lower shoulder information valid" ::= { itmex2gapfillerPrecorrect 32 } itmex2gapfillerPrecorrectNonlinMonitorUpperShoulderLevel OBJECT-TYPE SYNTAX Integer32 UNITS "0.1 dB" MAX-ACCESS read-only STATUS current DESCRIPTION "Upper shoulder level" ::= { itmex2gapfillerPrecorrect 29 } itmex2gapfillerPrecorrectNonlinMonitorUpperShoulderValid OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Is Upper shoulder information valid" ::= { itmex2gapfillerPrecorrect 33 } itmex2gapfillerPrecorrectNonlinMonitorDiscartedIterations OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of iterations discarded by the non-linear adaptive precorrector dur to noisy signal samples." ::= { itmex2gapfillerPrecorrect 49 } itmex2gapfillerPrecorrectNonlinMonitorIterations OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of iterations made by the nonlinear adaptive precorrector." ::= { itmex2gapfillerPrecorrect 35 } itmex2gapfillerPrecorrectNonlinMonitorMer OBJECT-TYPE SYNTAX Integer32 UNITS "0.1 dB" MAX-ACCESS read-only STATUS current DESCRIPTION "MER" ::= { itmex2gapfillerPrecorrect 50 } itmex2gapfillerPrecorrectNonlinMonitorMerValid OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Is MER information valid" ::= { itmex2gapfillerPrecorrect 51 } itmex2gapfillerPrecorrectNonlinMonitorPapr OBJECT-TYPE SYNTAX Integer32 UNITS "0.1 dB" MAX-ACCESS read-only STATUS current DESCRIPTION "PAPR level" ::= { itmex2gapfillerPrecorrect 52 } itmex2gapfillerPrecorrectNonlinMonitorPaprValid OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Is Papr information valid" ::= { itmex2gapfillerPrecorrect 53 } itmex2gapfillerPrecorrectNonlinAttenuation OBJECT-TYPE SYNTAX Integer32 ( -1000 .. 1000 ) UNITS "0.1 dB" MAX-ACCESS read-write STATUS current DESCRIPTION "Define a attenuation level for the sense input" ::= { itmex2gapfillerPrecorrect 77 } itmex2gapfillerPrecorrectNonlinAdaptiveMode OBJECT-TYPE SYNTAX INTEGER { idle(0), autorun(1), runtotarget(2), continuous(3), single(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "selection of the operational mode for the non-linear adaptive precorrector
(note: legacy term used for backward compatibility. IDLE Equal to the mode named MONITORING in the WEB GUI )" ::= { itmex2gapfillerPrecorrect 3 } itmex2gapfillerPrecorrectNonlinAdaptiveMaxRfPaprEnable OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable the modulator's output PAPR limiter function" ::= { itmex2gapfillerPrecorrect 55 } itmex2gapfillerPrecorrectNonlinAdaptiveMaxRfPaprLimit OBJECT-TYPE SYNTAX Integer32 ( 20 .. 180 ) UNITS "0.1 dB" MAX-ACCESS read-write STATUS current DESCRIPTION "Maximum RF PAPR Limitation" ::= { itmex2gapfillerPrecorrect 56 } itmex2gapfillerPrecorrectNonlinAdaptiveMerTarget OBJECT-TYPE SYNTAX Integer32 ( 0 .. 800 ) UNITS "0.1 dB" MAX-ACCESS read-write STATUS current DESCRIPTION "Define a target level for the MER" ::= { itmex2gapfillerPrecorrect 57 } itmex2gapfillerPrecorrectNonlinAdaptiveMerTargetHys OBJECT-TYPE SYNTAX Integer32 ( 0 .. 1000 ) UNITS "0.01 dB" MAX-ACCESS read-write STATUS current DESCRIPTION "Define a target MER hysteresis" ::= { itmex2gapfillerPrecorrect 58 } itmex2gapfillerPrecorrectNonlinAdaptiveMerEnable OBJECT-TYPE SYNTAX INTEGER { off(0), on(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable MER as a trigger for the AUTORUN and RUNTOTARGET modes" ::= { itmex2gapfillerPrecorrect 59 } itmex2gapfillerPrecorrectNonlinAdaptiveLowerShoulderTargetLvl OBJECT-TYPE SYNTAX Integer32 ( -800 .. 0 ) UNITS "0.1 dB" MAX-ACCESS read-write STATUS current DESCRIPTION "Define a adaptive target level for the lower shoulder" ::= { itmex2gapfillerPrecorrect 44 } itmex2gapfillerPrecorrectNonlinAdaptiveLowerShoulderTargetHys OBJECT-TYPE SYNTAX Integer32 ( 0 .. 1000 ) UNITS "0.01 dB" MAX-ACCESS read-write STATUS current DESCRIPTION "Define a adaptive target level hysteresis for the lower shoulder" ::= { itmex2gapfillerPrecorrect 16 } itmex2gapfillerPrecorrectNonlinAdaptiveLowerShoulderEnable OBJECT-TYPE SYNTAX INTEGER { off(0), on(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable shoulder level (lower) as a trigger for the AUTORUN and RUNTOTARGET modes" ::= { itmex2gapfillerPrecorrect 12 } itmex2gapfillerPrecorrectNonlinAdaptiveUpperShoulderTargetLvl OBJECT-TYPE SYNTAX Integer32 ( -800 .. 0 ) UNITS "0.1 dB" MAX-ACCESS read-write STATUS current DESCRIPTION "Define a adaptive target level for the upper shoulder" ::= { itmex2gapfillerPrecorrect 45 } itmex2gapfillerPrecorrectNonlinAdaptiveUpperShoulderTargetHys OBJECT-TYPE SYNTAX Integer32 ( 0 .. 1000 ) UNITS "0.01 dB" MAX-ACCESS read-write STATUS current DESCRIPTION "Define a adaptive target level hysteresis for the upper shoulder" ::= { itmex2gapfillerPrecorrect 17 } itmex2gapfillerPrecorrectNonlinAdaptiveUpperShoulderEnable OBJECT-TYPE SYNTAX INTEGER { off(0), on(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable shoulder level (upper) as a trigger for the AUTORUN and RUNTOTARGET modes" ::= { itmex2gapfillerPrecorrect 13 } itmex2gapfillerPrecorrectNonlinAdaptivePresetNeutralload OBJECT-TYPE SYNTAX INTEGER { noop(0), activate(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Apply the Neutral spectrum curve" ::= { itmex2gapfillerPrecorrect 90 } itmex2gapfillerPrecorrectNonlinAdaptivePresetFactoryrecall OBJECT-TYPE SYNTAX INTEGER { noop(0), activate(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Recall the stored Factory spectrum curve from memory" ::= { itmex2gapfillerPrecorrect 91 } itmex2gapfillerPrecorrectNonlinAdaptivePresetFactorystore OBJECT-TYPE SYNTAX INTEGER { noop(0), activate(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Store current adptive precorrected spectrum as factory curve" ::= { itmex2gapfillerPrecorrect 92 } itmex2gapfillerPrecorrectNonlinAdaptivePresetFactoryclear OBJECT-TYPE SYNTAX INTEGER { noop(0), activate(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Clear factory spectrum curve stored in memory to neutral curve" ::= { itmex2gapfillerPrecorrect 93 } itmex2gapfillerPrecorrectPaprClipping OBJECT-TYPE SYNTAX Integer32 ( 200 .. 1200 ) UNITS "0.01 dB" MAX-ACCESS read-write STATUS current DESCRIPTION "set the built-in peak clipper function. The value 'max' corresponds to an unclipped COFDM signal (12dB peak to average ratio). The value 'min' correspondsto COFDM signal where all peaks >2dB above average power are clipped. When feeding the output from the modulator through an amplifier the best overall performance result is normally obtained if the clipper value used by modulator clips the signal just a fraction before the amplifier would clip the signal." ::= { itmex2gapfillerPrecorrect 60 } itmex2gapfillerPrecorrectPaprShaping OBJECT-TYPE SYNTAX Integer32 ( 0 .. 100 ) UNITS "1 %" MAX-ACCESS read-write STATUS current DESCRIPTION "Set the output peak shaping filter hardness. The value 'min' correspond to traditional 'hard-clipping' where the clipper noise is equally distributed below, inside and above the COFDM spectrum (clipper noise clearly visible in the form of noise above and below the spectrum. The value 'max' corresponds to maximum soft clipping where the clipper noise in the sidebands (above and below the COFDM spectrum) is subjected to maximum suppression while still maintaining the exact clipper value (peak-to-average-ration). The suppression of the sideband noise is obtained as a tradeoff against the in band performance. The clip filter setting is typically selected as a compromise between spectrum shoulder performance and in-band signal performance (MER)." ::= { itmex2gapfillerPrecorrect 61 } itmex2gapfillerPrecorrectClipperMode OBJECT-TYPE SYNTAX INTEGER { monitoring(0), static(1), adaptive(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Selection between no, static (manual) and adaptive clipper function" ::= { itmex2gapfillerPrecorrect 74 } itmex2gapfillerPrecorrectClipperAdaptive OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Clipper shaped by the OptiClipper algorithm" ::= { itmex2gapfillerPrecorrect 75 } itmex2gapfillerPrecorrectClipperEnable OBJECT-TYPE SYNTAX INTEGER { off(0), on(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "Clipper enable" ::= { itmex2gapfillerPrecorrect 76 } itmex2gapfillerPrecorrectClipperAdaptiveMode OBJECT-TYPE SYNTAX INTEGER { monitoring(0), continuous(1), single(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Selection of the operational mode for the adaptive clipper function" ::= { itmex2gapfillerPrecorrect 63 } itmex2gapfillerPrecorrectClipperAdaptiveShaping OBJECT-TYPE SYNTAX Integer32 ( 99 .. 