Why do I get a screen over load on my FM-T or FMi-T TX with less than 100 Volts of screen Voltage? : Broadcast Electronics

We will be closed for the holidays on December 24th and 25th, and again from December 31st through January 5th.

Regular hours will resume on Monday January 6th.

During this time, Emergency Technical Support will be available according to our after hours policies.

Why do I get a screen over load on my FM-T or FMi-T TX with less than 100 Volts of screen Voltage? Print

Modified on: Tue, 8 Oct, 2019 at 1:08 PM

Most likely issue is that one of the neutralization capacitors (C7, C8, C17, or C18) are shorting under low screen voltage.

Remove the neutralization straps one at a time to locate the shorted capacitor. Then contact our Parts department ([email protected]) to order part number 519-0037.

Did you find it helpful? Yes No

We will be closed for the holidays on December 24th and 25th, and again from December 31st through January 5th.

Regular hours will resume on Monday January 6th.

Why do I get a screen over load on my FM-T or FMi-T TX with less than 100 Volts of screen Voltage? Print

Related Articles