The AM transmitter will be muted with no RF output. The AM 500A and 1A transmitters only have one power supply; most likely it will need to be repaired/replaced. The AM 2.5E, AM 5E, AM 6A, and AM 10A transmitters have multiple power supplies. However, the 120Hz is only supplied by Power Supply #1. You can swap Power Supply #1 with one of the other supplies and get the transmitter back on the air at a reduced power.
What happens if my AM transmitter loses the 120Hz drive signal from Power Supply #1? Print
Modified on: Tue, 8 Oct, 2019 at 10:16 AM
Did you find it helpful? Yes NoSend feedback
Sorry we couldn't be helpful. Help us improve this article with your feedback.