100 ) UNITS "1 %" MAX-ACCESS read-write STATUS current DESCRIPTION "Depricated Therefore min and max value are set to 100% Set the peak shaping filter hardness. The value 'min' correspond to traditional 'hard-clipping' where the clipper noise is equally distributed below, inside and above the COFDM spectrum (clipper noise clearly visible in the form of noise above and below the spectrum. The value 'max' corresponds to maximum soft clipping where the clipper noise in the sidebands (above and below the COFDM spectrum) is subjected to maximum suppression while still maintaining the exact clipper value (peak-to-average-ration). The suppression of the sideband noise is obtained as a tradeoff against the in band performance. The clip filter setting is typically selected as a compromise between spectrum shoulder performance and in-band signal performance (MER)." ::= { itmex2gapfillerPrecorrect 81 } itmex2gapfillerPrecorrectClipperPresetNeutralload OBJECT-TYPE SYNTAX INTEGER { noop(0), activate(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Apply the Neutral clipper curve" ::= { itmex2gapfillerPrecorrect 94 } itmex2gapfillerPrecorrectClipperPresetFactoryrecall OBJECT-TYPE SYNTAX INTEGER { noop(0), activate(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Recall the stored Factory clipper curve from memory" ::= { itmex2gapfillerPrecorrect 95 } itmex2gapfillerPrecorrectClipperPresetFactorystore OBJECT-TYPE SYNTAX INTEGER { noop(0), activate(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Store current adptive precorrected clipper as factory curve" ::= { itmex2gapfillerPrecorrect 96 } itmex2gapfillerPrecorrectClipperPresetFactoryclear OBJECT-TYPE SYNTAX INTEGER { noop(0), activate(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Clear factory clipper curve stored in memory to neutral curve" ::= { itmex2gapfillerPrecorrect 97 } itmex2gapfillerPrecorrectClipperMonitorStatus OBJECT-TYPE SYNTAX INTEGER { not-running(0), monitoring(1), initialising(2), initialising-0(3), initialising-10(4), initialising-20(5), initialising-30(6), initialising-40(7), initialising-50(8), initialising-60(9), initialising-70(10), initialising-80(11), initialising-90(12), auto-applying(13), completed(14) } MAX-ACCESS read-only STATUS current DESCRIPTION "OptiClipper state" ::= { itmex2gapfillerPrecorrect 64 } itmex2gapfillerPrecorrectClipperMonitorShoulderLevelLower OBJECT-TYPE SYNTAX Integer32 UNITS "0.1 dB" MAX-ACCESS read-only STATUS current DESCRIPTION "Lower shoulder level" ::= { itmex2gapfillerPrecorrect 65 } itmex2gapfillerPrecorrectClipperMonitorShoulderLevelLowerValid OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Is Lower shoulder information valid" ::= { itmex2gapfillerPrecorrect 66 } itmex2gapfillerPrecorrectClipperMonitorShoulderLevelUpper OBJECT-TYPE SYNTAX Integer32 UNITS "0.1 dB" MAX-ACCESS read-only STATUS current DESCRIPTION "Upper shoulder level" ::= { itmex2gapfillerPrecorrect 67 } itmex2gapfillerPrecorrectClipperMonitorShoulderLevelUpperValid OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Is Upper shoulder information valid" ::= { itmex2gapfillerPrecorrect 68 } itmex2gapfillerPrecorrectClipperMonitorMer OBJECT-TYPE SYNTAX Integer32 UNITS "0.1 dB" MAX-ACCESS read-only STATUS current DESCRIPTION "MER level" ::= { itmex2gapfillerPrecorrect 69 } itmex2gapfillerPrecorrectClipperMonitorMerValid OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Is MER information valid" ::= { itmex2gapfillerPrecorrect 70 } itmex2gapfillerPrecorrectClipperMonitorPapr OBJECT-TYPE SYNTAX Integer32 UNITS "0.1 dB" MAX-ACCESS read-only STATUS current DESCRIPTION "PAPR level" ::= { itmex2gapfillerPrecorrect 71 } itmex2gapfillerPrecorrectClipperMonitorPaprValid OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Is Papr information valid" ::= { itmex2gapfillerPrecorrect 72 } itmex2gapfillerPrecorrectClipperMonitorIterations OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of Iterations performed by the OptiClipper algorithm" ::= { itmex2gapfillerPrecorrect 73 } itmex2gapfillerPrecorrectLastTurnAroundTime OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "PrecorrectLastTurnAroundTime " ::= { itmex2gapfillerPrecorrect 6 } itmex2gapfillerPrecorrectSecondsSinceLastUpdate OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "PrecorrectSecondsSinceLastUpdate " ::= { itmex2gapfillerPrecorrect 7 } itmex2gapfillerPrecorrectLinearLoadNeutral OBJECT-TYPE SYNTAX INTEGER { noop(0), load(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "PrecorrectLinearLoadNeutral " ::= { itmex2gapfillerPrecorrect 20 } itmex2gapfillerPrecorrectLinearLoadFactory OBJECT-TYPE SYNTAX INTEGER { noop(0), load(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "PrecorrectLinearLoadFactory " ::= { itmex2gapfillerPrecorrect 21 } itmex2gapfillerPrecorrectLinearUpdateFactoryCurve OBJECT-TYPE SYNTAX INTEGER { noop(0), update(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "PrecorrectLinearUpdateFactoryCurve " ::= { itmex2gapfillerPrecorrect 25 } itmex2gapfillerPrecorrectNonlinearLoadNeutral OBJECT-TYPE SYNTAX INTEGER { noop(0), load(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "PrecorrectNonlinearLoadNeutral " ::= { itmex2gapfillerPrecorrect 36 } itmex2gapfillerPrecorrectNonlinearLoadFactory OBJECT-TYPE SYNTAX INTEGER { noop(0), load(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "PrecorrectNonlinearLoadFactory " ::= { itmex2gapfillerPrecorrect 37 } itmex2gapfillerPrecorrectNonlinearUpdateFactoryCurve OBJECT-TYPE SYNTAX INTEGER { noop(0), update(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "PrecorrectNonlinearUpdateFactoryCurve " ::= { itmex2gapfillerPrecorrect 41 } -- -- itmex2gapfiller Backplane sub-tree -- itmex2gapfillerBackplanePolarityHardMute OBJECT-TYPE SYNTAX INTEGER { activelow(0), activehigh(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Set the polarity of the Hard Mute input pin on the PTT2 backplane." ::= { itmex2gapfillerBackplane 1 } itmex2gapfillerBackplanePolarityRFFail OBJECT-TYPE SYNTAX INTEGER { activelow(0), activehigh(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Set the polarity of the RF Fail output pin on the PTT2 backplane." ::= { itmex2gapfillerBackplane 2 } -- -- itmex2gapfiller Notifications sub-tree -- itmex2gapfillerNotif OBJECT IDENTIFIER ::= { itmex2gapfillerNotifs 0 } itmex2gapfillerNotifMessage OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The current alarm notification message" ::= { itmex2gapfillerNotifs 1 } itmex2gapfillerNotifState OBJECT-TYPE SYNTAX INTEGER { off(0), activated(1) } MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The current alarm notification state" ::= { itmex2gapfillerNotifs 2 } itmex2gapfillerNotifLocalTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The time the current alarm notification state changed" ::= { itmex2gapfillerNotifs 3 } -- SNMPv2 compliance nonsense -- itmex2gapfillerCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for systems supporting the this MIB." MODULE -- this module MANDATORY-GROUPS { itmex2gapfillerSystemGroup, itmex2gapfillerInputGroup, itmex2gapfillerOutputGroup, itmex2gapfillerTestGroup, itmex2gapfillerAlarmGroup, itmex2gapfillerPresetGroup, itmex2gapfillerEventlogGroup, itmex2gapfillerCommsGroup, itmex2gapfillerPrecorrectorGroup } GROUP itmex2gapfillerGpsGroup DESCRIPTION "This group is optional." GROUP itmex2gapfillerChannelFilterGroup DESCRIPTION "This group is optional." GROUP itmex2gapfillerReceptionGroup DESCRIPTION "This group is optional." ::= { itmex2gapfillerCompliances 1 } itmex2gapfillerGroups OBJECT IDENTIFIER ::= { itmex2gapfillerConformance 2 } itmex2gapfillerSystemGroup OBJECT-GROUP OBJECTS { itmex2gapfillerSystemInstrumentFW1Rev, itmex2gapfillerSystemInstrumentFW1RevBL, itmex2gapfillerSystemInstrumentFW2Rev, itmex2gapfillerSystemInstrumentFW2RevBL, itmex2gapfillerSystemInstrumentFW3Rev, itmex2gapfillerSystemInstrumentFW4Rev, itmex2gapfillerSystemInstrumentPCBRev, itmex2gapfillerSystemInstrumentCalibrationRev, itmex2gapfillerSystemInstrumentCalibrationDate, itmex2gapfillerSystemReboot, itmex2gapfillerSystemRebootDefaultConfig, itmex2gapfillerSystemDateTime, itmex2gapfillerSystemImage0Version, itmex2gapfillerSystemImage0InstalledDate, itmex2gapfillerSystemImage1version, itmex2gapfillerSystemImage1InstalledDate, itmex2gapfillerSystemScheduledActionRecurrence, itmex2gapfillerSystemScheduledActionHour, itmex2gapfillerSystemScheduledActionMinute, itmex2gapfillerSystemScheduledActionWeekday, itmex2gapfillerSystemScheduledActionMonthDay, itmex2gapfillerSystemScheduledActionDate, itmex2gapfillerSystemScheduledActionRandomDelay, itmex2gapfillerSystemScheduledActionAction, itmex2gapfillerSystemScheduledActionRepeaterMode, itmex2gapfillerSystemScheduledActionPresetNo, itmex2gapfillerSystemScheduledActionRebootImage, itmex2gapfillerSystemScheduledActionRebootSystemType, itmex2gapfillerSystemScheduledActionMute, itmex2gapfillerSystemScheduledActionSWUpgradeProtocol, itmex2gapfillerSystemScheduledActionSWUpgradeUsername, itmex2gapfillerSystemScheduledActionSWUpgradePassword, itmex2gapfillerSystemScheduledActionSWUpgradeImageServer, itmex2gapfillerSystemScheduledActionSWUpgradeImagePath, itmex2gapfillerSystemServiceLED , itmex2gapfillerSystemLanguage , itmex2gapfillerSystemType, itmex2gapfillerSystemModulationStandard, itmex2gapfillerSystemCurrentImage, itmex2gapfillerSystemInstrumentKU, itmex2gapfillerSystemInstrumentType, itmex2gapfillerSystemInstrumentOptions, itmex2gapfillerSystemDateTimeSync, itmex2gapfillerSystemDateTimeSyncActual, itmex2gapfillerSystemTimezone, itmex2gapfillerSystemInstrumentSWRev, itmex2gapfillerSystemInstrumentBootLoaderRev, itmex2gapfillerSystemInstrumentKernelRev, itmex2gapfillerSystemOperationOnTime, itmex2gapfillerSystemOperationOnAirTime, itmex2gapfillerSystemOperationNumberOfBoots, itmex2gapfillerSystemBackplaneid, itmex2gapfillerSystemBackplaneIdRaw, itmex2gapfillerSystemBackplaneIdPcb, itmex2gapfillerSystemBackplaneIdCableOptions, itmex2gapfillerSystemBackplaneIdMAnuf, itmex2gapfillerSystemBackplaneCalibrationDate, itmex2gapfillerSystemBackplaneCalibrationSw, itmex2gapfillerSystemBackplaneIdPartlist } STATUS current DESCRIPTION "System group" ::= { itmex2gapfillerGroups 1} itmex2gapfillerInputGroup OBJECT-GROUP OBJECTS { itmex2gapfillerInputASITSPrimarySource, itmex2gapfillerInputASITSSecondarySource, itmex2gapfillerInputASIAutoRoutingPolicy, itmex2gapfillerInputTSPrimaryStatus, itmex2gapfillerInputTSSecondaryStatus, itmex2gapfillerInputTSHp, itmex2gapfillerInputTSLp, itmex2gapfillerInputEffectiveAutoroutingPolicy, itmex2gapfillerInputTSHpBitrate, itmex2gapfillerInputTSLpBitrate, itmex2gapfillerInputRefOcxoDevType, itmex2gapfillerInputRefOcxoCalDate, itmex2gapfillerInputRefOcxoCalVer, itmex2gapfillerInputRefDirection, itmex2gapfillerInputRefSource, itmex2gapfillerInputRefStatus, itmex2gapfillerInputRef10MhzImpedance, itmex2gapfillerInputRef10MhzHoldoverDelay, itmex2gapfillerInputRef10MhzHoldoverForever, itmex2gapfillerInputRef1PPSImpedance, itmex2gapfillerInputRef1PPSHoldoverDelay, itmex2gapfillerInputRef1PPSHoldoverForever, itmex2gapfillerInputRef1PPSTrigSlope, itmex2gapfillerInputRef1PPSTrigLevel, itmex2gapfillerInputASIAutoRoutingDelayHp2Lp, itmex2gapfillerInputASIAutoRoutingDelayLp2Hp } STATUS current DESCRIPTION "Input group" ::= { itmex2gapfillerGroups 3} itmex2gapfillerOutputGroup OBJECT-GROUP OBJECTS { itmex2gapfillerOutputMode, itmex2gapfillerOutputEffectiveLevel, itmex2gapfillerOutputActualLevel, itmex2gapfillerOutputPolarity, itmex2gapfillerOutputRfFrequency, itmex2gapfillerOutputRfFrequencyOffset, itmex2gapfillerOutputRfLevel, itmex2gapfillerOutputRfCableMode, itmex2gapfillerOutputRfCableConstantLevelOffset, itmex2gapfillerOutputRfCableFrequencyLevelOffset0, itmex2gapfillerOutputRfCableFrequencyLevelOffset1, itmex2gapfillerOutputRfCableFrequencyLevelOffset2, itmex2gapfillerOutputRfCableFrequencyLevelOffset3, itmex2gapfillerOutputRfCableFrequencyLevelOffset4, itmex2gapfillerOutputRfCableFrequencyLevelOffset5, itmex2gapfillerOutputRfDetectedActualLevel, itmex2gapfillerOutputRfDetectedLowerLevelLimit, itmex2gapfillerOutputRfDetectedLowerLevelcontrol, itmex2gapfillerOutputRfDetectedHigherLevelLimit, itmex2gapfillerOutputRfDetectedHigherLevelcontrol, itmex2gapfillerOutputRfAlcControl, itmex2gapfillerOutputRfAlcSense, itmex2gapfillerOutputRfAlcSetpointPort1, itmex2gapfillerOutputRfAlcSetpointPort2, itmex2gapfillerOutputRfAlcMarkSetpoint1, itmex2gapfillerOutputRfAlcMarkSetpoint2, itmex2gapfillerOutputRfAlcStatus, itmex2gapfillerOutputRfAlcStatusInformation, itmex2gapfillerOutputMute, itmex2gapfillerOutputMuteReason, itmex2gapfillerOutputHpaStatus1Text, itmex2gapfillerOutputHpaStatus2Text, itmex2gapfillerOutputHpaStatus3Text, itmex2gapfillerOutputHpaStatus4Text, itmex2gapfillerOutputHpaStatus5Text, itmex2gapfillerOutputHpaStatus6Text, itmex2gapfillerOutputHpaStatus7Text, itmex2gapfillerOutputHpaStatus8Text, itmex2gapfillerOutputHpaStatus9Text, itmex2gapfillerOutputHpaStatus10Text, itmex2gapfillerOutputHpaStatus11Text, itmex2gapfillerOutputHpaStatus12Text, itmex2gapfillerOutputHpaStatus1Param, itmex2gapfillerOutputHpaStatus2Param, itmex2gapfillerOutputHpaStatus3Param, itmex2gapfillerOutputHpaStatus4Param, itmex2gapfillerOutputHpaStatus5Param, itmex2gapfillerOutputHpaStatus6Param, itmex2gapfillerOutputHpaStatus7Param, itmex2gapfillerOutputHpaStatus8Param, itmex2gapfillerOutputHpaStatus9Param, itmex2gapfillerOutputHpaStatus10Param, itmex2gapfillerOutputHpaStatus11Param, itmex2gapfillerOutputHpaStatus12Param, itmex2gapfillerOutputHpaAlarm1Text, itmex2gapfillerOutputHpaAlarm2Text, itmex2gapfillerOutputHpaAlarm3Text, itmex2gapfillerOutputHpaAlarm4Text, itmex2gapfillerOutputHpaAlarm5Text, itmex2gapfillerOutputHpaAlarm6Text, itmex2gapfillerOutputHpaAlarm7Text, itmex2gapfillerOutputHpaAlarm8Text, itmex2gapfillerOutputHpaAlarm9Text, itmex2gapfillerOutputHpaAlarm10Text, itmex2gapfillerOutputHpaAlarm11Text, itmex2gapfillerOutputHpaAlarm12Text, itmex2gapfillerOutputHpaAlarm1Status, itmex2gapfillerOutputHpaAlarm2Status, itmex2gapfillerOutputHpaAlarm3Status, itmex2gapfillerOutputHpaAlarm4Status, itmex2gapfillerOutputHpaAlarm5Status, itmex2gapfillerOutputHpaAlarm6Status, itmex2gapfillerOutputHpaAlarm7Status, itmex2gapfillerOutputHpaAlarm8Status, itmex2gapfillerOutputHpaAlarm9Status, itmex2gapfillerOutputHpaAlarm10Status, itmex2gapfillerOutputHpaAlarm11Status, itmex2gapfillerOutputHpaAlarm12Status, itmex2gapfillerOutputHpaPowerForward, itmex2gapfillerOutputHpaPowerReflected, itmex2gapfillerOutputHpaPowerHeatsinkTemp ,itmex2gapfillerOutputBandwidth, itmex2gapfillerOutputChannel, itmex2gapfillerOutputSynchronized, itmex2gapfillerOutputMute, itmex2gapfillerOutputPowerLevel } STATUS current DESCRIPTION "Output group" ::= { itmex2gapfillerGroups 4} itmex2gapfillerGpsGroup OBJECT-GROUP OBJECTS { itmex2gapfillerGpsInUse, itmex2gapfillerGpsMaintenance, itmex2gapfillerGpsBias, itmex2gapfillerGpsbiasVoltage , itmex2gapfillerGpsCableDelay , itmex2gapfillerGpsHoldoverForever, itmex2gapfillerGpsHoldoverTime, itmex2gapfillerGpsSatelliteSystemGPS, itmex2gapfillerGpsSatelliteSystemGLONASS, itmex2gapfillerGpsSatelliteSystemGALILEO, itmex2gapfillerGpsSatelliteSystemCOMPASS, itmex2gapfillerGpsVersion, itmex2gapfillerGps1PPSStatus, itmex2gapfillerGpsTime, itmex2gapfillerGpsState, itmex2gapfillerGpsVisibleSatellitesSnr, itmex2gapfillerGpsTrackedSatellitesSnr, itmex2gapfillerGpsVisibleSatellites, itmex2gapfillerGpsTrackedSatellites, itmex2gapfillerGpsLongtitude, itmex2gapfillerGpsLatitude, itmex2gapfillerGpsAltitude } STATUS current DESCRIPTION "GPS group" ::= { itmex2gapfillerGroups 7} itmex2gapfillerChannelFilterGroup OBJECT-GROUP OBJECTS { itmex2gapfillerChannelFiltersSelect } STATUS current DESCRIPTION "Channel Filter group" ::= { itmex2gapfillerGroups 8} itmex2gapfillerTestGroup OBJECT-GROUP OBJECTS { itmex2gapfillerTestEnable, itmex2gapfillerTestEnableReconnect, itmex2gapfillerTestscarrierFrequencyOffset } STATUS current DESCRIPTION "Test Signal group" ::= { itmex2gapfillerGroups 13} itmex2gapfillerAlarmGroup OBJECT-GROUP OBJECTS { itmex2gapfillerGroupAlarmDescription, itmex2gapfillerGroupAlarmState, itmex2gapfillerGroupAlarmActionEventlog, itmex2gapfillerGroupAlarmActionRelay1, itmex2gapfillerGroupAlarmActionRelay2, itmex2gapfillerGroupAlarmActionTrap, itmex2gapfillerGroupAlarmActionEmail, itmex2gapfillerGroupAlarmActionAlarmLED, itmex2gapfillerGroupAlarmActionForceMode, itmex2gapfillerPrimaryAlarmDescription, itmex2gapfillerPrimaryAlarmState, itmex2gapfillerPrimaryAlarmActionEventlog, itmex2gapfillerPrimaryAlarmActionRelay1, itmex2gapfillerPrimaryAlarmActionRelay2, itmex2gapfillerPrimaryAlarmActionTrap, itmex2gapfillerPrimaryAlarmActionEmail, itmex2gapfillerPrimaryAlarmActionAlarmLED, itmex2gapfillerPrimaryAlarmActionForceMode, itmex2gapfillerSecondaryAlarmDescription, itmex2gapfillerSecondaryAlarmState, itmex2gapfillerSecondaryAlarmActionEventlog, itmex2gapfillerSecondaryAlarmActionRelay1, itmex2gapfillerSecondaryAlarmActionRelay2, itmex2gapfillerSecondaryAlarmActionTrap, itmex2gapfillerSecondaryAlarmActionEmail, itmex2gapfillerSecondaryAlarmActionAlarmLED, itmex2gapfillerSecondaryAlarmActionForceMode, itmex2gapfillerSFNAlarmDescription, itmex2gapfillerSFNAlarmState, itmex2gapfillerSFNAlarmActionEventlog, itmex2gapfillerSFNAlarmActionRelay1, itmex2gapfillerSFNAlarmActionRelay2, itmex2gapfillerSFNAlarmActionTrap, itmex2gapfillerSFNAlarmActionEmail, itmex2gapfillerSFNAlarmActionAlarmLED, itmex2gapfillerSFNAlarmActionForceMode, itmex2gapfillerReferenceAlarmDescription, itmex2gapfillerReferenceAlarmState, itmex2gapfillerReferenceAlarmActionEventlog, itmex2gapfillerReferenceAlarmActionRelay1, itmex2gapfillerReferenceAlarmActionRelay2, itmex2gapfillerReferenceAlarmActionTrap, itmex2gapfillerReferenceAlarmActionEmail, itmex2gapfillerReferenceAlarmActionAlarmLED, itmex2gapfillerReferenceAlarmActionForceMode, itmex2gapfillerRFAlarmDescription, itmex2gapfillerRFAlarmState, itmex2gapfillerRFAlarmActionEventlog, itmex2gapfillerRFAlarmActionRelay1, itmex2gapfillerRFAlarmActionRelay2, itmex2gapfillerRFAlarmActionTrap, itmex2gapfillerRFAlarmActionEmail, itmex2gapfillerRFAlarmActionAlarmLED, itmex2gapfillerRFAlarmActionForceMode, itmex2gapfillerGPSAlarmDescription, itmex2gapfillerGPSAlarmState, itmex2gapfillerGPSAlarmActionEventlog, itmex2gapfillerGPSAlarmActionRelay1, itmex2gapfillerGPSAlarmActionRelay2, itmex2gapfillerGPSAlarmActionTrap, itmex2gapfillerGPSAlarmActionEmail, itmex2gapfillerGPSAlarmActionAlarmLED, itmex2gapfillerGPSAlarmActionForceMode, itmex2gapfillerExternalAlarmDescription, itmex2gapfillerExternalAlarmState, itmex2gapfillerExternalAlarmActionEventlog, itmex2gapfillerExternalAlarmActionRelay1, itmex2gapfillerExternalAlarmActionRelay2, itmex2gapfillerExternalAlarmActionTrap, itmex2gapfillerExternalAlarmActionEmail, itmex2gapfillerExternalAlarmActionAlarmLED, itmex2gapfillerExternalAlarmActionForceMode, itmex2gapfillerHWMonitorAlarmDescription, itmex2gapfillerHWMonitorAlarmState, itmex2gapfillerHWMonitorAlarmActionEventlog, itmex2gapfillerHWMonitorAlarmActionRelay1, itmex2gapfillerHWMonitorAlarmActionRelay2, itmex2gapfillerHWMonitorAlarmActionTrap, itmex2gapfillerHWMonitorAlarmActionEmail, itmex2gapfillerHWMonitorAlarmActionAlarmLED, itmex2gapfillerHWMonitorAlarmActionForceMode, itmex2gapfillerCommsAlarmDescription, itmex2gapfillerCommsAlarmState, itmex2gapfillerCommsAlarmActionEventlog, itmex2gapfillerCommsAlarmActionRelay1, itmex2gapfillerCommsAlarmActionRelay2, itmex2gapfillerCommsAlarmActionTrap, itmex2gapfillerCommsAlarmActionEmail, itmex2gapfillerCommsAlarmActionAlarmLED, itmex2gapfillerCommsAlarmActionForceMode, itmex2gapfillerInternalAlarmDescription, itmex2gapfillerInternalAlarmState, itmex2gapfillerInternalAlarmActionEventlog, itmex2gapfillerInternalAlarmActionRelay1, itmex2gapfillerInternalAlarmActionRelay2, itmex2gapfillerInternalAlarmActionTrap, itmex2gapfillerInternalAlarmActionEmail, itmex2gapfillerInternalAlarmActionAlarmLED, itmex2gapfillerInternalAlarmActionForceMode } STATUS current DESCRIPTION "Alarm group" ::= { itmex2gapfillerGroups 14} itmex2gapfillerPresetGroup OBJECT-GROUP OBJECTS { itmex2gapfillerPresetName, itmex2gapfillerPresetRecall, itmex2gapfillerPresetStore, itmex2gapfillerPresetLastRecalled } STATUS current DESCRIPTION "Preset group" ::= { itmex2gapfillerGroups 15} itmex2gapfillerEventlogGroup OBJECT-GROUP OBJECTS { itmex2gapfillerEventlogID, itmex2gapfillerEventlogTimestamp, itmex2gapfillerEventlogText, itmex2gapfillerEventlogClear, itmex2gapfillerEventlogEnable, itmex2gapfillerEventlogMode } STATUS current DESCRIPTION "Eventlog group" ::= { itmex2gapfillerGroups 16} itmex2gapfillerCommsGroup OBJECT-GROUP OBJECTS { itmex2gapfillerCommsAccessPasswordObserver, itmex2gapfillerCommsAccessPasswordOperator, itmex2gapfillerCommsAccessPasswordAdministrator, itmex2gapfillerCommsStaticRouteType, itmex2gapfillerCommsStaticRoutePrefix, itmex2gapfillerCommsStaticRoutePrefixSize, itmex2gapfillerCommsStaticRouteTarget, itmex2gapfillerCommsStaticRoutePhysicalInterface, itmex2gapfillerCommsAlarmEmailReceiver, itmex2gapfillerCommsNetworkWarnings, itmex2gapfillerCommsSeparatedSwitchPorts, itmex2gapfillerCommsBroadcastStormProtection, itmex2gapfillerCommsLocalPhysicalInterface, itmex2gapfillerCommsLocalDhcpMode, itmex2gapfillerCommsLocalStaticIpAddr, itmex2gapfillerCommsLocalStaticNetmask, itmex2gapfillerCommsLocalIpMulticastAddr, itmex2gapfillerCommsLocalIpMulticastSourceFilterMode, itmex2gapfillerCommsLocalIpMulticastSourceFilterAddress1, itmex2gapfillerCommsLocalIpMulticastSourceFilterAddress2, itmex2gapfillerCommsLocalIpMulticastSourceFilterAddress3, itmex2gapfillerCommsLocalIpMulticastSourceFilterAddress4, itmex2gapfillerCommsLocalIpMulticastSourceFilterAddress5, itmex2gapfillerCommsLocalIpMulticastSourceFilterAddress6, itmex2gapfillerCommsLocalVlanEnable, itmex2gapfillerCommsLocalVlanId, itmex2gapfillerCommsLocalServiceSNMP, itmex2gapfillerCommsLocalServiceSCPI, itmex2gapfillerCommsLocalServiceTSoIP, itmex2gapfillerCommsLocalServiceRIP, itmex2gapfillerCommsLocalCurrentIpAddr, itmex2gapfillerCommsLocalCurrentNetmask, itmex2gapfillerCommsRemoteEnable, itmex2gapfillerCommsRemotePhysicalInterface, itmex2gapfillerCommsRemoteDhcpMode, itmex2gapfillerCommsRemoteStaticIpAddr, itmex2gapfillerCommsRemoteStaticNetmask, itmex2gapfillerCommsRemoteIpMulticastAddr, itmex2gapfillerCommsRemoteIpMulticastSourceFilterMode, itmex2gapfillerCommsRemoteIpMulticastSourceFilterAddress1, itmex2gapfillerCommsRemoteIpMulticastSourceFilterAddress2, itmex2gapfillerCommsRemoteIpMulticastSourceFilterAddress3, itmex2gapfillerCommsRemoteIpMulticastSourceFilterAddress4, itmex2gapfillerCommsRemoteIpMulticastSourceFilterAddress5, itmex2gapfillerCommsRemoteIpMulticastSourceFilterAddress6, itmex2gapfillerCommsRemoteVlanEnable, itmex2gapfillerCommsRemoteVlanId, itmex2gapfillerCommsRemoteServiceSNMP, itmex2gapfillerCommsRemoteServiceSCPI, itmex2gapfillerCommsRemoteServiceTSoIP, itmex2gapfillerCommsRemoteServiceWeb, itmex2gapfillerCommsRemoteServiceRIP, itmex2gapfillerCommsRemoteCurrentIpAddr, itmex2gapfillerCommsRemoteCurrentNetmask, itmex2gapfillerCommsGbeAdminEnable, itmex2gapfillerCommsGbeAdminPhysicalInterface, itmex2gapfillerCommsGbeAdminDhcpMode, itmex2gapfillerCommsGbeAdminStaticIpAddr, itmex2gapfillerCommsGbeAdminStaticNetmask, itmex2gapfillerCommsGbeAdminIpMulticastAddr, itmex2gapfillerCommsGbeAdminIpMulticastSourceFilterMode, itmex2gapfillerCommsGbeAdminIpMulticastSourceFilterAddress1, itmex2gapfillerCommsGbeAdminIpMulticastSourceFilterAddress2, itmex2gapfillerCommsGbeAdminIpMulticastSourceFilterAddress3, itmex2gapfillerCommsGbeAdminIpMulticastSourceFilterAddress4, itmex2gapfillerCommsGbeAdminIpMulticastSourceFilterAddress5, itmex2gapfillerCommsGbeAdminIpMulticastSourceFilterAddress6, itmex2gapfillerCommsGbeAdminVlanEnable, itmex2gapfillerCommsGbeAdminVlanId, itmex2gapfillerCommsGbeAdminServiceSNMP, itmex2gapfillerCommsGbeAdminServiceSCPI, itmex2gapfillerCommsGbeAdminServiceTSoIP, itmex2gapfillerCommsGbeAdminServiceWeb, itmex2gapfillerCommsGbeAdminServiceRIP, itmex2gapfillerCommsGbeAdminCurrentIpAddr, itmex2gapfillerCommsGbeAdminCurrentNetmask, itmex2gapfillerCommsBackupEnable, itmex2gapfillerCommsBackupPhysicalInterface, itmex2gapfillerCommsBackupDhcpMode, itmex2gapfillerCommsBackupStaticIpAddr, itmex2gapfillerCommsBackupStaticNetmask, itmex2gapfillerCommsBackupIpMulticastAddr, itmex2gapfillerCommsBackupIpMulticastSourceFilterMode, itmex2gapfillerCommsBackupIpMulticastSourceFilterAddress1, itmex2gapfillerCommsBackupIpMulticastSourceFilterAddress2, itmex2gapfillerCommsBackupIpMulticastSourceFilterAddress3, itmex2gapfillerCommsBackupIpMulticastSourceFilterAddress4, itmex2gapfillerCommsBackupIpMulticastSourceFilterAddress5, itmex2gapfillerCommsBackupIpMulticastSourceFilterAddress6, itmex2gapfillerCommsBackupVlanEnable, itmex2gapfillerCommsBackupVlanId, itmex2gapfillerCommsBackupServiceSNMP, itmex2gapfillerCommsBackupServiceSCPI, itmex2gapfillerCommsBackupServiceTSoIP, itmex2gapfillerCommsBackupServiceWeb, itmex2gapfillerCommsBackupServiceRIP, itmex2gapfillerCommsBackupCurrentIpAddr, itmex2gapfillerCommsBackupCurrentNetmask, itmex2gapfillerCommsPortEnable, itmex2gapfillerCommsPortPhysicalInterface, itmex2gapfillerCommsPortDhcpMode, itmex2gapfillerCommsPortStaticIpAddr, itmex2gapfillerCommsPortStaticNetmask, itmex2gapfillerCommsPortIpMulticastAddr, itmex2gapfillerCommsPortIpMulticastSourceFilterMode, itmex2gapfillerCommsPortIpMulticastSourceFilterAddress1, itmex2gapfillerCommsPortIpMulticastSourceFilterAddress2, itmex2gapfillerCommsPortIpMulticastSourceFilterAddress3, itmex2gapfillerCommsPortIpMulticastSourceFilterAddress4, itmex2gapfillerCommsPortIpMulticastSourceFilterAddress5, itmex2gapfillerCommsPortIpMulticastSourceFilterAddress6, itmex2gapfillerCommsPortVlanEnable, itmex2gapfillerCommsPortVlanId, itmex2gapfillerCommsPortServiceSNMP, itmex2gapfillerCommsPortServiceSCPI, itmex2gapfillerCommsPortServiceTSoIP, itmex2gapfillerCommsPortServiceWeb, itmex2gapfillerCommsPortServiceRIP, itmex2gapfillerCommsPortCurrentIpAddr, itmex2gapfillerCommsPortCurrentNetmask, itmex2gapfillerCommsSNMPServicePort, itmex2gapfillerCommsSNMPReadOnlyCommunity, itmex2gapfillerCommsSNMPReadWriteCommunity, itmex2gapfillerCommsSNMPTrapCommunity, itmex2gapfillerCommsSNMPTrapDestination, itmex2gapfillerCommsSNMPTrapDestination2, itmex2gapfillerCommsSNMPTrapDestination3, itmex2gapfillerCommsSNMPTrapDestination4, itmex2gapfillerCommsSNMPTrapDestination5, itmex2gapfillerCommsSNMPTrapDestinationPort, itmex2gapfillerCommsSNMPTrapDestinationPort2, itmex2gapfillerCommsSNMPTrapDestinationPort3, itmex2gapfillerCommsSNMPTrapDestinationPort4, itmex2gapfillerCommsSNMPTrapDestinationPort5, itmex2gapfillerCommsStaticGateway, itmex2gapfillerCommsCurrentGateway, itmex2gapfillerCommsStaticHostname, itmex2gapfillerCommsCurrentHostname, itmex2gapfillerCommsStaticDNSDomain, itmex2gapfillerCommsCurrentDNSDomain, itmex2gapfillerCommsStaticDNS1ServerAddress, itmex2gapfillerCommsStaticDNS2ServerAddress, itmex2gapfillerCommsStaticDNS3ServerAddress, itmex2gapfillerCommsCurrentDNS1ServerAddress, itmex2gapfillerCommsCurrentDNS2ServerAddress, itmex2gapfillerCommsCurrentDNS3ServerAddress, itmex2gapfillerCommsStaticNtpServerAddress, itmex2gapfillerCommsStaticNtp2ServerAddress, itmex2gapfillerCommsStaticNtp3ServerAddress, itmex2gapfillerCommsCurrentNtpServerAddress, itmex2gapfillerCommsCurrentNtp2ServerAddress, itmex2gapfillerCommsCurrentNtp3ServerAddress, itmex2gapfillerCommsEmailServerAddress, itmex2gapfillerCommsSecureWebPort, itmex2gapfillerCommsWebProto, itmex2gapfillerCommsWebServicePort, itmex2gapfillerCommsSCPIServicePort, itmex2gapfillerCommsSCPIServerBaudrate, itmex2gapfillerCommsSCPIUartInterface, itmex2gapfillerCommsRipPort, itmex2gapfillerCommsIGMPVersion, itmex2gapfillerCommsIGMPQueryRobustnessCount, itmex2gapfillerCommsIGMPv3UnsolicitedReportInterval, itmex2gapfillerCommsIGMPv2UnsolicitedReportInterval, itmex2gapfillerCommsAccessAllowed, itmex2gapfillerCommsAccessAllowedTimeout, itmex2gapfillerCommsAccessAllowedTimeLeft, itmex2gapfillerCommsNtpStatusMessage, itmex2gapfillerCommsNtpStatusLeapsec, itmex2gapfillerCommsNtpStatusSource, itmex2gapfillerCommsNtpPeerRmsJitter, itmex2gapfillerCommsNtpPeerClockOffset, itmex2gapfillerCommsNtpPeerRoundtripDelay, itmex2gapfillerCommsNtpPeerDispertion, itmex2gapfillerCommsNtpLoopRmsJitter, itmex2gapfillerCommsNtpLoopClockOffset, itmex2gapfillerCommsNtpLoopRmsWander, itmex2gapfillerCommsNtpLoopFreqOff } STATUS current DESCRIPTION "Data network communications group" ::= { itmex2gapfillerGroups 17} itmex2gapfillerPrecorrectorGroup OBJECT-GROUP OBJECTS { itmex2gapfillerPrecorrectLastTurnAroundTime, itmex2gapfillerPrecorrectSecondsSinceLastUpdate, itmex2gapfillerPrecorrectLinearLoadNeutral, itmex2gapfillerPrecorrectLinearLoadFactory, itmex2gapfillerPrecorrectLinearUpdateFactoryCurve, itmex2gapfillerPrecorrectNonlinearLoadNeutral, itmex2gapfillerPrecorrectNonlinearLoadFactory, itmex2gapfillerPrecorrectNonlinearUpdateFactoryCurve, itmex2gapfillerPrecorrectVersionadaptive, itmex2gapfillerPrecorrectVersionoptipower, itmex2gapfillerPrecorrectHeadroom, itmex2gapfillerPrecorrectLinearAdaptive, itmex2gapfillerPrecorrectLinearMode, itmex2gapfillerPrecorrectLinearSenseEnable, itmex2gapfillerPrecorrectLinearMonitorStatus, itmex2gapfillerPrecorrectLinearMonitorSenseLevel, itmex2gapfillerPrecorrectLinearMonitorSenseValid, itmex2gapfillerPrecorrectLinearMonitorSenseBadCount, itmex2gapfillerPrecorrectLinearMonitorAmplitudeRipple, itmex2gapfillerPrecorrectLinearMonitorAmplitudeRippleValid, itmex2gapfillerPrecorrectLinearMonitorGroupDelay, itmex2gapfillerPrecorrectLinearMonitorGroupDelayValid, itmex2gapfillerPrecorrectLinearMonitorDiscartedIterations, itmex2gapfillerPrecorrectLinearMonitorIterations, itmex2gapfillerPrecorrectLinearAdapMode, itmex2gapfillerPrecorrectLinearAdapAmplitudeRippleTargetLevel, itmex2gapfillerPrecorrectLinearAdapAmplitudeRippleTargetHys, itmex2gapfillerPrecorrectLinearAdapAmplitudeRippleEnable, itmex2gapfillerPrecorrectLinearAdapGroupDelayTargetLevel, itmex2gapfillerPrecorrectLinearAdapGroupDelayTargetHys, itmex2gapfillerPrecorrectLinearAdapGroupDelayEnable, itmex2gapfillerPrecorrectLinearAdapPresetNeutralload, itmex2gapfillerPrecorrectLinearAdapPresetFactoryrecall, itmex2gapfillerPrecorrectLinearAdapPresetFactorystore, itmex2gapfillerPrecorrectLinearAdapPresetFactoryclear, itmex2gapfillerPrecorrectLinearAttenuation, itmex2gapfillerPrecorrectNonlinAdap, itmex2gapfillerPrecorrectNonlinMode, itmex2gapfillerPrecorrectNonlinSenseEnable, itmex2gapfillerPrecorrectNonlinMonitorStatus, itmex2gapfillerPrecorrectNonlinMonitorSenseLevel, itmex2gapfillerPrecorrectNonlinMonitorSenseValid, itmex2gapfillerPrecorrectNonlinMonitorSenseBadCount, itmex2gapfillerPrecorrectNonlinMonitorLowerShoulderLevel, itmex2gapfillerPrecorrectNonlinMonitorLowerShoulderValid, itmex2gapfillerPrecorrectNonlinMonitorUpperShoulderLevel, itmex2gapfillerPrecorrectNonlinMonitorUpperShoulderValid, itmex2gapfillerPrecorrectNonlinMonitorDiscartedIterations, itmex2gapfillerPrecorrectNonlinMonitorIterations, itmex2gapfillerPrecorrectNonlinMonitorMer, itmex2gapfillerPrecorrectNonlinMonitorMerValid, itmex2gapfillerPrecorrectNonlinMonitorPapr, itmex2gapfillerPrecorrectNonlinMonitorPaprValid, itmex2gapfillerPrecorrectNonlinAttenuation, itmex2gapfillerPrecorrectNonlinAdaptiveMode, itmex2gapfillerPrecorrectNonlinAdaptiveMaxRfPaprEnable, itmex2gapfillerPrecorrectNonlinAdaptiveMaxRfPaprLimit, itmex2gapfillerPrecorrectNonlinAdaptiveMerTarget, itmex2gapfillerPrecorrectNonlinAdaptiveMerTargetHys, itmex2gapfillerPrecorrectNonlinAdaptiveMerEnable, itmex2gapfillerPrecorrectNonlinAdaptiveLowerShoulderTargetLvl, itmex2gapfillerPrecorrectNonlinAdaptiveLowerShoulderTargetHys, itmex2gapfillerPrecorrectNonlinAdaptiveLowerShoulderEnable, itmex2gapfillerPrecorrectNonlinAdaptiveUpperShoulderTargetLvl, itmex2gapfillerPrecorrectNonlinAdaptiveUpperShoulderTargetHys, itmex2gapfillerPrecorrectNonlinAdaptiveUpperShoulderEnable, itmex2gapfillerPrecorrectNonlinAdaptivePresetNeutralload, itmex2gapfillerPrecorrectNonlinAdaptivePresetFactoryrecall, itmex2gapfillerPrecorrectNonlinAdaptivePresetFactorystore, itmex2gapfillerPrecorrectNonlinAdaptivePresetFactoryclear, itmex2gapfillerPrecorrectPaprClipping, itmex2gapfillerPrecorrectPaprShaping, itmex2gapfillerPrecorrectClipperMode, itmex2gapfillerPrecorrectClipperAdaptive, itmex2gapfillerPrecorrectClipperEnable, itmex2gapfillerPrecorrectClipperAdaptiveMode, itmex2gapfillerPrecorrectClipperAdaptiveShaping, itmex2gapfillerPrecorrectClipperPresetNeutralload, itmex2gapfillerPrecorrectClipperPresetFactoryrecall, itmex2gapfillerPrecorrectClipperPresetFactorystore, itmex2gapfillerPrecorrectClipperPresetFactoryclear, itmex2gapfillerPrecorrectClipperMonitorStatus, itmex2gapfillerPrecorrectClipperMonitorShoulderLevelLower, itmex2gapfillerPrecorrectClipperMonitorShoulderLevelLowerValid, itmex2gapfillerPrecorrectClipperMonitorShoulderLevelUpper, itmex2gapfillerPrecorrectClipperMonitorShoulderLevelUpperValid, itmex2gapfillerPrecorrectClipperMonitorMer, itmex2gapfillerPrecorrectClipperMonitorMerValid, itmex2gapfillerPrecorrectClipperMonitorPapr, itmex2gapfillerPrecorrectClipperMonitorPaprValid, itmex2gapfillerPrecorrectClipperMonitorIterations } STATUS current DESCRIPTION "Precorrector group" ::= { itmex2gapfillerGroups 25} itmex2gapfillerReceptionGroup OBJECT-GROUP OBJECTS { itmex2gapfillerReceptionRepeaterMode, itmex2gapfillerReceptionEcSenseLevel, itmex2gapfillerReceptionEcLoopGain, itmex2gapfillerReceptionEcSuppression, itmex2gapfillerReceptionEcLGlimit, itmex2gapfillerReceptionEcSenseSelect, itmex2gapfillerReceptionEcholist0Time, itmex2gapfillerReceptionEcholist1Time, itmex2gapfillerReceptionEcholist2Time, itmex2gapfillerReceptionEcholist3Time, itmex2gapfillerReceptionEcholist4Time, itmex2gapfillerReceptionEcholist5Time, itmex2gapfillerReceptionEcholist6Time, itmex2gapfillerReceptionEcholist7Time, itmex2gapfillerReceptionEcholist8Time, itmex2gapfillerReceptionEcholist9Time, itmex2gapfillerReceptionEcholist0Suppression, itmex2gapfillerReceptionEcholist1Suppression, itmex2gapfillerReceptionEcholist2Suppression, itmex2gapfillerReceptionEcholist3Suppression, itmex2gapfillerReceptionEcholist4Suppression, itmex2gapfillerReceptionEcholist5Suppression, itmex2gapfillerReceptionEcholist6Suppression, itmex2gapfillerReceptionEcholist7Suppression, itmex2gapfillerReceptionEcholist8Suppression, itmex2gapfillerReceptionEcholist9Suppression, itmex2gapfillerReceptionGainControl, itmex2gapfillerReceptionAGCMode, itmex2gapfillerReceptionBandwidth, itmex2gapfillerReceptionRFFrequency, itmex2gapfillerReceptionRFFrequencyOffset, itmex2gapfillerReceptionRFPolarity, itmex2gapfillerReceptionRFSquelchEnable, itmex2gapfillerReceptionRFSquelchThreshold, itmex2gapfillerReceptionRFSquelchHysteresis, itmex2gapfillerReceptionRFTrackingFilterEnable, itmex2gapfillerReceptionRFInputLevel, itmex2gapfillerReceptionRFInputLevelThreshold, itmex2gapfillerReceptionRFInputLevelHysteresis, itmex2gapfillerReceptionTunerHWVersion, itmex2gapfillerReceptionTunerHWType, itmex2gapfillerReceptionTunerHWID, itmex2gapfillerReceptionTunerHWSerialNumber, itmex2gapfillerReceptionTunerHWCalibrationDate, itmex2gapfillerReceptionTunerHWCalibrationDataVersion, itmex2gapfillerReceptionTunerHWCalibrationSWVersion, itmex2gapfillerReceptionTunerSWVersion } STATUS current DESCRIPTION "Reception group" ::= { itmex2gapfillerGroups 26} itmex2gapfillerBackplaneGroup OBJECT-GROUP OBJECTS { itmex2gapfillerBackplanePolarityHardMute, itmex2gapfillerBackplanePolarityRFFail } STATUS current DESCRIPTION "Backplane group" ::= { itmex2gapfillerGroups 27} itmex2gapfillerNotifsGroup OBJECT-GROUP OBJECTS { itmex2gapfillerNotifMessage, itmex2gapfillerNotifState, itmex2gapfillerNotifLocalTime } STATUS current DESCRIPTION "Notification objects group" ::= { itmex2gapfillerGroups 64 } -- -- Agent Capability -- itmex2gapfillerAgent AGENT-CAPABILITIES PRODUCT-RELEASE "SWITELCOGAPFILLER_P3_1_02_358 build 1615722157" STATUS current DESCRIPTION "Itelco MEX2 GAPFILLER Modulator agent" SUPPORTS ITMEX2GAPFILLER-MIB INCLUDES { itmex2gapfillerSystemGroup, itmex2gapfillerGpsGroup, itmex2gapfillerTestGroup, itmex2gapfillerPresetGroup, itmex2gapfillerEventlogGroup, itmex2gapfillerCommsGroup, itmex2gapfillerBackplaneGroup, itmex2gapfillerReceptionGroup, itmex2gapfillerAlarmGroup } ::= { itmex2gapfillerConformance 3 } -- -- System Notifications (aka Traps) -- itmex2gapfillerNotificationsGroups OBJECT IDENTIFIER ::= { itmex2gapfillerConformance 4 } itmex2gapfillerNotifModulatorAlarm NOTIFICATION-TYPE OBJECTS { itmex2gapfillerNotifMessage, itmex2gapfillerNotifState, itmex2gapfillerNotifLocalTime } STATUS current DESCRIPTION "Modulator Alarms" ::= { itmex2gapfillerNotif 3 } itmex2gapfillerNotifTSPrimaryAlarm NOTIFICATION-TYPE OBJECTS { itmex2gapfillerNotifMessage, itmex2gapfillerNotifState, itmex2gapfillerNotifLocalTime } STATUS current DESCRIPTION "ASI TS Primary Alarms" ::= { itmex2gapfillerNotif 5 } itmex2gapfillerNotifTSSecondaryAlarm NOTIFICATION-TYPE OBJECTS { itmex2gapfillerNotifMessage, itmex2gapfillerNotifState, itmex2gapfillerNotifLocalTime } STATUS current DESCRIPTION "ASI TS Secondary Alarms" ::= { itmex2gapfillerNotif 6 } itmex2gapfillerNotifSFNAlarm NOTIFICATION-TYPE OBJECTS { itmex2gapfillerNotifMessage, itmex2gapfillerNotifState, itmex2gapfillerNotifLocalTime } STATUS current DESCRIPTION "SFN Alarms" ::= { itmex2gapfillerNotif 7 } itmex2gapfillerNotifRefenceClockAlarm NOTIFICATION-TYPE OBJECTS { itmex2gapfillerNotifMessage, itmex2gapfillerNotifState, itmex2gapfillerNotifLocalTime } STATUS current DESCRIPTION "Reference Alarms" ::= { itmex2gapfillerNotif 8 } itmex2gapfillerNotifRFAlarm NOTIFICATION-TYPE OBJECTS { itmex2gapfillerNotifMessage, itmex2gapfillerNotifState, itmex2gapfillerNotifLocalTime } STATUS current DESCRIPTION "RF Alarms" ::= { itmex2gapfillerNotif 9 } itmex2gapfillerNotifGNSSAlarm NOTIFICATION-TYPE OBJECTS { itmex2gapfillerNotifMessage, itmex2gapfillerNotifState, itmex2gapfillerNotifLocalTime } STATUS current DESCRIPTION "GNSS Alarms" ::= { itmex2gapfillerNotif 10 } itmex2gapfillerNotifTSoIPAlarm NOTIFICATION-TYPE OBJECTS { itmex2gapfillerNotifMessage, itmex2gapfillerNotifState, itmex2gapfillerNotifLocalTime } STATUS current DESCRIPTION "TSoIP Alarms" ::= { itmex2gapfillerNotif 12 } itmex2gapfillerNotifExternalAlarm NOTIFICATION-TYPE OBJECTS { itmex2gapfillerNotifMessage, itmex2gapfillerNotifState, itmex2gapfillerNotifLocalTime } STATUS current DESCRIPTION "External Alarms" ::= { itmex2gapfillerNotif 13 } itmex2gapfillerNotifHWMonitorAlarm NOTIFICATION-TYPE OBJECTS { itmex2gapfillerNotifMessage, itmex2gapfillerNotifState, itmex2gapfillerNotifLocalTime } STATUS current DESCRIPTION "HW Monitor Alarms" ::= { itmex2gapfillerNotif 14 } itmex2gapfillerNotifCommAlarm NOTIFICATION-TYPE OBJECTS { itmex2gapfillerNotifMessage, itmex2gapfillerNotifState, itmex2gapfillerNotifLocalTime } STATUS current DESCRIPTION "Communications Alarms" ::= { itmex2gapfillerNotif 15 } itmex2gapfillerNotifASIAlarm NOTIFICATION-TYPE OBJECTS { itmex2gapfillerNotifMessage, itmex2gapfillerNotifState, itmex2gapfillerNotifLocalTime } STATUS current DESCRIPTION "ASI Alarms" ::= { itmex2gapfillerNotif 16 } itmex2gapfillerNotifInternalAlarm NOTIFICATION-TYPE OBJECTS { itmex2gapfillerNotifMessage, itmex2gapfillerNotifState, itmex2gapfillerNotifLocalTime } STATUS current DESCRIPTION "Internal Alarms" ::= { itmex2gapfillerNotif 18 } itmex2gapfillerNotifTSPrimarySyncLossAlarm NOTIFICATION-TYPE OBJECTS { itmex2gapfillerNotifMessage, itmex2gapfillerNotifState, itmex2gapfillerNotifLocalTime } STATUS current DESCRIPTION "TS Primary Sync Loss" ::= { itmex2gapfillerNotif 21 } itmex2gapfillerNotifTSSecondarySyncLossAlarm NOTIFICATION-TYPE OBJECTS { itmex2gapfillerNotifMessage, itmex2gapfillerNotifState, itmex2gapfillerNotifLocalTime } STATUS current DESCRIPTION "TS Secondary Sync Loss" ::= { itmex2gapfillerNotif 32 } itmex2gapfillerNotifRFRFSquelchAlarm NOTIFICATION-TYPE OBJECTS { itmex2gapfillerNotifMessage, itmex2gapfillerNotifState, itmex2gapfillerNotifLocalTime } STATUS current DESCRIPTION "RF Input Squelch" ::= { itmex2gapfillerNotif 43 } itmex2gapfillerNotifRFOverloadProtectionAlarm NOTIFICATION-TYPE OBJECTS { itmex2gapfillerNotifMessage, itmex2gapfillerNotifState, itmex2gapfillerNotifLocalTime } STATUS current DESCRIPTION "Overload Protection" ::= { itmex2gapfillerNotif 44 } itmex2gapfillerNotifRFInputLevelAlarm NOTIFICATION-TYPE OBJECTS { itmex2gapfillerNotifMessage, itmex2gapfillerNotifState, itmex2gapfillerNotifLocalTime } STATUS current DESCRIPTION "RF Input Level" ::= { itmex2gapfillerNotif 46 } itmex2gapfillerNotifCommeth0Alarm NOTIFICATION-TYPE OBJECTS { itmex2gapfillerNotifMessage, itmex2gapfillerNotifState, itmex2gapfillerNotifLocalTime } STATUS current DESCRIPTION "ETH0 Conn. State" ::= { itmex2gapfillerNotif 55 } itmex2gapfillerNotifCommeth1Alarm NOTIFICATION-TYPE OBJECTS { itmex2gapfillerNotifMessage, itmex2gapfillerNotifState, itmex2gapfillerNotifLocalTime } STATUS current DESCRIPTION "ETH1 Conn. State" ::= { itmex2gapfillerNotif 56 } itmex2gapfillerNotifCommeth2Alarm NOTIFICATION-TYPE OBJECTS { itmex2gapfillerNotifMessage, itmex2gapfillerNotifState, itmex2gapfillerNotifLocalTime } STATUS current DESCRIPTION "ETH2 Conn. State" ::= { itmex2gapfillerNotif 57 } itmex2gapfillerNotifCommeth3Alarm NOTIFICATION-TYPE OBJECTS { itmex2gapfillerNotifMessage, itmex2gapfillerNotifState, itmex2gapfillerNotifLocalTime } STATUS current DESCRIPTION "ETH3 Conn. State" ::= { itmex2gapfillerNotif 58 } itmex2gapfillerNotifCommeth4Alarm NOTIFICATION-TYPE OBJECTS { itmex2gapfillerNotifMessage, itmex2gapfillerNotifState, itmex2gapfillerNotifLocalTime } STATUS current DESCRIPTION "ETH4 Conn. State" ::= { itmex2gapfillerNotif 59 } itmex2gapfillerNotifExternalHpa-refAlarm NOTIFICATION-TYPE OBJECTS { itmex2gapfillerNotifMessage, itmex2gapfillerNotifState, itmex2gapfillerNotifLocalTime } STATUS current DESCRIPTION "HPA Reflected" ::= { itmex2gapfillerNotif 72 } itmex2gapfillerNotifExternalHpa-absAlarm NOTIFICATION-TYPE OBJECTS { itmex2gapfillerNotifMessage, itmex2gapfillerNotifState, itmex2gapfillerNotifLocalTime } STATUS current DESCRIPTION "HPA RF ABSENT" ::= { itmex2gapfillerNotif 73 } itmex2gapfillerNotifExternalHpa-warnAlarm NOTIFICATION-TYPE OBJECTS { itmex2gapfillerNotifMessage, itmex2gapfillerNotifState, itmex2gapfillerNotifLocalTime } STATUS current DESCRIPTION "HPA Warning" ::= { itmex2gapfillerNotif 74 } itmex2gapfillerNotifExternalHpa-faultAlarm NOTIFICATION-TYPE OBJECTS { itmex2gapfillerNotifMessage, itmex2gapfillerNotifState, itmex2gapfillerNotifLocalTime } STATUS current DESCRIPTION "HPA Fault" ::= { itmex2gapfillerNotif 75 } itmex2gapfillerNotifRefenceClockExtern1PPSLossAlarm NOTIFICATION-TYPE OBJECTS { itmex2gapfillerNotifMessage, itmex2gapfillerNotifState, itmex2gapfillerNotifLocalTime } STATUS current DESCRIPTION "Ext. 1PPS Loss" ::= { itmex2gapfillerNotif 76 } itmex2gapfillerNotifRefenceClockIntern1PPSLossAlarm NOTIFICATION-TYPE OBJECTS { itmex2gapfillerNotifMessage, itmex2gapfillerNotifState, itmex2gapfillerNotifLocalTime } STATUS current DESCRIPTION "Int. 10MHz Loss" ::= { itmex2gapfillerNotif 77 } itmex2gapfillerNotifRefenceClockExtern10MHzLossAlarm NOTIFICATION-TYPE OBJECTS { itmex2gapfillerNotifMessage, itmex2gapfillerNotifState, itmex2gapfillerNotifLocalTime } STATUS current DESCRIPTION "Ext. 10MHz Loss" ::= { itmex2gapfillerNotif 78 } itmex2gapfillerNotifRFAlcRangeAlarm NOTIFICATION-TYPE OBJECTS { itmex2gapfillerNotifMessage, itmex2gapfillerNotifState, itmex2gapfillerNotifLocalTime } STATUS current DESCRIPTION "ALC Range" ::= { itmex2gapfillerNotif 79 } itmex2gapfillerNotifRFLevelOutOfRangeAlarm NOTIFICATION-TYPE OBJECTS { itmex2gapfillerNotifMessage, itmex2gapfillerNotifState, itmex2gapfillerNotifLocalTime } STATUS current DESCRIPTION "RF Level Out of Range" ::= { itmex2gapfillerNotif 87 } itmex2gapfillerNotifRefenceClockNTPSyncLossAlarm NOTIFICATION-TYPE OBJECTS { itmex2gapfillerNotifMessage, itmex2gapfillerNotifState, itmex2gapfillerNotifLocalTime } STATUS current DESCRIPTION "NTP Sync Loss" ::= { itmex2gapfillerNotif 89 } itmex2gapfillerNotifGNSSUnlockedAlarm NOTIFICATION-TYPE OBJECTS { itmex2gapfillerNotifMessage, itmex2gapfillerNotifState, itmex2gapfillerNotifLocalTime } STATUS current DESCRIPTION "GNSS Unlocked" ::= { itmex2gapfillerNotif 98 } itmex2gapfillerNotifGNSSAntennaFaultAlarm NOTIFICATION-TYPE OBJECTS { itmex2gapfillerNotifMessage, itmex2gapfillerNotifState, itmex2gapfillerNotifLocalTime } STATUS current DESCRIPTION "GNSS Antenna Fault" ::= { itmex2gapfillerNotif 107 } itmex2gapfillerNotifGNSSHoldOverAlarm NOTIFICATION-TYPE OBJECTS { itmex2gapfillerNotifMessage, itmex2gapfillerNotifState, itmex2gapfillerNotifLocalTime } STATUS current DESCRIPTION "GNSS Holdover" ::= { itmex2gapfillerNotif 108 } itmex2gapfillerNotifRefenceClockExternal10MHzHoldOverAlarm NOTIFICATION-TYPE OBJECTS { itmex2gapfillerNotifMessage, itmex2gapfillerNotifState, itmex2gapfillerNotifLocalTime } STATUS current DESCRIPTION "Ext. 10MHz Ref Holdover" ::= { itmex2gapfillerNotif 109 } itmex2gapfillerNotifRefenceClockExternal1PPSHoldOverAlarm NOTIFICATION-TYPE OBJECTS { itmex2gapfillerNotifMessage, itmex2gapfillerNotifState, itmex2gapfillerNotifLocalTime } STATUS current DESCRIPTION "Ext. 1PPS Ref Holdover" ::= { itmex2gapfillerNotif 110 } itmex2gapfillerNotifInternalBackplaneAlarm NOTIFICATION-TYPE OBJECTS { itmex2gapfillerNotifMessage, itmex2gapfillerNotifState, itmex2gapfillerNotifLocalTime } STATUS current DESCRIPTION "Backplane Status" ::= { itmex2gapfillerNotif 129 } itmex2gapfillerNotifInternalReferenceClockAlarm NOTIFICATION-TYPE OBJECTS { itmex2gapfillerNotifMessage, itmex2gapfillerNotifState, itmex2gapfillerNotifLocalTime } STATUS current DESCRIPTION "Reference Status" ::= { itmex2gapfillerNotif 132 } itmex2gapfillerNotifInternalUpConverterAlarm NOTIFICATION-TYPE OBJECTS { itmex2gapfillerNotifMessage, itmex2gapfillerNotifState, itmex2gapfillerNotifLocalTime } STATUS current DESCRIPTION "Upconverter Status" ::= { itmex2gapfillerNotif 134 } itmex2gapfillerNotifInternalDownConverterAlarm NOTIFICATION-TYPE OBJECTS { itmex2gapfillerNotifMessage, itmex2gapfillerNotifState, itmex2gapfillerNotifLocalTime } STATUS current DESCRIPTION "Downconverter Status" ::= { itmex2gapfillerNotif 135 } itmex2gapfillerNotifInternalMainboardAlarm NOTIFICATION-TYPE OBJECTS { itmex2gapfillerNotifMessage, itmex2gapfillerNotifState, itmex2gapfillerNotifLocalTime } STATUS current DESCRIPTION "Main board Status" ::= { itmex2gapfillerNotif 136 } itmex2gapfillerNotifInternalBatteryAlarm NOTIFICATION-TYPE OBJECTS { itmex2gapfillerNotifMessage, itmex2gapfillerNotifState, itmex2gapfillerNotifLocalTime } STATUS current DESCRIPTION "Main Board Battery" ::= { itmex2gapfillerNotif 137 } itmex2gapfillerNotifInternalFirmware1Alarm NOTIFICATION-TYPE OBJECTS { itmex2gapfillerNotifMessage, itmex2gapfillerNotifState, itmex2gapfillerNotifLocalTime } STATUS current DESCRIPTION "Firmware 1 Status" ::= { itmex2gapfillerNotif 139 } itmex2gapfillerNotifInternalGNSSAlarm NOTIFICATION-TYPE OBJECTS { itmex2gapfillerNotifMessage, itmex2gapfillerNotifState, itmex2gapfillerNotifLocalTime } STATUS current DESCRIPTION "GNSS Status" ::= { itmex2gapfillerNotif 142 } itmex2gapfillerNotifInternalSatelliteAlarm NOTIFICATION-TYPE OBJECTS { itmex2gapfillerNotifMessage, itmex2gapfillerNotifState, itmex2gapfillerNotifLocalTime } STATUS current DESCRIPTION "Satrecv Status" ::= { itmex2gapfillerNotif 143 } itmex2gapfillerNotifInternalEthAlarm NOTIFICATION-TYPE OBJECTS { itmex2gapfillerNotifMessage, itmex2gapfillerNotifState, itmex2gapfillerNotifLocalTime } STATUS current DESCRIPTION "EtherNet Port Failure" ::= { itmex2gapfillerNotif 146 } itmex2gapfillerNotifHWMonitorFPGAAlarm NOTIFICATION-TYPE OBJECTS { itmex2gapfillerNotifMessage, itmex2gapfillerNotifState, itmex2gapfillerNotifLocalTime } STATUS current DESCRIPTION "Main Board FPGA Temperature" ::= { itmex2gapfillerNotif 156 } itmex2gapfillerNotifHWMonitorMainBoardCPUTemperatureAlarm NOTIFICATION-TYPE OBJECTS { itmex2gapfillerNotifMessage, itmex2gapfillerNotifState, itmex2gapfillerNotifLocalTime } STATUS current DESCRIPTION "Main Board CPU Temperature" ::= { itmex2gapfillerNotif 157 } itmex2gapfillerNotifHWMonitorMainBoardTemperatureAlarm NOTIFICATION-TYPE OBJECTS { itmex2gapfillerNotifMessage, itmex2gapfillerNotifState, itmex2gapfillerNotifLocalTime } STATUS current DESCRIPTION "Main Board Temperature" ::= { itmex2gapfillerNotif 158 } itmex2gapfillerNotifHWMonitorLeftFanAlarm NOTIFICATION-TYPE OBJECTS { itmex2gapfillerNotifMessage, itmex2gapfillerNotifState, itmex2gapfillerNotifLocalTime } STATUS current DESCRIPTION "Left Chassis Fan" ::= { itmex2gapfillerNotif 159 } itmex2gapfillerNotifHWMonitorRightFan2Alarm NOTIFICATION-TYPE OBJECTS { itmex2gapfillerNotifMessage, itmex2gapfillerNotifState, itmex2gapfillerNotifLocalTime } STATUS current DESCRIPTION "Right Chassis Fan" ::= { itmex2gapfillerNotif 160 } itmex2gapfillerNotifHWMonitorBackplaneTemperatureAlarm NOTIFICATION-TYPE OBJECTS { itmex2gapfillerNotifMessage, itmex2gapfillerNotifState, itmex2gapfillerNotifLocalTime } STATUS current DESCRIPTION "Backplane Temperature" ::= { itmex2gapfillerNotif 162 } itmex2gapfillerNotifInternalPLLUnlockedAlarm NOTIFICATION-TYPE OBJECTS { itmex2gapfillerNotifMessage, itmex2gapfillerNotifState, itmex2gapfillerNotifLocalTime } STATUS current DESCRIPTION "PLL Out of Lock" ::= { itmex2gapfillerNotif 182 } itmex2gapfillerNotifExternalInput5Alarm NOTIFICATION-TYPE OBJECTS { itmex2gapfillerNotifMessage, itmex2gapfillerNotifState, itmex2gapfillerNotifLocalTime } STATUS current DESCRIPTION "Alarm Input 5" ::= { itmex2gapfillerNotif 183 } itmex2gapfillerNotifExternalInput6Alarm NOTIFICATION-TYPE OBJECTS { itmex2gapfillerNotifMessage, itmex2gapfillerNotifState, itmex2gapfillerNotifLocalTime } STATUS current DESCRIPTION "Alarm Input 6" ::= { itmex2gapfillerNotif 186 } itmex2gapfillerNotifExternalInput7Alarm NOTIFICATION-TYPE OBJECTS { itmex2gapfillerNotifMessage, itmex2gapfillerNotifState, itmex2gapfillerNotifLocalTime } STATUS current DESCRIPTION "Alarm Input 7" ::= { itmex2gapfillerNotif 187 } itmex2gapfillerNotifExternalInput8Alarm NOTIFICATION-TYPE OBJECTS { itmex2gapfillerNotifMessage, itmex2gapfillerNotifState, itmex2gapfillerNotifLocalTime } STATUS current DESCRIPTION "Alarm Input 8" ::= { itmex2gapfillerNotif 188 } itmex2gapfillerNotifInternalCalibrationAlarm NOTIFICATION-TYPE OBJECTS { itmex2gapfillerNotifMessage, itmex2gapfillerNotifState, itmex2gapfillerNotifLocalTime } STATUS current DESCRIPTION "Calibration Data" ::= { itmex2gapfillerNotif 198 } itmex2gapfillerNotifCommnetconfAlarm NOTIFICATION-TYPE OBJECTS { itmex2gapfillerNotifMessage, itmex2gapfillerNotifState, itmex2gapfillerNotifLocalTime } STATUS current DESCRIPTION "Network Configuration" ::= { itmex2gapfillerNotif 199 } itmex2gapfillerNotifGroupModulatorAlarm NOTIFICATION-GROUP NOTIFICATIONS { itmex2gapfillerNotifModulatorAlarm } STATUS current DESCRIPTION "Modulator Alarms" ::= { itmex2gapfillerNotificationsGroups 3 } itmex2gapfillerNotifGroupTSPrimaryAlarm NOTIFICATION-GROUP NOTIFICATIONS { itmex2gapfillerNotifTSPrimaryAlarm, itmex2gapfillerNotifTSPrimarySyncLossAlarm } STATUS current DESCRIPTION "ASI TS Primary Alarms" ::= { itmex2gapfillerNotificationsGroups 5 } itmex2gapfillerNotifGroupTSSecondaryAlarm NOTIFICATION-GROUP NOTIFICATIONS { itmex2gapfillerNotifTSSecondaryAlarm, itmex2gapfillerNotifTSSecondarySyncLossAlarm } STATUS current DESCRIPTION "ASI TS Secondary Alarms" ::= { itmex2gapfillerNotificationsGroups 6 } itmex2gapfillerNotifGroupSFNAlarm NOTIFICATION-GROUP NOTIFICATIONS { itmex2gapfillerNotifSFNAlarm } STATUS current DESCRIPTION "SFN Alarms" ::= { itmex2gapfillerNotificationsGroups 7 } itmex2gapfillerNotifGroupRefenceClockAlarm NOTIFICATION-GROUP NOTIFICATIONS { itmex2gapfillerNotifRefenceClockAlarm, itmex2gapfillerNotifRefenceClockExtern1PPSLossAlarm, itmex2gapfillerNotifRefenceClockIntern1PPSLossAlarm, itmex2gapfillerNotifRefenceClockExtern10MHzLossAlarm, itmex2gapfillerNotifRefenceClockNTPSyncLossAlarm, itmex2gapfillerNotifRefenceClockExternal10MHzHoldOverAlarm, itmex2gapfillerNotifRefenceClockExternal1PPSHoldOverAlarm } STATUS current DESCRIPTION "Reference Alarms" ::= { itmex2gapfillerNotificationsGroups 8 } itmex2gapfillerNotifGroupRFAlarm NOTIFICATION-GROUP NOTIFICATIONS { itmex2gapfillerNotifRFAlarm, itmex2gapfillerNotifRFRFSquelchAlarm, itmex2gapfillerNotifRFOverloadProtectionAlarm, itmex2gapfillerNotifRFInputLevelAlarm, itmex2gapfillerNotifRFAlcRangeAlarm, itmex2gapfillerNotifRFLevelOutOfRangeAlarm } STATUS current DESCRIPTION "RF Alarms" ::= { itmex2gapfillerNotificationsGroups 9 } itmex2gapfillerNotifGroupGNSSAlarm NOTIFICATION-GROUP NOTIFICATIONS { itmex2gapfillerNotifGNSSAlarm, itmex2gapfillerNotifGNSSUnlockedAlarm, itmex2gapfillerNotifGNSSAntennaFaultAlarm, itmex2gapfillerNotifGNSSHoldOverAlarm } STATUS current DESCRIPTION "GNSS Alarms" ::= { itmex2gapfillerNotificationsGroups 10 } itmex2gapfillerNotifGroupTSoIPAlarm NOTIFICATION-GROUP NOTIFICATIONS { itmex2gapfillerNotifTSoIPAlarm } STATUS current DESCRIPTION "TSoIP Alarms" ::= { itmex2gapfillerNotificationsGroups 12 } itmex2gapfillerNotifGroupExternalAlarm NOTIFICATION-GROUP NOTIFICATIONS { itmex2gapfillerNotifExternalAlarm, itmex2gapfillerNotifExternalHpa-refAlarm, itmex2gapfillerNotifExternalHpa-absAlarm, itmex2gapfillerNotifExternalHpa-warnAlarm, itmex2gapfillerNotifExternalHpa-faultAlarm, itmex2gapfillerNotifExternalInput5Alarm, itmex2gapfillerNotifExternalInput6Alarm, itmex2gapfillerNotifExternalInput7Alarm, itmex2gapfillerNotifExternalInput8Alarm } STATUS current DESCRIPTION "External Alarms" ::= { itmex2gapfillerNotificationsGroups 13 } itmex2gapfillerNotifGroupHWMonitorAlarm NOTIFICATION-GROUP NOTIFICATIONS { itmex2gapfillerNotifHWMonitorAlarm, itmex2gapfillerNotifHWMonitorFPGAAlarm, itmex2gapfillerNotifHWMonitorMainBoardCPUTemperatureAlarm, itmex2gapfillerNotifHWMonitorMainBoardTemperatureAlarm, itmex2gapfillerNotifHWMonitorLeftFanAlarm, itmex2gapfillerNotifHWMonitorRightFan2Alarm, itmex2gapfillerNotifHWMonitorBackplaneTemperatureAlarm } STATUS current DESCRIPTION "HW Monitor Alarms" ::= { itmex2gapfillerNotificationsGroups 14 } itmex2gapfillerNotifGroupCommAlarm NOTIFICATION-GROUP NOTIFICATIONS { itmex2gapfillerNotifCommAlarm, itmex2gapfillerNotifCommeth0Alarm, itmex2gapfillerNotifCommeth1Alarm, itmex2gapfillerNotifCommeth2Alarm, itmex2gapfillerNotifCommeth3Alarm, itmex2gapfillerNotifCommeth4Alarm, itmex2gapfillerNotifCommnetconfAlarm } STATUS current DESCRIPTION "Communications Alarms" ::= { itmex2gapfillerNotificationsGroups 15 } itmex2gapfillerNotifGroupASIAlarm NOTIFICATION-GROUP NOTIFICATIONS { itmex2gapfillerNotifASIAlarm } STATUS current DESCRIPTION "ASI Alarms" ::= { itmex2gapfillerNotificationsGroups 16 } itmex2gapfillerNotifGroupInternalAlarm NOTIFICATION-GROUP NOTIFICATIONS { itmex2gapfillerNotifInternalAlarm, itmex2gapfillerNotifInternalBackplaneAlarm, itmex2gapfillerNotifInternalReferenceClockAlarm, itmex2gapfillerNotifInternalUpConverterAlarm, itmex2gapfillerNotifInternalDownConverterAlarm, itmex2gapfillerNotifInternalMainboardAlarm, itmex2gapfillerNotifInternalBatteryAlarm, itmex2gapfillerNotifInternalFirmware1Alarm, itmex2gapfillerNotifInternalGNSSAlarm, itmex2gapfillerNotifInternalSatelliteAlarm, itmex2gapfillerNotifInternalEthAlarm, itmex2gapfillerNotifInternalPLLUnlockedAlarm, itmex2gapfillerNotifInternalCalibrationAlarm } STATUS current DESCRIPTION "Internal Alarms" ::= { itmex2gapfillerNotificationsGroups 18 } END